Analogue Systems RS-215 Eight Octave Filterbank


Filterbank module with eight fixed filter frequencies, each one octave apart. It is the successor of the RS-210 which was based on a rare 70ies filter bank from EMS. The newer version has different frequencies for a wider frequency range and the filter have a higher slope.



Filter bank with fixed frequencies of 100Hz, 200Hz, 400Hz, 800Hz, 1.6kHz, 3.2kHz, 6.4kHz and 12.8kHz

Each frequency has a dedicated control attenuating the according filter band. If only one control is turned all the way down, the frequency band will be attenuated -9dB. If all filters are closed then the attenuation is infinite. At maximum position of the control the frequency band´s level is almost unity gain.


Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!

Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.


one signal input and one signal output


3U Analogue Systems module, 12HP wide, approx. 80mm deep
20mA power consumption

0.21 kg
Article Number
availability ? shortly avaliable
€ 19% VAT excl. €189.08 € 19% VAT incl. €225.00
Excl. 19% VAT, Excl. shippingLieferzeit 1