Analogue Systems RS-295 Expander

Overview

Analogue Systems RS-295 expands the RS-290 sampler/delay by a MIDI interface and a second assignable controller.

Views

Details

Using the RS295 samples can be dumped and retrieved using SysEx dumps.

The module is connected to the RS-290 by a flat ribbon cable. See RS-290´s operation manual.

miscellaneous

Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!

Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.

connectors

MIDI In, MIDI Out
3.5mm In for assignable controller

dimensions

3U Analogue Systems module, 6HP wide, 20mm deep
Current draw max. 70mA; module is powered via the RS-290

Weight
0.162 kg
Article Number
AORS295
availability ? immediately available
€ 19% VAT excl. €79.83 € 19% VAT incl. €95.00
Excl. 19% VAT, Excl. shippingLieferzeit 1