AniModule - TikTok

Overview

Tick-tock goes the clock, always in the same steady rhythm... boring. *yawn*. The TikTok module however brings verve into the clock bizness; in just four cute HP it is capable of multiplying and dividing clock signals. Simultaneously! No jumper selectable settings, no either/or but direct outputs for five multipliers and five divisors.

Views

Details

The module can multiply (x2. 3x, x4, x5 and x6) and divide (/2, /3, /4, /5 und /6) clocks simultaneously.
The TikTok is not limited to clocks and pulses - for counting it just requires a risign edge with +1.1V level.
Length of the multiplied signals is fixed to 25ms, the length of divided clocks is depending on the input singal's pulse width
A reset signal sets the divider back to "one".

There are two different counting methods for the divider section, between which you can select with the red M/M button: a musical and a mathematical one.
After a reset the musical method emits an impulse at each divider output at the first clock, the "one" and then starts counting. Example: when dividing thru three there will be an impulse at the /3 ouput on clock 1, 3, 7, 10...
The mathematical method starts counting immediately and emits a pulse at the /x output not before the x-th impulse. Example: output /3 will generate a clock at the 3rd, 6th, 9th, 12th... impulse.

connectors

Clock input, Reset input
multiplier outputs: *2, *3, *4, *5 and *6
divider outputs: /2, /3, /4, /5 and /6

dimensions

3U Eurorack module, 4HP wide, 38mm deep
average power consumption: 40mA @ +12V and 9mA @ -12V
maximum power consumption: 80mA @ +12V and 17mA @ -12V

Weight
0.2 kg
Article Number
ANItik
External Links

This item is discontinued or sold out and no longer available, please feel free to look for comparable new stuff in the following categories.