The circuit is identical to the first VCO of the Cwejman S1 so you can use the module as an LFO, too. Additionally there´s a pre-patched hi-quality ring modulator which you can also use with externals signals of course. Each VCO has a positive and inverted output which provides only one waveform at the same time but 7 different waveforms are available, three of which (!) feature pulse width modulation.<7p>
Hint: Set both VCOs to pulse or „mixed-pulse“ and make only the 2nd VCO audible. Then slowly turn up the FM-Level control on VCO2 and play with the PWM controls... that´s fun. Depending on the setting of frequencies or intervals very expressive sounds can occur.
It features user selectable internal pitch-CV connection via the buss.
Generally all Cwejman modules are shielded from interferences and contain lots of calibration possibilities on the backside, see picture.
Audio-In: 2 x 3,5mm jack (Ringmodulator-In)
Audio-Out: 5 x 3,5mm jack
CV-In: 10 x 3,5mm jack (see big picture).
3U Eurorack module, 20HP wide, 40mm deep
power consumption: 75mA