Items 1 to 25 of 27 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. 4ms Quad Clock Distributor

    Four voltage controlled clock dividers/multipliers. The clock can be external or it can be tapped with the TapTempo button what makes the module great as a master clock generator. Complex rhythmic patterns are easily achieved by patching multiple channels into each other's Div/Mult CV and Reset sockets.

    Details
    4ms Rotating Clock Divider
    availability ? immediately available
    € 19% VAT excl. €209.24 € 19% VAT incl. €249.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. 4ms QCD expander

    The QCD Expander adds lots of functionality to the Quad Clock distributor like an attenuator, an inverted output with three different operation modes and a pulse width/delay control. With the expander the QCD will generate non-linear sequences, self-evolving rhythms, swing/shuffle patterns, humanizing and randomness.

    Details
    4ms Rotating Clock Divider
    availability ? immediately available
    € 19% VAT excl. €133.61 € 19% VAT incl. €159.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. 4ms ROW POWER 30 (white)

    The clean and regulated power solution Row Power 30 offers 30W of power, 1.5A@+12V but sole 0.75A@-12V. It is a good choice for smaller systems (approx. one row of 104HP width).

    The Row Power 30 contains only the module; an external power supply and a power distribution have to be bought separately!

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    availability ? shortly avaliable
    € 19% VAT excl. €108.40 € 19% VAT incl. €129.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. 4ms ROW POWER 40 (black)

    The clean and regulated power solution Row Power 40 offers 40W of power, 1.5A@+12V, 1.25A@-12V. It is a good choice for medium systems (e.g. two row each with 104HP width).

    The Row Power 40 contains only the module; an external power supply and a power distribution have to be bought separately!

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    availability ? shortly avaliable
    € 19% VAT excl. €138.66 € 19% VAT incl. €165.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. 4ms RowPower - barrel jumper cable

    This cable is used for connecting two 4ms RowPower modules in order to pass the external power supply's voltage from one module to the other.

    Details
    Tiptop Audio uZeus MODUL w/ flying bus board--9-
    availability ? immediately available
    € 19% VAT excl. €15.13 € 19% VAT incl. €18.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. 4ms Row Power - Flying Bus Cable (pair, ♂)

    Two "flexible bus boards" with a total of 13 connectors for Eurorack modules. Suitable for TipTop's uZeus and 4ms RowPower.

    Details
    4ms Row Power - Flying Bus Cable male
    availability ?
    € 19% VAT excl. €24.37 € 19% VAT incl. €29.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. 4ms Row Power - Power Brick 90W

    90W strong external power supply for powering the RowPower by 4ms. The power supply can operate several RowPower units.

    Details
    4ms Row Power - Power Brick 90W
    availability ? immediately available
    € 19% VAT excl. €24.37 € 19% VAT incl. €29.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. 4ms Shifting Inverting Signal Mingler (SISM)

    Super practical four-channel voltage manipulator for scaling, attenuating, inverting and mixing signals. Offset can be generated by the SISM as well and the slice function extracts the sums of all positive or negative voltages. Plenty of LEDs show what's going on with your signal.

    Details
    4ms - Shifting Inverting Signal Mingler SISM - front
    availability ? immediately available
    € 19% VAT excl. €155.46 € 19% VAT incl. €185.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. 4ms Modular Row angle connector 30°

    Angle piece for connecting two Modular Row cases in an angle of 30°

    Details
    Pittsburgh Modular - single wood panels
    availability ? immediately available
    € 19% VAT excl. €63.03 € 19% VAT incl. €75.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. 4ms Modular Row angle connector 45°

    Angle piece for connecting two Modular Row cases in an angle of 45°

    Details
    Pittsburgh Modular - single wood panels
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. 4ms Spectral Multiband Resonator

    Extremely versatile resonant filter with six bandpass filters/resonators which have a variable frequency and can even be tuned to scales!! These can be modulated ... and all of a sudden the SMR starts to live, to hover, to move chord structures.
    All that with an incredibly fluid, beautiful, organic, deep sound ... and even in sync to the beat!

    Besides of this you can use it as a tunable 6-band EQ, for pinging/plucking/striking and thus for creating percussive sounds or to quantize audio to certain scales. With two SMRs you can create a vocoder.

    In our eyes and ears this was the highlight of both 2015's NAMM and Musikmesse!

    Details
    Cwejman RES-4
    availability ? shortly avaliable
    € 19% VAT excl. €415.97 € 19% VAT incl. €495.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. 4ms Dual Looping Delay

    Tap Tempo and a Ping input for synchronising delays - this is a feature we really missed so often - until now! Funny stuff like rhythmical delays and loops with different time signatures are done easily with this dual digital, voltage controllable delay module :) The "looping delay" technology used herein features very long storage times up to 88 seconds per channel at 48kHz/16Bit for which reason the module is not only suitable for echos and delays but also as a looper. Per channel there are voltage controllable parameters, a Hold mode for infinite repeats and also feedback up to 110% with a open loop.

    Details
    4ms - Dual Looping Delay
    availability ? immediately available
    € 19% VAT excl. €365.55 € 19% VAT incl. €435.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  13. 4ms Quad Pingable LFO

    The Quad Pingable LFO is a module with four independent LFOs allowing for tempo synchronisation to external signals. Each LFO has a reset, adjustable wave shapes, a mute button and a tap-tempo button.
    It´s compact form factor makes the QPLFO perfect for systems that need plenty of modulation sources.

    Details
    4ms Quad Pingable LFO--1-
    availability ? immediately available
    € 19% VAT excl. €273.11 € 19% VAT incl. €325.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. 4ms VCA Matrix

    The VCA Matrix module by 4ms is a playable 4x4 matrix of 16 VCAs.

    Four CV or audio inputs can be routed in any amount/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons. Suitable as a 4x4 mixer, splitter, as well as dynamic signal router/processor.

    Details
    4ms VCA Matrix
    availability ? immediately available
    € 19% VAT excl. €326.89 € 19% VAT incl. €389.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. 4ms Shuffling Clock Multiplier DIY KIT

    DIYers can build a 4ms Shuffling Clock Multiplier with this kit. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms Shuffling Clock Multiplier  DIY kit
    availability ? immediately available
    € 19% VAT excl. €88.24 € 19% VAT incl. €105.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. 4ms Auto Bass Generator BLANK PCB

    Blank PCB for building an Autonomous Bassline Generator. Components or a build description are not included, just the circuit board.

    Details
    4ms Auto Bass Generator BLANK PCB
    availability ? immediately available
    € 19% VAT excl. €10.08 € 19% VAT incl. €12.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. 4ms Atoner DIY kit

    Do-it-yourself kit for the 4ms Atoner. It contains all parts, a face plate and the unpopulated circuit board. Although the english manual explains the buildup process quite well you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms Atoner DIY kit
    availability ? immediately available
    € 19% VAT excl. €125.21 € 19% VAT incl. €149.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. 4ms Pingable Envelope Generator

    The Pingable Envelope Generator or PEG is a dual digital envelope generator. The duration of one envelope cycle can be forced-to-fit between two "pings". This means that the envelope will perfectly fit into a rhythmical scheme!

    Details
    4ms Pingable Envelope Generator
    availability ? coming soon
    € 19% VAT excl. €318.49 € 19% VAT incl. €379.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. 4ms PEG do-it-yourself kit

    The Pingable Envelope Generator as a DIY kit.

    All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite well but you still should bring some knowledge in electronics and soldering  skills.

    Details
    4ms PEG DIY kit
    availability ? immediately available
    € 19% VAT excl. €184.03 € 19% VAT incl. €219.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. 4ms pedals - Rotating Clock Divider

    Rotating Clock Divider Divide-by-1 to Divide-by-64, on 8 output jacks CV Rotate jack to shift divide-by amount on each jack CV Reset jack to reset/re-sync all jacks Optional break-out panels to expand functionality (MIDI, Auto-reset, selectable Divide-by range)

    Details
    4ms Rotating Clock Divider
    availability ? immediately available
    € 19% VAT excl. €158.82 € 19% VAT incl. €189.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. 4ms RCD breakout module

    The breakout module for the Rotating Clock Divider has to be connected to the internal jumpers of the RCD and allows for switching the division factors, counting direction and automatic reset.

    Details
    4ms RCD breakout module
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. 4ms RCD breakout DIY kit

    The breakout expander module for 4ms´ rotating clock divider as a do-it-yourself kit.

    Details
    4ms RCD breakout DIY kit
    availability ? immediately available
    € 19% VAT excl. €41.18 € 19% VAT incl. €49.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. 4ms Rotating Clock Divider DIY kit

    DIYers can build a 4ms Rotating Clock Divider by themselves. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering  skills.

    Details
    4ms Rotating Clock Divider DIY kit
    availability ? immediately available
    € 19% VAT excl. €88.24 € 19% VAT incl. €105.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. 4ms pedals - Shuffling Clock Multiplier

    Unlike a clock divider, the Shuffling clock multiplier can output a multiplierd, accelerated clock! Three outputs carry a straigh clock, five outputs give you clock signal which can be influenced by the means of shuffling, pushing forward in time or skipping clocks. A CV at the rotate input can alter the multiplication factor of the eight outputs in realtime.

    Details
    4ms Shuffling Clock Multiplier
    availability ? immediately available
    € 19% VAT excl. €158.82 € 19% VAT incl. €189.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. 4ms Breakout module for SCM

    Expansion for the Shuffling Clock Multiplier offering additional possibilities to play with. To be connected with the SCM on the backside.

    Details
    4ms SCM breakout module
    availability ? immediately available
    € 19% VAT excl. €130.25 € 19% VAT incl. €155.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

Items 1 to 25 of 27 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction