Items 1 to 25 of 181 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
  1. Doepfer A-188-2 Tapped BBD Modul

    Delay based on a bucket brigade device (BBD). Six parallel delay taps with single outputs.

    The taps allow maximal delay times of 396, 662, 1194, 1726, 2790 and 3328ms. There are two sections, each allows a individual mixture of the delay taps at mix outputs that have a dry/wet control. CV control of common delay time; complex positive/negative feedback.

    Details
    availability ? immediately available
    € 19% VAT excl. €184.87 € 19% VAT incl. €220.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-188-2  Tapped BBD Modul
  2. Doepfer A-183-1 dual passive attenuator

    dual passive attenuator very senseful for systems with modular combinations of different manufacturers.. where you have internal attenuators sometimes at the output and sometimes at the input stage.

    Details
    availability ? immediately available
    € 19% VAT excl. €29.41 € 19% VAT incl. €35.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-183-1 dual passive attenuator
  3. Doepfer A-182-1 Switched Multiple 3,5mm

    Multiplier module. The module differs from the A-180 as you can find a rocker switch side by side to the socket which assigns the incoming signal to buss 1 or buss 2. All sockets which have the switch in the same position are connected together. So you can connect easily 3 and 5 sockets together or 4 and 4 and configure the multiple as you like.

    Details
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-182-1 Switched Multiple 3,5mm
  4. Doepfer A-181 Multiple 2x 6,3mm - 3,5mm

    Passive adaptor module that converts from 6,3mm (1/4") jack to 3,5mm (1/8"). Either 1x 6,3mm mono --> 2x 3,5mm mono (like a small multiple) or 1x 6,3mm stereo --> 2x 3,5mm mono.

    Details
    availability ? immediately available
    € 19% VAT excl. €33.61 € 19% VAT incl. €40.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-181  Multiple 2x 6,3mm - 3,5mm
  5. Doepfer A-180 Multiple (2x4) 3,5mm

    Passive multiplier module with two sets of four interconnected sockets for splitting signals. By creating a solder bridge even eight sockets can be connected together.

    Details
    availability ? immediately available
    € 19% VAT excl. €25.21 € 19% VAT incl. €30.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-180-1  Multiple 4TE
  6. Doepfer A-178 Theremin Voltage Source

    Now available in a better version. The antenna isn´t atteched to a 1/8" jack anymore but to a much more stable and lockable BNC jack.

    Theremin controller module for generating a variable control voltage by approaching/removing hand to/from an antenna. A gate signal can be generated, too if the voltage exceeds a certain threshold set by the according control. For emulating a thrermin you need two A-178s: one for the pitch and one for the volume.

    Details
    availability ? immediately available
    € 19% VAT excl. €75.63 € 19% VAT incl. €90.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-178 Theremin Voltage Source
  7. Doepfer A-177-2 foot controller

    To control modular parameters easily over footpedals the A-177 is a brilliant help: A connected foot controller in the upper switch generates a control VC, at the other one a dual footswitch can generate two independent trigger/gate voltages for instance. The module has been optimized for the fatar products FP-5 and VFP2, that you can also get from us.

    Details
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-177-2  Foot Controller
  8. Doepfer A-176 Control Voltage Source

    Three independent voltage sources that produce constant (control) voltages. Two of the voltage generators have a control for fine adjustment what is very practical if you want to tune VCOs exaclty. With a little jumper you can decide for each of the three sources if it gives out -2,5v to 2,5v or 0 to 5V !

    Details
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-176  Control Voltage Source
  9. Doepfer A-175 Dual Voltage Inverter

    The dual voltage inverter is exactly what it says it is: two identical inverters, which will take a voltage and output it in an inverted form - so that an input of eg. 5V will be output as -5V at the "inv out". The second input can give you the unprocessed original signal, too. Two LEDs give a visual indication of the (positive or negative) output signal.

    Details
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-175  Dual Voltage Inverter
  10. Doepfer A-174-2 Wheels

    A-174-2 is a modulation wheel module with two wheels. While the left one is centered and spring-loaded like a pitch bend wheel, the right one acts like a classic modulation wheel.

    Details
    availability ? immediately available
    € 19% VAT excl. €58.82 € 19% VAT incl. €70.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-174-2  Wheels
  11. Doepfer A-183-2 VC offset gen./attenuator/pol

    As an offset generator the module supplies a voltage from 0 to 5 or from -5 to 5V, the attenuator can set an incoming signal to be added to the offset voltage, this signal can be inverted in addition making the tiny thing a polarizer module in addition.

    Details
    availability ? shortly avaliable
    € 19% VAT excl. €33.61 € 19% VAT incl. €40.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-183-2  Offset / Att. / Polarizer
  12. Doepfer A-183-3 DC coupled amplifier

    To make the uncounted modules of different manufacturers and/or other units compatible with each other this module has been created: The control voltages are sometimes needed with 5 Volts or even higher to make an envelope start or a sequencer run so here you can lift outgoing lower voltages to that certain level. It can alo be used to amplify your audio signals.

    Details
    availability ? immediately available
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-183-3 DC coupled amplifier
  13. Doepfer A-185-1 Bus Access Modul

    The Bus Access module makes possible to "write" external CV/Gate signals to the internal A-100 bus via 3,5mm sockets. This is recommended when using an external MIDI/CV interface, if you run many VCOs of if you like to have the same bus on several A-100 frames. Additionally you can split the input signal via four buffered outputs.

    Details
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-185-1  Bus Access Modul
  14. Doepfer A-188-1Y BBD 256 Stages

    The A-188-1 series bases on a co-called bucket briogade device (BBD) that has been used in the pseudo-digital BBD-delays.

    The module isn´t an entire delay but only its core with all it´s (sometimes desired) anomalies like eg. cross talk of the internal clock frequency and it´s very independent spacey and raw sound.

    There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.

    The version with 256 stages provides a delay time of 0.51 - 256ms and is great for Karpluss-Strong synthesis.

    Details
    availability ? immediately available
    € 19% VAT excl. €130.25 € 19% VAT incl. €155.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-188-1Y  BBD 256 Stages
  15. Doepfer A-188-1X BBD 128 Stages

    The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.

    The module is NOT an entire delay but only it´s core with all anomalies like eg. cross talk of the internal clock frequency and it´s very independent spacey and raw sound which you just might desire.

    Details
    availability ? immediately available
    € 19% VAT excl. €121.85 € 19% VAT incl. €145.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-188-1X  BBD 128 Stages
  16. Doepfer A-188-1D BBD 4096 Stages

    The A-188-1 series bases on a co-called bucket briogade device (BBD) that has been used in the pseudo-digital BBD-delays.

    The module isn´t an entire delay but only its core with all it´s (sometimes desired) anomalies like eg. cross talk of the internal clock frequency and it´s very independent spacey and raw sound.

    There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.

    The version with 4096 stages provides a delay time of 8.19 - 4096 ms.

    Details
    availability ? immediately available
    € 19% VAT excl. €138.66 € 19% VAT incl. €165.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-188-1D  BBD 4096 Stages
  17. Null
    Null Details
    availability ? immediately available
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-188-1C  BBD 2048 Stages
  18. Doepfer A-188-1B BBD 1024 Stages

    The A-188-1 series bases on a co-called bucket briogade device (BBD) that has been used in the pseudo-digital BBD-delays.

    The module isn´t an entire delay but only its core with all it´s (sometimes desired) anomalies like eg. cross talk of the internal clock frequency and it´s very independent spacey and raw sound.

    There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.

    The version with 1024 stages provides a delay time of 2.05- 1024 ms.

    Details
    availability ? immediately available
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-188-1B  BBD 1024 Stages
  19. Doepfer A-188-1A BBD 512 Stages

    The A-188-1 series bases on a co-called bucket briogade device (BBD) that has been used in the pseudo-digital BBD-delays.

    The module isn´t an entire delay but only its core with all it´s (sometimes desired) anomalies like eg. cross talk of the internal clock frequency and it´s very independent spacey and raw sound.

    There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.

    The version with 512 stages provides a delay time of 1.02 - 512 ms.

    Details
    availability ? immediately available
    € 19% VAT excl. €113.45 € 19% VAT incl. €135.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-188-1A  BBD 512 Stages--9-
  20. Doepfer A-187-1 VC DSP Effects

    Module A-187-1 is a DSP based effects module with voltage control of parameters of effects like delay, reverb, pitch shift or equalizer.

    Details
    availability ? immediately available
    € 19% VAT excl. €210.08 € 19% VAT incl. €250.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-187-1 Voltage Controlled DSP Effects--9-
  21. Doepfer A-186-1 Gate/Trigger Combiner

    This small module combines up to seven gate or trigger signals and sends them to one output; basically it´s a simple passive mixer for gate signals.

    If all seven inputs are "low" there is no gate at the output. When one or more inputs switch to "high", a gate signal occurs at the output.

    Details
    availability ? immediately available
    € 19% VAT excl. €33.61 € 19% VAT incl. €40.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-186-1  Gate/Trigger Combiner
  22. Doepfer A-185-2 Precision Adder / Bus Access

    Precision adder (mixer) and buffer for control voltages. Precision means that  the amplification of the inputs without attenuators is exactly 1.00. When playing VCOs this means a correct tracking of 1V/oct.

    The A-185-2 allows you to send up to four control voltages simultaneously (eg. sequencer and keyboard for transposing sequences) to one or more VCOs. There are three buffered outputs and an inverted one.

    You can also use the A-185-2 as a octave switch because the rocker switches produce a 1V offset voltage when nothing is plugged.

    Details
    availability ? immediately available
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-185-2  Precision Adder / Bus Access
  23. Doepfer A-174-1 Joy-Stick

    The joystick provides two analog control voltages that can be changed simultaneously with the lever. The A-174-1 can generate negative and positive voltages. For each axis (X and Y) there is a separate offset control which sets the desired lowest voltage to be generated.

    Details
    availability ? immediately available
    € 19% VAT excl. €75.63 € 19% VAT incl. €90.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-174-1  Joy-Stick
  24. Doepfer A-172 Max./Min. Selector

    Module for processing/mixing of control voltages. The signals at the four inputs are being mixed together, the outputs give you the current maximum resp. minimum voltage of the sum of the four input signals.

    Details
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-172 Max./Min. Selector
  25. Doepfer A-154 Sequencer Controller

    Expansion module for the A-155 sequencer with following operating modi: forqward, backward, pendulum, random, voltage controlled and one-shot. The first and last step of the sequence as well as tha step lenghth can be set by a control voltage. Integrated clock generator. Two A-155 can be controlled with the A-154 so sequences with 16 steps can be created.

    Details
    availability ? immediately available
    € 19% VAT excl. €142.86 € 19% VAT incl. €170.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

    Doepfer A-154  Sequencer Controller

Items 1 to 25 of 181 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction