Items 1 to 25 of 1063 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
  1. 4ms pedals - Atoner module

    A versatile module used for distorting and bit crushing audio, generating polyrhythmic CV clocks, extracting lower harmonics from audio and pitch shifting/jumping (downwards)

    Details
    4ms Atoner module
    availability ? immediately available
    € 19% VAT excl. €247.90 € 19% VAT incl. €295.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. 4ms Atoner DIY kit

    Do-it-yourself kit for the 4ms Atoner. It contains all parts, a face plate and the unpopulated circuit board. Although the english manual explains the buildup process quite well you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms Atoner DIY kit
    availability ? immediately available
    € 19% VAT excl. €126.05 € 19% VAT incl. €150.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. 4ms pedals - Noise Swash

    The Noise Swash is a chaotic random noise-maker and CV generator, generating its own sounds or working as an audio processor. As a stand-alone device it generates unpredictable continuously morphing oscillations on the Audio Output jack, and random CV fluctuations out the dual-direction "Mood CV" jack.

    Details
    4ms Noise Swash module
    availability ? immediately available
    € 19% VAT excl. €302.52 € 19% VAT incl. €360.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. 4ms Pingable Envelope Generator

    The Pingable Envelope Generator or PEG is a dual digital envelope generator. The duration of one envelope cycle can be forced-to-fit between two "pings". This means that the envelope will perfectly fit into a rhythmical scheme!

    Details
    4ms Pingable Envelope Generator
    availability ? immediately available
    € 19% VAT excl. €315.13 € 19% VAT incl. €375.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. 4ms PEG do-it-yourself kit

    The Pingable Envelope Generator as a DIY kit.

    All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite well but you still should bring some knowledge in electronics and soldering  skills.

    Details
    4ms PEG DIY kit
    availability ? immediately available
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. 4ms pedals - Rotating Clock Divider

    Rotating Clock Divider Divide-by-1 to Divide-by-64, on 8 output jacks CV Rotate jack to shift divide-by amount on each jack CV Reset jack to reset/re-sync all jacks Optional break-out panels to expand functionality (MIDI, Auto-reset, selectable Divide-by range)

    Details
    4ms Rotating Clock Divider
    availability ? coming soon
    € 19% VAT excl. €163.87 € 19% VAT incl. €195.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. 4ms RCD breakout module

    The breakout module for the Rotating Clock Divider has to be connected to the internal jumpers of the RCD and allows for switching the division factors, counting direction and automatic reset.

    Details
    4ms RCD breakout module
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. 4ms RCD breakout DIY kit

    The breakout expander module for 4ms´ rotating clock divider as a do-it-yourself kit.

    Details
    4ms RCD breakout DIY kit
    availability ? immediately available
    € 19% VAT excl. €47.90 € 19% VAT incl. €57.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. 4ms Rotating Clock Divider DIY kit

    DIYers can build a 4ms Rotating Clock Divider by themselves. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering  skills.

    Details
    4ms Rotating Clock Divider DIY kit
    availability ? shortly avaliable
    € 19% VAT excl. €96.64 € 19% VAT incl. €115.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. 4ms pedals - Shuffling Clock Multiplier

    Unlike a clock divider, the Shuffling clock multiplier can output a multiplierd, accelerated clock! Three outputs carry a straigh clock, five outputs give you clock signal which can be influenced by the means of shuffling, pushing forward in time or skipping clocks. A CV at the rotate input can alter the multiplication factor of the eight outputs in realtime.

    Details
    4ms Shuffling Clock Multiplier
    availability ? immediately available
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. 4ms Breakout module for SCM

    Expansion for the Shuffling Clock Multiplier offering additional possibilities to play with. To be connected with the SCM on the backside.

    Details
    4ms SCM breakout module
    availability ? immediately available
    € 19% VAT excl. €130.25 € 19% VAT incl. €155.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. 4ms SCM breakout DIY-kit

    All those people willing to DIY can build a breakout module for the 4ms Shuffling Clock Multiplier by themselves. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms SCM breakout DIY kit
    availability ? immediately available
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. 4ms Shuffling Clock Multiplier DIY KIT

    DIYers can build a 4ms Shuffling Clock Multiplier with this kit. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms Shuffling Clock Multiplier  DIY kit
    availability ? immediately available
    € 19% VAT excl. €96.64 € 19% VAT incl. €115.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. 4ms VCA Matrix

    The VCA Matrix module by 4ms is a playable 4x4 matrix of 16 VCAs.

    Four CV or audio inputs can be routed in any amount/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons. Suitable as a 4x4 mixer, splitter, as well as dynamic signal router/processor.

    Details
    4ms VCA Matrix
    availability ? coming soon
    € 19% VAT excl. €335.29 € 19% VAT incl. €399.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Doepfer A-100 5V adaptor

    5V adaptor for supplying A-113, A-190-1, A-191, some Analogue Systems modules (eg. Comb Filter)  and some Analogue Solutions modules (SD99 and sequencers) with an additional 5V voltage. Provides a maximum current of 100mA.

    CAUTION: Use only ONE 5V-adaptor per bus board, even if you have several consuming modules installed!

    Details
    Doepfer A-100  5V-Adapter
    availability ? immediately available
    € 19% VAT excl. €12.61 € 19% VAT incl. €15.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Doepfer blank panel 1HP (5mm)

    blank panel 1HP (5mm), raw aluminium

    Details
    Doepfer Blindplatte 1TE
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. Doepfer blank panel 1.5HP (7.6mm)

    blank panel 1,5HP (~7,5mm), raw aluminium

    Used to fill the gap between Analogue Solutions modules and others in a Eurorack frame such as the suitcase versions or to fill any other unusual gap in your systems.

    Details
    Doepfer Blindplatte 1,5TE
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Doepfer Blindplatte 2HP / 10mm

    blank panel 2HP (10mm), raw aluminium

    Details
    Doepfer Blindplatte 2TE - 10mm
    availability ? immediately available
    € 19% VAT excl. €2.52 € 19% VAT incl. €3.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. Doepfer blank panel 4HP (20mm)

    blank panel 4HP (20mm), raw aluminium

    Details
    Doepfer Blindplatte 4TE / 20mm
    availability ? immediately available
    € 19% VAT excl. €2.94 € 19% VAT incl. €3.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. Null

    Null Details
    Doepfer Blindplatte 8TE / 41mm
    availability ? immediately available
    € 19% VAT excl. €3.36 € 19% VAT incl. €4.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  21. Doepfer blank panel 42HP (213mm)

    blank panel 42HP (213mm), raw aluminium

    Details
    Doepfer Blindplatte 42TE - 213mm
    availability ? immediately available
    € 19% VAT excl. €8.40 € 19% VAT incl. €10.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Doepfer back panel 84HP

    Back plate for 3U Eurorack. 84hp wide.

    Without power inlet and mounting holes for the power supply (picture is not 100% correct, sorry).

    Details
    Doepfer Rückplatte 84TE 1
    availability ? immediately available
    € 19% VAT excl. €12.61 € 19% VAT incl. €15.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Doepfer backpanel 84HP incl. power inlet

    back plate for power supply. Without PSU; with power inlet, fuse holder, power switch

    Details
    Doepfer Rückplatte mit Netzeingang V2 1
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. Doepfer A-100 Basic-System 1, 19" (PSU3)

    The BS1 is one of many exemplary systems which the Manufacturer configured himself and offers at a special price. In this case the classic use of the modular system as an analogue synthesizer with typical or known sound forms is the main application. The fact that this system with the i.e. trigger delay, already exceeds the possibility of hardwired comparable models by far, is self-understandable due to its great value components. We are happy to recommend a personal composition of a complete 6-unit framework for beginners. And we’re likewise happy to help with the enduring work of researching set ups.

    Details
    Doepfer A-100 Basis-System 1, 230V, 19"-Rack
    availability ? shortly avaliable
    € 19% VAT excl. €1,773.11 € 19% VAT incl. €2,110.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Doepfer A-100 Basic System 1, LC9 (PSU3)

    Doepfer's basic System 1 is a good allrounder complete system for classic subtractive synthesis and more. If has a MIDI/CV interface, sample & hold, clock processors and more. The enclosure used here is a wooden low-cost case LC9, which has a third, unused row for modiles - perfect for expanding the system!

    Details
    Doepfer A-100 Basis-System 1, LC9
    availability ? shortly avaliable
    € 19% VAT excl. €1,689.08 € 19% VAT incl. €2,010.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

Items 1 to 25 of 1063 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction