7 Item(s)

per page

Set Descending Direction
  1. Doepfer A-166 Logic Module

    In this module we find two sections which work with the principles of Boolean Logic. Each has three inputs with their logic states ("1" = high / "0" = low) being compared, combined and finally output at three logic outputs: AND, OR and exclusive OR (EXOR). In addition there are two logic inverters for switching the logic states.
    The A-166 is a really good module for combining and linking digital signals like clocks, triggers and gates.

    Details
    Doepfer A-166  Logic Module
    availability ? immediately available
    € 19% VAT excl. €92.44 € 19% VAT incl. €110.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Doepfer A-186-1 Gate/Trigger Combiner

    This small module combines up to seven gate or trigger signals and sends them to one output; basically it´s a simple passive mixer for gate signals.

    If all seven inputs are "low" there is no gate at the output. When one or more inputs switch to "high", a gate signal occurs at the output.

    Details
    Doepfer A-186-1  Gate/Trigger Combiner
    availability ? immediately available
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Intellijel designs Plog

    The Plog is a 8HP wide logic module, a perfect tool for switching states, gates, triggers and clocks. Plog comprises two programmable logic sections (select one of six different 3 input boolean logic types) as well as a toggle flipflop and data flipflop block. All four sections are linked together via specially planned normallisations. It was primarily designet to create complex sequences eg. derived from a simple gate sequence or clock.

    Details
    Intellijel designs Plog--9-
    availability ? immediately available
    € 19% VAT excl. €189.08 € 19% VAT incl. €225.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Intellijel Designs - OR

    Small passive module with two cascaded OR combine units for mixing gate, clock and logic signals.

    Details
    Intellijel Designs OR
    availability ? immediately available
    € 19% VAT excl. €41.18 € 19% VAT incl. €49.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Low-Gain Electronics - Short Bus v2

    The Short Bus is an OR combiner i.e. a mixer for gate, trigger and clock signals. It has seven inputs that can be routed to one of two outputs or to none.

    Details
    Doepfer A-186-1  Gate/Trigger Combiner
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Mutable Instruments - Kinks

    Once again Mutable Instruments unites three functions blocks, each with various functions, in a small, only four HP wide module: A signal processor with inversion and two types of rectifiers, a logic section which can be used as a minimum/maximum generator and finally a sample&hold with accessible white noise generator.

    Details
    Mutable Instruments - Ripples--9-
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. CG-Products - Add1

    The Add1 contains two identical circuits, which can be employed as adders or comparators. Thanks to high precision and some technical finesse, the module is equally suitable for processing audio material as well as control voltages. – Or a mixture of both. Utilized as adders, each circuit can combine up to three signals with an amplification of 1.0. By sending the same material to several inputs, it is possible to achieve amplification factors of 2.0 or 3.0. In comparator mode, the Add1’s circuits emit +5 V or -5 V, depending on whether the sum of incoming signals is higher or lower than 0 V. The results can be used, for example, as gates respectively triggers or audio pulse waves with variable width.

    Details
    CG-Products - Peak+Hold
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

7 Item(s)

per page

Set Descending Direction