20 Item(s)

per page

Set Descending Direction
  1. Doepfer A-180 Multiple (2x4) 3,5mm

    Passive multiplier module with two sets of four interconnected sockets for splitting signals. By creating a solder bridge even eight sockets can be connected together.

    Details
    Doepfer A-180-1  Multiple 4TE
    availability ? shortly avaliable
    € 19% VAT excl. €29.41 € 19% VAT incl. €35.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Doepfer A-180-2 Multiples 2HP

    2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.

    Details
    Doepfer A-180-2 Multiples 2TE--9-
    availability ? immediately available
    € 19% VAT excl. €29.41 € 19% VAT incl. €35.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Mutable Instruments - Links

    The LINKS module is an utility module consisting of three sections: a buffered multiple, a summer circuit and a 3-channel mixer.

    Details
    Mutable Instruments Links--1-
    availability ? immediately available
    € 19% VAT excl. €57.98 € 19% VAT incl. €69.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Make Noise Multiple

    Passive signal splitter, a so-called multiple. This one matches MakeNoise´s flat black and gold design. It has neun interconnected sockets that can be used in a number of ways due to normalizations: as a 3x3, 1x5 or 1x5-Multiple.

    Details
    Make Noise Mult
    availability ? immediately available
    € 19% VAT excl. €29.41 € 19% VAT incl. €35.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. CG-Products - PCV1

    The Patch Converter 1 alias PCV1 helps you to use your bananafied modular system together with Eurorack. Or vice versa.

    Details
    Trouby Modular JACK8--9-
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. CG-Products - PCV3

    The PCV 3 (alias Patchconverter 3) converts from minijack to 1/4" jack to banana. Interesting for people with several different modular systems, disliking pesky adapter cables.

    Details
    Trouby Modular JACK8--9-
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Doepfer A-180-3 Dual Buffered Multiple

    A buffered multiple is an active multiple circuit which refreshes the input and emiths it at the outputs without signal loss. Because of a normalization you might as well use this dual 1-to-3 multiple as a 1-to-6 multiple.

    Details
    Doepfer A-180-2 Multiples 2TE--9-
    availability ? immediately available
    € 19% VAT excl. €42.02 € 19% VAT incl. €50.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Verbos Electronics - Multiple

    A good old passive 2x4 multiples in only 3HP - the perfect choice for the customer who wants to implement a genuine Verbos splitter his all-Verbos system, alone for the sake of completeness.

    Details
    Doepfer A-180-2 Multiples 2TE--9-
    availability ? shortly avaliable
    € 19% VAT excl. €36.97 € 19% VAT incl. €44.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Trouby Modular JACK8

    Octuple adaptor from 3.5mm sockets to 6.35mm (1/4") sockets. Works in both directions, is passive and great for interfacing an Eurorack system with a 5U system.

    Details
    Trouby Modular JACK8--9-
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. XAOC Devices - Bytom

    Bytom is a triple mixer for gate and trigger signals, a so-called OR-combiner. It consists of three independent sections, each of which can process up to four signals. Switches make coupling the sections possible for mixing up to twelve signals.

    Details
    XAOC Devices - Bytom (Mult / Mix)--9-
    availability ? coming soon
    € 19% VAT excl. €63.03 € 19% VAT incl. €75.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. Doepfer A-181 Multiple 2x 6,3mm - 3,5mm

    Passive adaptor module that converts from 6,3mm (1/4") jack to 3,5mm (1/8"). Either 1x 6,3mm mono --> 2x 3,5mm mono (like a small multiple) or 1x 6,3mm stereo --> 2x 3,5mm mono.

    Details
    Doepfer A-181  Multiple 2x 6,3mm - 3,5mm
    availability ? immediately available
    € 19% VAT excl. €37.82 € 19% VAT incl. €45.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. Doepfer A-182-1 Switched Multiple 3,5mm

    Multiplier module. The module differs from the A-180 as you can find a rocker switch side by side to the socket which assigns the incoming signal to buss 1 or buss 2. All sockets which have the switch in the same position are connected together. So you can connect easily 3 and 5 sockets together or 4 and 4 and configure the multiple as you like.

    Details
    Doepfer A-182-1 Switched Multiple 3,5mm
    availability ? immediately available
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Analogue Systems RS-170 Multiples

    Classic multiples module for splitting signals, e.g. for sending one modulation to different destinations. It contains two passive five-way multiples.

    Details
    Analogue Systems RS-170  Multiples--9-
    availability ? shortly avaliable
    € 19% VAT excl. €54.62 € 19% VAT incl. €65.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  14. Analogue Systems RS-250 Trunk Line

    The RS-250 is basically only a faceplate with ten 3.5mm jacks not connected to anything, not even to each other. On the back all contacts are accessible to make your own solder connections.

    The module makes sense if you want to send e.g signals from your modular system to sockets located in the back of your case. This is a particularly convenient way to make semi-permanent connections to other devices, especially when your modular is installed in a closed rack. It also allows you to connect your modular´s audio outputs to a rackmount patchbay, effects units, or mixer

    Details
    Analogue Systems RS-250  Trunk Line
    availability ? shortly avaliable
    € 19% VAT excl. €46.22 € 19% VAT incl. €55.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Analogue Systems RS-270 Converter

    This passive module is a handy converter between different connector formats: 6.35mm jack (1/4"), 3.5mm jack (1/8"), and phono (alias`RCA` or `cinch`) at channels 3 and 4.

    Details
    Analogue Systems RS-270 Adapter Converter--9-
    availability ? shortly avaliable
    € 19% VAT excl. €74.79 € 19% VAT incl. €89.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Analogue Solutions Adaptor

    Small, passive adaptor module containing two adapters from 3.5mm jack to 6.3mm (1/4") jack.

    Details
    Analogue Solutions Adaptor--9-
    availability ? will be ordered on request
    € 19% VAT excl. €41.18 € 19% VAT incl. €49.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. Intellijel designs Buffered Multiple

    The Buffered Multiple is... well, a buffered multiple. This means you have no loss in signal strength when splitting your signals thru this multiple

    Details
    Intellijel designs Buffered Multiple--9-
    availability ? immediately available
    € 19% VAT excl. €67.23 € 19% VAT incl. €80.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Intellijel Designs Passive Multiples

    The Intellijel PASSIVE MULT is a classic dual multiples module for splitting signals.
    Like the A-180 it has a 2x4 configuration but this module is only 2HP wide! That's much more practical than any 2HP blank panel!

    Details
    Intellijel designs passive Mult module
    availability ? immediately available
    € 19% VAT excl. €26.89 € 19% VAT incl. €32.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  19. WMD buffered multiple

    Three-channel buffered i.e. active multiple, each channel with one input and three outputs. The channels are normalized

    Details
    WMD buffered multiple 1
    availability ? immediately available
    € 19% VAT excl. €83.19 € 19% VAT incl. €99.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  20. Doepfer A-180-2 Multiples 2HP (Vintage Edition)

    Vintage Edition with a black faceplate and custom knobs.

    2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.

    Details
    A-180-2 Multiples 2HP (Vintage Edition)
    availability ? immediately available
    € 19% VAT excl. €29.41 € 19% VAT incl. €35.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

20 Item(s)

per page

Set Descending Direction