Items 1 to 25 of 48 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. Frap Tools - CGM Link Cable (1 Group - 8 Channel)

    In case the supplied link cable for connecting four channels won't be sufficient for your needs this link cable comes in handy. It makes it possible to connect up to eight Channel modules to one Group module.

    Details
    Make Noise Pressure Points CHAIN CABLE--9-
    availability ? immediately available
    € 19% VAT excl. €7.56 € 19% VAT incl. €9.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Vermona - dual buffered attenuator/mixer (1U module)

    This 1U module consists of two active attenuators that offer inversion as well. Then there's a mix function which adds and subtracts the input signals.

    Details
    ERM Midiclock+
    availability ? immediately available
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Vermona - dual buffered multiple/inverter (1U module)

    This 1U module by Vermona is equipped with two active i.e. buffered multiples which offer inversion as well. The left set of multiples has also an offset input, e.g. for transpositions.

    Details
    ERM Midiclock+
    availability ? immediately available
    € 19% VAT excl. €116.81 € 19% VAT incl. €139.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Intellijel Designs - USB ISP Master (Firmware Updater)

    This device makes it possible to update the firmwares on a number of Intellijel modules using a Mac or PC with an USB port and the official Intellijel Firmware Updater application.

    Details
    Intellijel Designs - USB ISP Master
    availability ? coming soon
    € 19% VAT excl. €21.01 € 19% VAT incl. €25.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Tiptop Audio - SyncBus Cable

    The SyncBus cable is used for connecting two TipTop Audio modules in order to communicate via the SyncBus to transmit clock, reset and preset data and to synchronize both units.

    Details
    Make Noise Brains (PP sequencer expander)--9-
    availability ? immediately available
    € 19% VAT excl. €10.50 € 19% VAT incl. €12.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  6. Make Noise blank panel 20HP

    Make Noise blank panel with 20HP width (10.16mm)

    Details
    Make Noise blank panel 10HP--9-
    availability ? immediately available
    € 19% VAT excl. €11.34 € 19% VAT incl. €13.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Synovatron 5ASm2Db (5-into-1 adaptor)

    Adaptor circuit board for connecting up to five Analogue Systems modules to one Eurorack distribution board. It is recpommended for customers operating several ASys modules as it is cheaper than four individual adaptors and it expands the numbers of connectors on your Eurorack buss board.

    Details
    Synovatron ASm2Db-1-
    availability ? immediately available
    € 19% VAT excl. €33.61 € 19% VAT incl. €40.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. KOMA Elektronik - Attenuator Cable

    KOMA's Attenautor Cable does exactly what you would expect it to do: it is able to attenuate a signal with the integreated fader. Doens't cost a fortune and saves you the space passive attenuators would require. Why didn't anyone come up with this idea before?

    Details
    KOMA Elektronik - Kommander--9-
    availability ? coming soon
    € 19% VAT excl. €7.56 € 19% VAT incl. €9.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. The Harvestman - Piston/Firmware Programmer

    This small board allows you for either writing your own sound sets for the Piston Honda on EEPROMS or updating the firmware of older Harvestman modules. In addition you need a PicKit2 programmer, though.

    Details
    /
    availability ? immediately available
    € 19% VAT excl. €32.77 € 19% VAT incl. €39.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. Intellijel designs HUB

    The HUB, a small red box with four sockets is a 3:1 multiples but not in module form. A small magnet inside allows for stacking any number of HUBs.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? shortly avaliable
    € 19% VAT excl. €8.40 € 19% VAT incl. €10.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. 100x nylon washers 3.2mm

    Use these nylon washers to prevent your beloved modules from ugly rack rash when mounting them.

    Details
    /
    availability ? immediately available
    € 19% VAT excl. €2.10 € 19% VAT incl. €2.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. M3x6 module screws (bag with 100 pieces)

    A bag with one hundred M3x6 screws for mounting Eurorack modules.

    Details
    M3x6 module screws
    availability ? immediately available
    € 19% VAT excl. €2.10 € 19% VAT incl. €2.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  13. Analogue Systems - French Connection

    The French Connection combines a conventionel keyboard with other controllers line a string-guided glissando ring á la Ondes Martenot, then a wooden pressure-sensitive button and finally a joystick. The unit produces exclusively control voltages and gates, its enclosure is made of finest walnut wood.

    Details
    Analogue Systems - French Connection
    availability ? immediately available
    € 19% VAT excl. €2,512.61 € 19% VAT incl. €2,990.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  14. Frap Tools - CGM Link Cable (1 Master - 4 Groups)

    Link cable for the CGM Creative Mixer System which allows for connecting up to four CGM Group modules to one CGM Master module. This is the biggest possible configuration for really big and flexible mixer systems with up to eight auxiliaries and 32 channels.

    Details
    Make Noise Pressure Points CHAIN CABLE--9-
    availability ? shortly avaliable
    € 19% VAT excl. €5.04 € 19% VAT incl. €6.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  15. Frap Tools - CGM Link Cable (1 Master - 3 Groups)

    This cable for the CGM Creative Mixer System is used for connecting up to three CGM Group modules to one CGM Master module, resulting in a configuration of maximum 24 channels and six auxiliaries.

    Details
    Make Noise Pressure Points CHAIN CABLE--9-
    availability ? immediately available
    € 19% VAT excl. €4.20 € 19% VAT incl. €5.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  16. Frap Tools - CGM Link Cable (1 Master - 2 Groups)

    This cable for the CGM Creative Mixer System is used for connecting up to two CGM Group modules to one CGM Master module.

    Details
    Make Noise Pressure Points CHAIN CABLE--9-
    availability ? immediately available
    € 19% VAT excl. €3.36 € 19% VAT incl. €4.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  17. Frap Tools - black washers, 3.2mm (100pcs)

    These black nylon washers prevent your beloved modules from ugly rack rash when mounting them.
    Recommended for modules with black faceplates and especially in combination with black screws.

    Details
    /
    availability ? immediately available
    € 19% VAT excl. €8.32 € 19% VAT incl. €9.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  18. Frap Tools - M3x6 Hex screws, black (100 Stück)

    A bag with one hundred black hex socket screws with a round head. For all those who dislike silver screws, especially on black modules.

    Details
    M3x6 module screws
    availability ? immediately available
    € 19% VAT excl. €8.32 € 19% VAT incl. €9.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  19. Analogue Systems - Sorceror

    The Sorceror is the ideal solution for a keyboard-based medium-sized modular system as its beautiful walnut case houses both a 49-key keyboard as well as a cabinet for modules.
    The keyboard in the bottom half features MIDI, CV plus elaborate keyboard and wheel controls, while the upper part is a cabinet with 168HP space for modules. Pretty much like a Demon keyboard with an Apprentice cabinet on top combined in one unit.

    Details
    Analogue Systems - Sorceror
    availability ? shortly avaliable
    € 19% VAT excl. €2,008.40 € 19% VAT incl. €2,390.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  20. Analogue Systems - Demon (with Joystick)

    49 note keyboard controller transforming any modular synthesizer into a performance instrument. With its built in MIDI/CV converter, joystick and portamento, single and multiple triggering features to name a few is ideal for any keyboard-based modular system, whether vintage or new.

    Details
    Analogue Systems - Demon (with Joystick)
    availability ? shortly avaliable
    € 19% VAT excl. €1,000.00 € 19% VAT incl. €1,190.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  21. Erica Synths - Eurorack Cable Holder 30cm

    Solid cable holder made of aluminium, designed especially for thin patch cords like those with 3.5mm plugs. It is 30 cm long and has fifteen slots.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? immediately available
    € 19% VAT excl. €25.21 € 19% VAT incl. €30.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  22. Erica Synths - Eurorack Cable Holder 20cm

    Solid cable holder made of aluminium, designed especially for thin patch cords like those with 3.5mm plugs. It is 20 cm long and has ten slots.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? coming soon
    € 19% VAT excl. €20.17 € 19% VAT incl. €24.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. Future Retro - 512 Touch Keyboard

    The 512 is way more than just a capatitive touch keyboard with 29 touch plates, as it has a variety of musical features. It an act as a keyboard, as an arpeggiator, sequencer, MIDI/CV converter and as MIDI/MIDI converter. Simultaneously it can addresses both MIDI and CV/Gate synthesizers because the 512's parameters are transmiited via the MIDI Out and the 3.5mm sockets.

    Details
    Future Retro - Mondovox
    availability ? immediately available
    € 19% VAT excl. €752.10 € 19% VAT incl. €895.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  24. KOMA Elektronik - Kabelhänger (Size M)

    The medium sized Kabelhänger kills two birds with one stone :
    Another 2HP gap in your system is filled and your, now well-organized, cables hang around like a relaxed sloth.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? immediately available
    € 19% VAT excl. €21.01 € 19% VAT incl. €25.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  25. Expert Sleepers DJ-1000 (MIDI to 3.5mm adaptor cable)

    Adaptor cable for Expert Sleepers modules. One 3.5mm mono jack plug to an inline MIDI socket. Wired for use with the ES-5 or ESX-8GT when generating MIDI from the Silent Way ES-4/5 Controller plug-ins.

    Details
    Analogue Systems - Doepfer Adapterkabel--9-
    availability ? shortly avaliable
    € 19% VAT excl. €5.67 € 19% VAT incl. €6.75
    Excl. 19% VAT, Excl. shippingLieferzeit 1

Items 1 to 25 of 48 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction