13 Item(s)

per page

Set Descending Direction
  1. Moog CP-251 controlprocessor

    The CP 251 Control processor could be described as a small modular system without a synthesizer. 8 modules make the generation and simple editing of various Control Voltages possible, especially optimised for flexible control of the Mooger Fooger modules. But this complex interface of sensible components could be even better used when one always has it by your side. The special mixer, additional hardware LFO and the Lag Processor are tools that every live set activist has missed at one point of his/her life! With its big Jacks and stable desktop design with sockets exclusively on top, and of course it?s decadent wooden side panels it is naturally a product of the modern Moog class.

    Details
    Moog CP-251 Control Processor
    availability ? shortly avaliable
    € 19% VAT excl. €335.29 € 19% VAT incl. €399.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Frap Tools - M3x6 Hex screws, black (100 Stück)

    A bag with one hundred black hex socket screws with a round head. For all those who dislike silver screws, especially on black modules.

    Details
    M3x6 module screws
    availability ? immediately available
    € 19% VAT excl. €8.32 € 19% VAT incl. €9.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  3. Erica Synths - Eurorack Cable Holder 30cm

    Solid cable holder made of aluminium, designed especially for thin patch cords like those with 3.5mm plugs. It is 30 cm long and has fifteen slots.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? coming soon
    € 19% VAT excl. €25.21 € 19% VAT incl. €30.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  4. Erica Synths - Eurorack Cable Holder 20cm

    Solid cable holder made of aluminium, designed especially for thin patch cords like those with 3.5mm plugs. It is 20 cm long and has ten slots.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? coming soon
    € 19% VAT excl. €20.17 € 19% VAT incl. €24.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. M3x6 module screws (bag with 100 pieces)

    A bag with one hundred M3x6 screws for mounting Eurorack modules.

    Details
    M3x6 module screws
    availability ? immediately available
    € 19% VAT excl. €2.10 € 19% VAT incl. €2.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  6. Intellijel Designs - USB ISP Master (Firmware Updater)

    This device makes it possible to update the firmwares on a number of Intellijel modules using a Mac or PC with an USB port and the official Intellijel Firmware Updater application.

    Details
    Intellijel Designs - USB ISP Master
    availability ? coming soon
    € 19% VAT excl. €21.01 € 19% VAT incl. €25.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. The Harvestman - Piston/Firmware Programmer

    This small board allows you for either writing your own sound sets for the Piston Honda on EEPROMS or updating the firmware of older Harvestman modules. In addition you need a PicKit2 programmer, though.

    Details
    /
    availability ? immediately available
    € 19% VAT excl. €32.77 € 19% VAT incl. €39.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  8. Intellijel designs HUB

    The HUB, a small red box with four sockets is a 3:1 multiples but not in module form. A small magnet inside allows for stacking any number of HUBs.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? shortly avaliable
    € 19% VAT excl. €8.40 € 19% VAT incl. €10.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. 100x nylon washers 3.2mm

    Use these nylon washers to prevent your beloved modules from ugly rack rash when mounting them.

    Details
    /
    availability ? immediately available
    € 19% VAT excl. €2.10 € 19% VAT incl. €2.50
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  10. KOMA Elektronik - Kabelhänger (Size M)

    The medium sized Kabelhänger kills two birds with one stone :
    Another 2HP gap in your system is filled and your, now well-organized, cables hang around like a relaxed sloth.

    Details
    KOMA Elektronik - Kommander--9-
    availability ? immediately available
    € 19% VAT excl. €21.01 € 19% VAT incl. €25.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  11. ADDAC cable hanger (zig-zag)

    Cable hanger for Eurorack patch cords. The hanger has eleven diagonal slots for different cables.

    Details
    ADDAC cable hanger (one slot)
    availability ? immediately available
    € 19% VAT excl. €13.45 € 19% VAT incl. €16.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. ADDAC cable hanger (one slot)

    Cable hanger for Eurorack patch cords. Hanger has one long slot for cables.

    Details
    ADDAC cable hanger (one slot)
    availability ? immediately available
    € 19% VAT excl. €12.61 € 19% VAT incl. €15.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  13. Frap Tools - black washers, 3.2mm (100pcs)

    These black nylon washers prevent your beloved modules from ugly rack rash when mounting them.
    Recommended for modules with black faceplates and especially in combination with black screws.

    Details
    /
    availability ? shortly avaliable
    € 19% VAT excl. €8.32 € 19% VAT incl. €9.90
    Excl. 19% VAT, Excl. shippingLieferzeit 1

13 Item(s)

per page

Set Descending Direction