new stuff

23 Item(s)

per page

Set Descending Direction
  1. Tom Oberheim SEM patchpanel

    The reissue of the classic SEM monophonic analog synthesizer expander module.
    Originally released in 1974, the SEM is one of the classic discrete analog synths, with a huge, three-dimensional "fat" tone that must be heard to be believed. Tom's reissue cuts no corners- the circuitry is almost identical to original units. The only component changes were made due to unavailable parts, but the great tone has not been affected. No digital voice circuits, or thin-sounding analog "voice chips" here- only genuine hi-fi fat analog goodness.

    Details
    Tom Oberheim SEM patchpanel--1-
    availability ? immediately available
    € 19% VAT excl. €923.53 € 19% VAT incl. €1,099.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  2. Tom Oberheim - SEM pro

    The SEMpro combines the features of the MIDI-version with additional patch points for voltage controle of important parameters.

    Details
    Tom Oberheim SEM pro--9-
    availability ? immediately available
    € 19% VAT excl. €1,259.66 € 19% VAT incl. €1,499.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  3. Tom Oberheim - Two Voice PRO black (Seriennummer: )

    Tom Oberheim´s personal favorite of his own synths, the TwoVoice is available again! It is very similar to the original form 1975 but some features have been enhanced of course. For example this analog two-voice synthesizer now understands MIDI and the sequencer can be synchronised to MIDI as well. Fifty patch points allow for modulations or connecting to modular synthesizers.

    Details
    Tom Oberheim - Two Voice PRO black (Seriennummer:        )
    availability ? immediately available
    € 19% VAT excl. €3,697.48 € 19% VAT incl. €4,400.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  4. Sherman Filterbank 2 Compact

    A classic, but smaller - The Sherman Filterbank is a powerful analog filtering and distortion unit with a huge frequency range and a killing overdrive behavior. It's easy and FUN to use, live and in the studio processing every sound source, effect mixing, expanding modular systems, etc.

    Details
    Sherman Filterbank 2 classic
    availability ? shortly avaliable
    € 19% VAT excl. €570.59 € 19% VAT incl. €679.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  5. Flame Chord Machine 2

    Musical genius  - The Chord Machine 2 is composed of a chord generator, an arpeggiator and a quantizer. The module creates up to five voices out of one incoming CV signal. They can be spread over a range of eight octaves. 42 preset plus 16 user chords with up to four voices are available for musical experiments. Additionally, they can be switched between first, second and third inversion. All in all, users get access to 232 chords, which are playable within 54 preset and 15 user scales. Transpositions can be done via a CV input.

    The fifth voice of the Chord Machine 2 is meant for arpeggios, which can run in several directions and octave ranges. Alternatively, this channel is usable as a quantizer. Setups can be saved in extensive song lists.

    Details
    Flame Chord Machine
    availability ? immediately available
    € 19% VAT excl. €276.47 € 19% VAT incl. €329.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  6. Vermona - Modular Case 104 Bundle

    Eyecatcher – The Modular Case 104 is a noble looking, wooden Eurorack frame with excellent tech specs. Two 3U rows with a width of 104 HP are waiting to be filled with oscillators, filters and other circuits. The built-in power supply delivers 2000 mA at +12 V and -12 V as well as 500 mA at -5 V. – Enough power, even for extremely hungry circuits. Furthermore, the Vermona case offers two 1U rows. One of them comes filled with buffered attenuators / mixers and multiples / inverters. The other row is covered by a wooden blind panel.

    Details
    Vermona - Modular Case
    availability ? shortly avaliable
    € 19% VAT excl. €839.50 € 19% VAT incl. €999.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  7. Vermona modular - TwinVCFilter

    The twinVCFilter is composed of two high-class multimode circuits, which can be used in a high pass, band pass or low pass mode. Thanks to routing and link options, it is possible to combine the filters in various ways. Gain potentiometers allow users to level and distort signals at the input stages. A mix section can be employed to merge both filter channels.

    The twinVCFilter’s basic nature is voluminous, gentle and very precise. By combining both multimode circuits, users can create a full-blooded -24 dB high pass respectively low pass filter. The module's resonance was optimized to be as stable and musically as possible. High values lead to beefy self-oscillation. In doing so, the filters produce stable sine waves, which are perfectly suited for creating percussion sounds. – An extremely luxurious dual filter.

    Details
    Vermona modular  VCDrive
    availability ? immediately available
    € 19% VAT excl. €326.89 € 19% VAT incl. €389.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  8. Audio Damage - EOS

    Room simulation in studio quality – EOS ist equipped with two superbly sounding reverb algorithms, which can be flexibly edited via an intuitive parameter set. Plate is perfectly suited for refining drum, percussion and effect sounds. SuperHall delivers subtile and cold to voluminous, softly wafting results. – An excellent choice for giving leads, pads and vocals that certain something. Using the freeze function, it is possible to generate huge walls of reverb. In general, EOS can be characterized as a dense sounding effect with high resolution. It is on a par with far more expensive studio processors.

    Details
    Audio Damage - Æverb
    availability ? immediately available
    € 19% VAT excl. €478.15 € 19% VAT incl. €569.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  9. Flame Dual Key

    Dualkey is composed of two modulators with A(H)D, A(S)R and Loop modes. Length and shape of rising / falling edge can be adjusted manually as well as influenced by CV signals. At most, the module emits voltages of +10 V. Additionally the circuits generate a trigger signal after each envelope cycle. Furthermore, they produce gate voltages while active. Besides control inputs, each modulator features a button for manually starting the corresponding envelope.

    Details
    Flame Chord Machine
    availability ? immediately available
    € 19% VAT excl. €167.23 € 19% VAT incl. €199.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  10. Flame MemoSlider

    MemoSlider is a modulation sequencer with eight stages. Users can switch between steps via the module’s fader or the CV input. Depending on the mode of operation chosen, it is possible to do so freely or synchronized to an external clock signal. Additionally, there are trigger and reset connectors for working with the sequencer in a traditional fashion. In this case, the slider can be utilized to alter the playback direction and the number of steps used. – A very cool feature for jam sessions. The step values are adjustable via potentiometers. Two CV outputs emit voltages is the range of 0 V to +10 V and -5 V to +5 V. Glide options make it possible to create soft transitions between steps. While changing between values, the module generates trigger signals. Thanks to a corresponding CV output, the fader is also usable to control other modules.

    Details
    Flame Chord Machine
    availability ? shortly avaliable
    € 19% VAT excl. €192.44 € 19% VAT incl. €229.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  11. Doepfer A-168-1 PWM Generator

    The A-168-1 PWM Generator derives pulse signals with variable width from triangle, saw or sine waveforms. - The perfect expansion for VCOs and LFOs, which don't offer these kind of options themselves. Alternatively, it is possible to process other material with rising and falling edge, for instance control voltages generated by an envelope. The pulse width can be adjusted manually plus there is a CV input. Results are emitted by a normal and an inverted output.

    Details
    Doepfer A-154  Sequencer Controller
    availability ? immediately available
    € 19% VAT excl. €50.42 € 19% VAT incl. €60.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  12. MFB – Nanozwerg Pro

    Small, yet powerful – The Nanozwerg Pro is a semi-modular synthesizer voice for Eurorack systems. It contains one VCO plus sub oscillator and a noise generator, followed by a -12 dB multimode filter and a VCA. Two ADSR envelopes and a LFO bring sounds to life. Eight signal inputs and six outputs plus MIDI / MBUS port allow users to embed the module comfortably in any setup. - If you're in the market for a low priced, yet well sounding and flexible synthesizer voice, the Nanozwerg Pro is a great choice!

    Details
    MFB – Nanozwerg Pro
    availability ? coming soon
    € 19% VAT excl. €210.08 € 19% VAT incl. €250.00
    Excl. 19% VAT, Excl. shippingLieferzeit 2-3 Tage

  13. XAOC Devices - Drezno

    The Drezno is an 8-bit signal processor with AD and DA converter sections. The analog to digital stage translates incoming audio material or control voltages into the binary format. Results are emitted at eight gate outputs. The digital to analog stage works the other way round. Here, 8-bit data is generated based on gate voltages and subsequently converted into analog audio respectively CV material. Incoming as well as outgoing signals can be trimmed via gain and offset sliders. Thanks to the built-in clock generator's high rate of about 2 MHz, there's very little aliasing going on while the module processes audio signals. Alternatively to the internal circuit, external clock signals can be used.

    Drezno's field of application is very wide. The module can be used, for instance, as a bit crusher, a pattern generator, a frequency multiplier or as a signal source, producing complex audio waves or control voltages.

    Details
    XAOC Devices - Drezno
    availability ? immediately available
    € 19% VAT excl. €218.49 € 19% VAT incl. €260.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  14. XAOC Devices - Lipsk

    Lipsk is an expander, designed to complement the Drezno Binary Conversion Komputor. The circuit allows users to invert individual bits of the main module's binary data stream via buttons or gate inputs. - A nifty addition that no Drezno owner should miss out on.

    Details
    XAOC Devices - Lipsk
    availability ? immediately available
    € 19% VAT excl. €126.05 € 19% VAT incl. €150.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  15. Liivatera - Through-Zero VCO

    Nifty analog oscillator with triangle-core design – The Through-Zero VCO is an extremely versatile sound source. It comes equipped with seven audio outputs. Besides standards, there are connectors emitting a half-frequency square wave and a double-frequency sawtooth. For playing the circuit, conducting transpositions and so forth, a total of three CV inputs is available. One of them features an attenuator. Furthermore, the oscillator offers a linear FM input, which can be edited in its sensitivity. The Through-Zero VCO's sync channel is equipped with a threshold parameter and trigger options. Pitch and pulse width potentiometers plus a PWM input complete the module's functional range.

    The Through-Zero VCO shines with classic, analog sound, which can be twisted in a multitude of directions. Especially the thick, very musical results of linear frequency modulations are quite impressive.

    Details
    Doepfer A-111-2  High-End VCO 2
    availability ? coming soon
    € 19% VAT excl. €260.50 € 19% VAT incl. €310.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  16. Liivatera - Quadrature LFO

    The Quadrature LFO comes equipped with eight sine outputs. Their phase is shifted by 45 degrees each. A compression potentiometer allows users to deform the sine waves. For controlling the LFO’s frequency, there is a second knob. Additionally, the module features a CV input plus attenuator and a sync channel. LEDs visualize the module’s work.

    Details
    Doepfer A-111-2  High-End VCO 2
    availability ? coming soon
    € 19% VAT excl. €151.26 € 19% VAT incl. €180.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  17. Liivatera - Noise Source

    Noise Source emits five types of analog noise. A great basis for creating drum sounds or rumbling to breezy effects and atmospheres. Additionally, it is possible to use the module as a modulator.

    Besides all kinds of hissing and swooshing, Noise Source also features a 440 Hz reference tone generator for tuning analog oscillators.

    Details
    Doepfer A-111-2  High-End VCO 2
    availability ? coming soon
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  18. Liivatera – Mixer / Attenuverter / Offset

    Mixer / Attenuverter / Offset is a five-channel Audio and CV processor. Each signal path comes equipped with a bipolar attenuator and an offset generator. Besides processing incoming material, the channels can also be used to produce control voltages. Thanks to normalizations, it is possible to sum up several signal paths. Additionally to individual outputs, there is a mix connector. Here, users can tap off the sum off all channels. The bipolar level potentiometers excel with a very wide zero-point, meaning it is extremely easy to deactivate the attenuation.

    Details
    Doepfer A-111-2  High-End VCO 2
    availability ? coming soon
    € 19% VAT excl. €105.04 € 19% VAT incl. €125.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  19. Liivatera - Sample + Hold

    Liivatera’s Sample & Hold module can also be used as a track & hold circuit with variable threshold. Material for the scanning process is fed to the device via a connector. Clocking the circuit can be done via the built-in LFO or an external clock, trigger respectively gate signal. The low frequency oscillator's sine, triangle and square waves are usable for other purposes as well. Its frequency range goes up into the audio range. For controlling the LFO rate via other modules, there are two CV inputs with 1V per octave characteristic.

    Details
    Doepfer A-111-2  High-End VCO 2
    availability ? coming soon
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  20. Liivatera – Dual VCA / Panner / Mixer

    Excellent sound for little money – Liivatera's Dual VCA comes equipped with two voltage controllable amplifiers. The circuits can work in a linear or an exponential mode of operation. Normalizations allow users to employ the module as a panner or mixer. In terms of sound, the Dual VCA shines with crystal clear, voluminous results. Besides audio material, the amplifiers are also suitable for processing control voltages.

    Details
    Doepfer A-111-2  High-End VCO 2
    availability ? coming soon
    € 19% VAT excl. €100.84 € 19% VAT incl. €120.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  21. Liivatera - Buffered Multiple

    Liivatera's Buffered Switched Multiple is an active signal distributor with six inputs and outputs. The latter are normalized to each other. Users can break the connections by plugging cables into the input sockets. Thanks to this routing concept, it is possible to create a multitude of configurations. The Buffered Switched Multiple is perfectly suited for sensitive material such as pitch CV signals.

    Details
    Doepfer A-111-2  High-End VCO 2
    availability ? coming soon
    € 19% VAT excl. €49.58 € 19% VAT incl. €59.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1 Tag

  22. 1010 Music - FXBox

    Hands-on multi-effects processor – 1010 Music’s FXBox is tailored to the particular needs of live performers. The stereo module features 16 effect algorithms, which can be (de)activated via a touch display, gate inputs or the integrated sequencer. Users are able to combine multiple processing stages. Parameters can be adjusted via rotary encoders or touch gestures on the display. – It is even possible to edit several values at once. Three CV inputs plus a routing matrix allow users to modulate effect parameters. For synchronization, there are MIDI, clock and play inputs. The FXBox’s sound is crystal clear and very modern. – A great tool for spicing up boring drum loops, melodies or atmospheres.

    Details
    Make Noise Phonogene (v.372)--9-
    availability ? immediately available
    € 19% VAT excl. €562.18 € 19% VAT incl. €669.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

  23. T-Rex - Replicator Module

    Tape delay for modular systems – The Replicator makes it possible to add the classic sound of Space Echo and Co to a Eurorack setup. The module utilizes a real tape loop plus record and playback heads to generate effects. The motor’s speed can not only be influenced by a potentiometer, but via a CV input and a tap function as well. Low pass filter, chorus option and adjustable tape saturation allow musicians to create a multitude of sound variations.

    In use, the Replicator shines with creamy, atmospheric results. Pitch and tone of the delays generated are influenced by the time parameter and other settings. Very clever: The characteristic, yet sometimes annoying high frequency loss, which occurs while the motor is running at a slow speed, gets partly compensated by the module. High feedback values make the circuit self-oscillate.

    Details
    Doepfer A-162  Dual Trigger Delay
    availability ? shortly avaliable
    € 19% VAT excl. €713.45 € 19% VAT incl. €849.00
    Excl. 19% VAT, Excl. shippingLieferzeit 1

23 Item(s)

per page

Set Descending Direction

news

This is where you find news about expected arrivals of rarely available goods, new products and promising announcements by all of our manufacturers. Please note that the products mentioned here are not necessarily instantly available, but sometimes we recommend to place an order immediately to make sure you´re not left behind once they become available...