4ms Noise Swash DIY kit


A do-it-yourself kit for the Noise Swash Eurorack module by 4ms. All parts as well as the unpopulated PCB and a face plate are supplied.
Although the english manual explains the buildup process quite well but you still should bring some knowledge in electronics and soldering skills.



Contained in the kit are:

  • a bill of parts
  • a Noise Swash faceplate
  • an unpopulated PCB
  • four 3,5mm jacks with nuts, six switches, six potentiometers with knobs
  • a number of headers, transistors, resistors, semiconductors, etc.
  • flat ribbon cable 16-pin, 20cm long


Technical info about the Noise Swash can be found on the product page of the ready made module.

As with all DIY kits: We are not responsible if your kit does not work or if anything gets damaged. We can´t give advice how to solder or how to build the kit. If you are not sure if you can finish the project, then don´t start.

0.2 kg
Article Number

This item is discontinued or sold out and no longer available, please feel free to look for comparable new stuff in the following categories.