Analogue Systems RS-180 VCA


VCA module with exponential and linear control inputs. This way it can be controlled by any type of control voltages and it is suitable to control both audio signals and CVs.



With the "initial level" controlyou can open the VCA manually what is handy if the modulation signal is bipolar: e.g when doing a tremolo with a sine wave LFO. Tow CV inputs with attenuators are available: The linear one is better when you want to control CV signals or if the modulation signal is a slow LFO. The exponential input is better for punchy, fast modulation, e.g. by an envelope and is also bertter suied when you want to control audio signals.

Two signal inputs make an mixer module obsolete.


Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!

Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.


CV inputs: 1 exponential and 1 linear
2 signal inputs and 1 signal output


3U Analogue Systems module, 12HP wide, 65mm deep
8mA power consumption

0.15 kg
Article Number
availability ? shortly avaliable
€ 19% VAT excl. €116.81 € 19% VAT incl. €139.00
Excl. 19% VAT, Excl. shippingLieferzeit 1