The module makes sense if you want to send e.g signals from your modular system to soeckets located in the back of your case. This is a particularly convenient way to make semi-permanent connections to other devices, especially when your modular is installed in a closed rack. It also allows you to connect your modular´s audio outputs to a rackmount patchbay, effects units, or mixer.
IMPORTANT: The module is available only as an option when purchasing a cabinet
Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
ten 3.5mm (1/8") sockets
3U Analogue Systems module, 6HP wide, ca. 8mm deep
passive module = no power consumption