Analogue Systems RS-270 Converter


This passive module is a handy converter between different connector formats: 6.35mm jack (1/4"), 3.5mm jack (1/8"), and phono (alias`RCA` or `cinch`) at channels 3 and 4.



see above


Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!

Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.


Channels 1 and 2: 6.35mm jack (1/4") and 3.5mm jack (1/8")
Channels 3 and 4: 6.35mm jack (1/4"), 3.5mm jack (1/8") and RCA


3U Analogue Systems module, 12HP wide, 25mm deep
passive module = no power consumption

0.088 kg
Article Number
External Links
availability ? shortly avaliable
€ 19% VAT excl. €66.39 € 19% VAT incl. €79.00
Excl. 19% VAT, Excl. shippingLieferzeit 1