Clock and frequency divider with one signal input and five outputs.
The input accepts any signal within the voltage range of ±10V. The outputs carry square waves from 0-10V. The first one has the input signal´s original frequency, the others have the divisors 1/2, 1/4, 1/8 and 1/16. Each output has a LED showing the frequency; beyond 20Hz they seem to light constantly.
Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
One input. Five outputs with different divisors
3U Analogue Systems module, 6HP wide, 34mm deep
20mA power consumption