The RS376 expands the Polyphonic Harmonic Generator by four CV inputs for controlling parameters of the 370. A potentiometer generating a voltage from -10V to +10V is normalized to the first CV input (Ctrl In 5) what enables you to control a RS370´s parameter manually.
As the RS370 can be used as a MIDI/CV interface, you can use the RS376 to output four programmable MIDI controllers as control voltages.
The expander module has to be connected to the RS370 with a flat ribbon cable.
Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
four CV inputs and four CV outputs
3U Analogue Systems module, 6HP wide
powered by the RS-370