The modulation wheel controls the intensity of the integrated LFO (frequency range 0.15Hz to 45Hz). If a cable is inserted into the external input the LFO will be deactivated and the modulation wheel controls the amount of the external voltage. The modulation is present at the MOD output
The pitch bend wheel generates a voltage at the BEND ouput. Its range is being controlled by the depth potentiometer. Voltage range from -2V to +2V.
The mix output carries a mix of the voltages form the modulation wheel and the pitch bend wheel. The bend wheel has a range of -4.5V to +4.5V at this output.
Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
One input for external signal.
Outputs for modulation wheel, pitch wheel and a mix of both wheels.
3U Analogue Systems module, 12HP wide
max. 70mA power consumption