Archive

Not in production anymore.

The bass drum voice circuitry from theTR-808 in an Eurorack module. Unlike the original you can tune the bassdrum; the attack generated by theTone control is somewhat stronger and in general the module has a slightly own sound.

The HP-01 is an useful audio output module with adjustable master output and headphone output. The three input socket make mixing a number of signals possible.

Keyboard version of the Leipzig-S synthesizer. The sound circuitry with 2 VCOs, one Moog filter, 2 ADSRs and a LFO remained unchanged but additionally there´s a 37-key keyboard with a LCD for editing keyboard parameters.

Affordable and simple basic VCO is 6HP width featuring the most inportant functions. It has CV inputs for frequency and pulse width, waveformwise we´ll find sawtooth and pulse.

Small, passive adaptor module containing two adapters from 3.5mm jack to 6.3mm (1/4") jack.

Not in production anymore.

The BD78 is an accurate replica of the CR78 bass drum sound. Due to its tune control and decay parameters TR808 style Toms and Congas can be produced, too. The BD78 can be tuned way low with long decays.

Not in production anymore.

Drum voice module with the circuitry of the TR-808 cowbell, with expanded parameters like e.g. two separate tune controls for both tone generators

Not in production anymore.

Drum module with the circuitry of the TR-808. Like the original you can control tune and level

Not in production anymore.

Drum voice with the CLAVES circutry from the Roland TR-808.

Analogue Solutions CV-to-MIDI converts two channels of CV and gate information into MIDI note commands.

The module generates 8 trigger signals at 8 jacks in dependancy ofthe value of an incoming voltage.

ATTENTION: the module needs an additional 5V operational voltage!

Eurorack version of the Analogue Solutions Oberkorn³ analog sequencer. If has three tracks of CVs ,two gate tracks and interesting binary step address fuctions. Besides this the module features a voltage controlled clock generator, reset buttons, a transpose input per CV row and also slide at row A and B. Pure sequencer power on 84HP width.

The Europa is a hardware steps sequencer with 16 steps. It can be used for programming melody and drum patterns and outputs besides MIDI analog triggers as well.

Not in production anymore.

Both the open and the closed HiHat sound of the TR808 come in this Eurorack drum voice module.

The Leipzig-S is the improved version of Analogue Solutions´ Leipzig synthesizer. Besides the flat housing which makes it possible to use the unit on a desk, Analogue Solutions added a handy eight-step analog sequencer which can of course be synchronised to MIDI.

Simple and narrow LFO module with two wave forms.

The VCO SUB features an analog VCO with a sub-oscillator section. All three sub-octaves generated by the sub-oscillator are derived from the oscillator´s frequency.

The MT9 is an advanced MIDI to triggering module. It allows triggering of a range of analogue devices; drum voice modules, envelope modules, analogue sequencers, analogue drum machines, and anything else with a gate, trigger or clock input.

The MX224 is a 2 input mixer, inverter and buffer. It can mix audio, control voltages and gates with multiple normal and inverted outputs. Ideal for buffered multiplying signals with no signal drop.

Simple yet very useful small module: a mixer with six unity gain inputs, one normal and one inverted sum output. You can use the module as an inverter, too.

The Oberkorn³ is the recent model of the Oberkorn sequencer series, now in a nice metal housing and many features like internal Clock generator, transpose inputs, MIDI and glide.

Not in production anymore.

Analogue Solutions´ drum sound module for the Eurorack. Reproduction of the circuitry of the TR-808 Rimshot.

Not in production anymore.

Discrete analog drum voice with the circuitry of Roland´s CR-78 snare drum with an additional tune parameter.

Not in production anymore.

Analogue Solutions SD88 is a faithful reproduction of Roland´s TR-808 snare drum with a few extras.

A nice module by Analogue Solutions is the SH-NZ which stands for Sample and Hold  and Noise. And that´s exactly what´s inside.

The SQ-8 is a one-track CV sequencer with 8 steps. As the SQ-8 is an independent sequencer you can run several of them, each with an other clock.

Analogue Solutions SY02 Multimode Filter/VCA A great module with a multimode filter and a VCA.

Monophonic analog synthesizer with the layout of a Oberheim SEM. The Telemark is the semi-modular version of the SEMblance by Analogue Solutions. the new version Telemark v2 now has a ring modulator and a sub oscillator (divder circuit).

Analogue Solutions Tereshkova synth is basically the same as the Vostok but it lacks the pin matrix patch panel and the VU meter.

Not in production anymore.

Analog Eurorack drum module with the circuitry of the Roland TR-808 TomToms wit additional noise parameter

The VCO-RING MOD combines an analog VCO and an independent ring modulator circuit

As a modular synthesizer with the 22x22 pin patch matrix and extraordinary features like 3VCOs, a 8 step sequencer and a joystick, the Vostok Deluxe is clearly a unique workstation. Vostok Deluxe features a bigger case, a spring reverb, sequencer with a step-repeat function, a third LFO and more sockets and attenuators.

The module VU01 is a classic VU meter for displaying input signal strength by a moving needle.

Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

This digital module is specialized in one effect only: thick, juicy and fantastic chorus, thanks to automatic routing ieven in true stereo. It offers internal modulation, feedback and has two different chorus modes whose slightly different sound you might already know from the Audio Damage plug-ins Fluid and Dimensions.
The module's DSP works with proper 24Bit and 48kHz and also the mechanical quality is rock-solid.

Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

Besides true stereo wave shaping the digital Shapes module offers the possiblity to scan one of 16 interpolated wavetables using audio and CV inputs. To do this you can induct any input signal, from a sine oscillator to an entire stereo sum, whereupon the grade of erosion or destruction rises with the complexity of the audio material.

Not in our portfolio anymore

The name already indicates it: the Analog Four by Elekron continas four independent monophonic synthesizers in one unit. Besides the entirely analog voice circuitry with two oscillators and two filters per synth and plenty of modulation possibilities the Analog Four has FX and also a step sequencer that can output CV/gate signals as well.

A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

Item for use and in combination with EoBody2 interface.

A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

artikel for use and in combination with the WIRELESS EoBody interface.

The EoWave Domino is a compact monophonic analog synthesizer with discrete circuitry for an affordable price.

Highlights are the eight-step sequencer and the arpeggiator.

EoMono, the little brother of the EoBody2 is the first USB plugandplay sensor interface of this kind. It gives  you connection for one sensor. This way you can start with sensor applications easily and for a small price. Just control your software´s parameter assigned by yourself with a desired sensor.

Eowave Eomono is compatible with all MIDI softwares! No additional MIDI interface is needed.

The last unit for a super low special price!

The MAGMA, which was called Koma in its prototype stadium, is an analog bassline synthesizer with integrated sequencers, memory and a Roland type low pass filter.

A movement tilt switch. This movement sensor will not detect accelerations but x,y position.

artikel for use and in combination with EoBody2 interface.

This 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters. These 10 cm ribbon are also perfect to emulate faders. artikel for use and in combination with EoBody2 interface.

The EoWave Ribbon is not only a ribbon controller but also a standalone instrument. It contains a digital LoFi-synth with one VCO and frequency modulation.
Besides of that the unit can be used as a controller both for USB-MIDI and control voltages!

This sensor is a shock-sensitive pad, a piezo. Ideal for drums and percussive sensoring. Unit for use and in combination with EoBody2 interface.

50% discount on all remaining EoWave sensors, only as stock lasts (read: as long as delivery status is "immediately available")

A momentary touch switch (temporary, reacting to "on" as long as you press the button) compatible with eobody1 and eobody2 USB8 SensorBox.

artikel for use and in combination with EoBody2 interface.