Archive

This module contains four independent, voltage controlled processors for waveforms und CVs with eight functions in total like VCA, attenuator, offset, clipping and a non-adjustable rectifier with two outputs.

Not in production anymore.

Logic module with two stages, a six-part user-configurable (via front panel buttons), cascaded Logic tree giving up to 4 x NAND, 2x NOR & 1x XOR - and the inverted versions of each of those (AND/OR/XNOR). That's up to a 4x Input, 12x Output Gate, Logic and rhytmic pattern generating analog mega-machine!

Abstract Data´s first Eurorack module is the ADE-10 Reactive Shaper, a multifunctional module for processing audio and control signals by the help of three different circuits: wave shaping, wave folding and feedback.

Multimode filter with a 12dB/octave slope and a discrete layout for a very nice vintage sound. An allpass output and a feedback are special features giving the filter it´s own flavor.

Not in production anymore.

The bass drum voice circuitry from theTR-808 in an Eurorack module. Unlike the original you can tune the bassdrum; the attack generated by theTone control is somewhat stronger and in general the module has a slightly own sound.

The HP-01 is an useful audio output module with adjustable master output and headphone output. The three input socket make mixing a number of signals possible.

Keyboard version of the Leipzig-S synthesizer. The sound circuitry with 2 VCOs, one Moog filter, 2 ADSRs and a LFO remained unchanged but additionally there´s a 37-key keyboard with a LCD for editing keyboard parameters.

Affordable and simple basic VCO is 6HP width featuring the most inportant functions. It has CV inputs for frequency and pulse width, waveformwise we´ll find sawtooth and pulse.

Small, passive adaptor module containing two adapters from 3.5mm jack to 6.3mm (1/4") jack.

Not in production anymore.

The BD78 is an accurate replica of the CR78 bass drum sound. Due to its tune control and decay parameters TR808 style Toms and Congas can be produced, too. The BD78 can be tuned way low with long decays.

Not in production anymore.

Drum voice module with the circuitry of the TR-808 cowbell, with expanded parameters like e.g. two separate tune controls for both tone generators

Not in production anymore.

Drum module with the circuitry of the TR-808. Like the original you can control tune and level

Not in production anymore.

Drum voice with the CLAVES circutry from the Roland TR-808.

Analogue Solutions CV-to-MIDI converts two channels of CV and gate information into MIDI note commands.

The module generates 8 trigger signals at 8 jacks in dependancy ofthe value of an incoming voltage.

ATTENTION: the module needs an additional 5V operational voltage!

Eurorack version of the Analogue Solutions Oberkorn³ analog sequencer. If has three tracks of CVs ,two gate tracks and interesting binary step address fuctions. Besides this the module features a voltage controlled clock generator, reset buttons, a transpose input per CV row and also slide at row A and B. Pure sequencer power on 84HP width.

The Europa is a hardware steps sequencer with 16 steps. It can be used for programming melody and drum patterns and outputs besides MIDI analog triggers as well.

Not in production anymore.

Both the open and the closed HiHat sound of the TR808 come in this Eurorack drum voice module.

The Leipzig-S is the improved version of Analogue Solutions´ Leipzig synthesizer. Besides the flat housing which makes it possible to use the unit on a desk, Analogue Solutions added a handy eight-step analog sequencer which can of course be synchronised to MIDI.

Simple and narrow LFO module with two wave forms.

The VCO SUB features an analog VCO with a sub-oscillator section. All three sub-octaves generated by the sub-oscillator are derived from the oscillator´s frequency.

The MT9 is an advanced MIDI to triggering module. It allows triggering of a range of analogue devices; drum voice modules, envelope modules, analogue sequencers, analogue drum machines, and anything else with a gate, trigger or clock input.

The MX224 is a 2 input mixer, inverter and buffer. It can mix audio, control voltages and gates with multiple normal and inverted outputs. Ideal for buffered multiplying signals with no signal drop.

Simple yet very useful small module: a mixer with six unity gain inputs, one normal and one inverted sum output. You can use the module as an inverter, too.

The Oberkorn³ is the recent model of the Oberkorn sequencer series, now in a nice metal housing and many features like internal Clock generator, transpose inputs, MIDI and glide.

Not in production anymore.

Analogue Solutions´ drum sound module for the Eurorack. Reproduction of the circuitry of the TR-808 Rimshot.

Not in production anymore.

Discrete analog drum voice with the circuitry of Roland´s CR-78 snare drum with an additional tune parameter.

Not in production anymore.

Analogue Solutions SD88 is a faithful reproduction of Roland´s TR-808 snare drum with a few extras.

A nice module by Analogue Solutions is the SH-NZ which stands for Sample and Hold  and Noise. And that´s exactly what´s inside.

The SQ-8 is a one-track CV sequencer with 8 steps. As the SQ-8 is an independent sequencer you can run several of them, each with an other clock.

Analogue Solutions SY02 Multimode Filter/VCA A great module with a multimode filter and a VCA.

Monophonic analog synthesizer with the layout of a Oberheim SEM. The Telemark is the semi-modular version of the SEMblance by Analogue Solutions. the new version Telemark v2 now has a ring modulator and a sub oscillator (divder circuit).

Analogue Solutions Tereshkova synth is basically the same as the Vostok but it lacks the pin matrix patch panel and the VU meter.

Not in production anymore.

Analog Eurorack drum module with the circuitry of the Roland TR-808 TomToms wit additional noise parameter

The VCO-RING MOD combines an analog VCO and an independent ring modulator circuit

As a modular synthesizer with the 22x22 pin patch matrix and extraordinary features like 3VCOs, a 8 step sequencer and a joystick, the Vostok Deluxe is clearly a unique workstation. Vostok Deluxe features a bigger case, a spring reverb, sequencer with a step-repeat function, a third LFO and more sockets and attenuators.

The module VU01 is a classic VU meter for displaying input signal strength by a moving needle.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

This digital module is specialized in one effect only: thick, juicy and fantastic chorus, thanks to automatic routing ieven in true stereo. It offers internal modulation, feedback and has two different chorus modes whose slightly different sound you might already know from the Audio Damage plug-ins Fluid and Dimensions.
The module's DSP works with proper 24Bit and 48kHz and also the mechanical quality is rock-solid.

Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

Besides true stereo wave shaping the digital Shapes module offers the possiblity to scan one of 16 interpolated wavetables using audio and CV inputs. To do this you can induct any input signal, from a sine oscillator to an entire stereo sum, whereupon the grade of erosion or destruction rises with the complexity of the audio material.

This desktop unit is a clone of the wild and nasty filter circuit from the vintage russian Polivoks synthesizer. It is built with genuine russian ICs and the sound circuit is 100% analog.
What makes the Acidbox really briliant is the mighty versatile LFO with synchronisation, tap tempo, plenty of wave forms, waveshaping and tempo multiplication/division. This totally invites you to jam with the unit instantly! Hot stuff!

Great book about the secrets of modular synthesizers. It gives an overwiev anbout module types and how to use them, also including exotic stuff like wave multipliers and vocoders. Great tutorials e.g. on how to create electronic drum sounds with your modular. Suitable both for beginners and advanced users. Comes with an audio CD full of examples.
Unfortunately the book is available in German language only.

No longer available in beech!

Portable and foldable Eurorack case with three rows á 126 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling.
The UNO 126 contains the SILTA power supply solution with 3.75 Ampere, the SEI trunk line module and is supplied with a padded soft bag.

No longer available in beech wood

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.