Archive

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

Details

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Details

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Details

Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

Details

This digital module is specialized in one effect only: thick, juicy and fantastic chorus, thanks to automatic routing ieven in true stereo. It offers internal modulation, feedback and has two different chorus modes whose slightly different sound you might already know from the Audio Damage plug-ins Fluid and Dimensions.
The module's DSP works with proper 24Bit and 48kHz and also the mechanical quality is rock-solid.

Details

Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

Details

Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

Details

Intuitive live sequencer module that produces notes, gates and 3 tempo-synchronised CVs. It offers various clocking options, both input- and output-wise. SD-card memory (4x16 sequences), sequence length up to 64 setps, ratcheting, step repeat, slide, variable gate time per step, integrated mini keyboard with octave switches for easy and precise programming and so many more.

Details

Besides true stereo wave shaping the digital Shapes module offers the possiblity to scan one of 16 interpolated wavetables using audio and CV inputs. To do this you can induct any input signal, from a sine oscillator to an entire stereo sum, whereupon the grade of erosion or destruction rises with the complexity of the audio material.

Details

TWEET is a high pass flter ColourCV for mounting inside a ColourPalette module or other systems which accept Colours. But only the ColourPalette will make possible CV control of the Tweet's parameters.

Details

WOOF is a low pass flter ColourCV for mounting inside Colour Palette module or other systems accepting Colours. But only the ColourPalette will make possible CV control of the Woof's parameters.

Details

Der cvWS is a dualer wave shaper like the one found in the core of the uLFO. The upper unit creates a sawtooth out of sruare and triangle wave, the lower unit makes sine waves. Sounds boring? Then try to FM-modulate it for interesting effects!

Details

This LFO packed with features bases on a "triangle core" VCO and thus is on a par with any full-fledged analog VCO because the 1V/oct input allows for using it as a normal VCO. The tracking ranges a few octaves which is far from bad. There are six different waveform outputs: ramp, pulse, sine, triangle, saw, square and sine shape. All this makes the uLFO one of the most versatile LFOs no the market.

Details

Details

Self-oscillating 2pole state variable filter, 12dB highpass, lowpass and notch, 6dB bandpass, extra control for notch balance

Details

Bubblesound´s VCOb is a really good, rich sounding, stable yet compact fully analog VCO. It´s circuitry is based on the uLFO but with some improvements. It tracks well 4-6 octaves (depending on how picky you are) which is good.

Details

The MMF-1 is one of Cwejman´s best developments. It is a very clean and precise multimode filter partly featuring new filter types like a dual bandpass mode with adjustable spacing of filter peaks and also other filter types.

Details

Module is not in production anymore

High-end stereo ring modulator with integrated phase shifted carrier oscillators. You can use it as a stereo device or as two mono ring modulators.

Details

Spare 19" rack ears for your Cwejman S1Mk2 synth. In case you painted, drilled or lost your original ones. Details

With the aid of this simple yet ingenious accessory it's possible to place recent Elektron machines firmly in two different slopes which adds to the ergonomy in the studio or on stage. Assembly and disassembly is possbile without any tools.
Version with bright edges.

Details

With the aid of this simple yet ingenious accessory it's possible to place recent Elektron machines firmly in two different slopes which adds to the ergonomy in the studio or on stage. Assembly and disassembly is possbile without any tools.
Version in black wood.

Details

Not in our portfolio anymore

The name already indicates it: the Analog Four by Elekron continas four independent monophonic synthesizers in one unit. Besides the entirely analog voice circuitry with two oscillators and two filters per synth and plenty of modulation possibilities the Analog Four has FX and also a step sequencer that can output CV/gate signals as well.

Details

Turn your Erica Sequential Switch into a 8-step analog sequencer with this CV expander.
It combines CV generation with all the functionality of the Sequential Switch like mixing, pausing, random playback, skipping and manual selection of steps.

Details

Details

The ES-2 is a Eurorack module designed for use with software such as Expert Sleepers Silent Way. It takes as inputs CVs from your analogue synths/effects on 3.5mm jacks, and outputs audio signals on 1/4" jacks which you connect to your computer audio interface. You then use the Silent Way CV Input plug-in to interpret the audio signal and output CVs in your DAW for recording, processing etc.

Details

Expert Sleepers´ new module ES-3 converts, in a similar manner as the ES-1, control signals from your DAW (e.g. from software like Volta or Silent Way) to control voltages for your modular system. Unlike the ES-1 it doesn´t use up your audio interface´s analog outputs but it uses the optical output (ADAT Lightpipe standard).

Just connect the ES-3 and the audio interface via an optical cable and output the CVs at the eight minijacks.

Details

The ES-4 is another Expert Sleepers module for converting digital control data from your computer into control voltages. As usual the module is to be connected to your audio interface but in this case you use the S/PDIF socket integrated in almost each laptop computer (and every Mac).

Due to technical restrictions the ES-4 will work only with the Silent Way software (see below).

Details

The ESX-8GT is an gate expander module for Expert Sleepers´ ES-4 to offer eight digital outputs for use as gates, triggers, clocks etc. The Mk1 version is active and can generate gate signals with +12V level.

One last ESX-8GT Mk1 in stock (As of March 11th, 2014)

Details

The DIXIE CTRL is an expansion module for up to four Intellijel Dixie oscillators. It adds attenuators and controls for pulse width and PWM, linear and exponential FM and a main 1V/octave input.

The expander is suitable for both version, the old 4HP wide Dixie and the new Dixie 2 but not for the Dixie 2+.

Details

Another small module from Intellijel is the uFade, a 4HP wide voltage controlled crossfader.

The uFade is a cooperation between Intellijel and the analog guru David G. Dixon.

Details

The µStep is a 4HP dual trigger/gate sequencer for the space-conscious Eurorack system.
Use this module for Beat/trigger sequencing (great for polyrhythms), Control of adsr/asr envelopes, Clock dividing, Swing Clock, Convert Gate to Trigger

Details

Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

Details

All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

Details

Einfach und genial aber vor allem: es funktioniert! Wer als Keyboarder, Percussionist oder DJ  seine laufenden Sequenzer zu human variierendem Tempo oder auch einfach zum DJ-Beat synchronisieren will oder muss, ist mit dem 34oneII-Pedal gut beraten.

Nach einer kurzen Eingewöhnungszeit trifft man die eins und kann auch Temposchwankungen gekonnt abfangen oder aufholen, es werden immer die letzten fünf Taps zur Berechnung des laufenden Tempos benutzt. Wenn man länger als 1 Sekunde auf dem Taster steht, sendet das Pedal auf allen Kanälen einen Stop-Befehl und verbraucht ab sofort nichts mehr von dem Strom der Batterie. Die Lebensdauer des 9V Blocks liegt oberhalb von 50 Stunden.

Details

With the Perc Pro, you can add an acoustic drummer to your setup. In contrast to the counterpart made of flesh and blood, this drum system always plays tight and never gets tired. In addition, Perc Pro doesn’t mind to play everyday items instead of kick, snare, cymbal and so forth. – Bottles, cans or sheets of metal. Lots of stuff works great as a percussion instrument. Simply connect your MIDI or CV / gate equipment and start experimenting. – A great novelty with enormous creative potential!

Details

Expansion module for the ProModular MIIIIX - it upgrades it by four send/returns with voltage controlled dry/wet-mix and bypass. The expander can be used as four additional mixer inputs as well.

Details

Four-channel voltage controlled mixer with saturation, voltage control of panorama and level. Furthermore with an individual output, mute- and solo-buttons per channel. An infinite number of MIIIIX modules can be chained.

At the moment we consider it to be the only alternative to Cwejman's MX-4S!

Details

As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

Details

Phase-out module. Few in stock. Sales only as long as stock lasts.

This module contains four voltage controlled function generators that can be used in pairs, in order to mix them and additionally to create more complex envelopes in quadrature mode. Each channel can be used as an AD envelope or as LFO and also generates pulses.

Details

The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

Details

Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

Details

Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

Details

Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

Details

This MIDI interface definitely stands out because monophonic conversion of MIDI notes (from MIDI In or USB) into CV and gate as well as MIDI Clock to analog clock is one function only. As the USB port in this module can send data too, you might as well convert MIDI data from the DIN socket to USB MIDI (or the other way round) and convert analog clock into MIDI Clock.
Let's read the sentence one again: use your modular system for generating a MIDI master Clock and synchronise for instance your computer to your modular!!!

Details