40 Item(s)

per page

Set Descending Direction
Nur verfügbare anzeigen
  1. Adapter Curetronic module -> Dotcom power

    Power adaptor plug for connecting a Curetronic module to a synthesizers.com power distribution harness.

    Details
    Adapter Curetronic module -> Dotcom power--9-
    former retail price €6.30 (VAT excl.) No longer available!
  2. Adapter Dotcom module -> Curetronic power

    One last in stock. Will not be re-ordered.

    Power adaptor plug for connecting a Dotcom module to a Curetronic power distribution board. Additional +5V needed by some modules is not supported.

    Details
    Adapter Dotcom module -> Curetronic power
    former retail price €6.30 (VAT excl.) No longer available!
  3. Analogue Systems / Cliff - 15cm patchcables (5-Pack)

    Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

    Details
    /
    former retail price €10.92 (VAT excl.) No longer available!
  4. Analogue Systems RS-190 VU-Meter / Inverter

    RS-190 is out of production

    The RS-190 combines a real analog VU meter with an inverter

    Details
    Analogue Systems RS-190  VU-Meter / Inverter Modul
    former retail price €142.02 (VAT excl.) No longer available!
  5. Analogue Systems RS-240 Bode Freq Shifter

    Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

    Details
    Analogue Systems RS-240 Bode Freq Shifter--9-
    former retail price €1,350.00 (VAT excl.) No longer available!
  6. Audio Damage - Boomtschak

    Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

    Details
    Audio Damage - DubJr
    former retail price €478.15 (VAT excl.) No longer available!
  7. Audio Damage - Dimensions

    This digital module is specialized in one effect only: thick, juicy and fantastic chorus, thanks to automatic routing ieven in true stereo. It offers internal modulation, feedback and has two different chorus modes whose slightly different sound you might already know from the Audio Damage plug-ins Fluid and Dimensions.
    The module's DSP works with proper 24Bit and 48kHz and also the mechanical quality is rock-solid.

    Details
    /
    former retail price €276.47 (VAT excl.) No longer available!
  8. Audio Damage - DubJr Mk2

    Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

    Details
    Audio Damage - DubJr
    former retail price €276.47 (VAT excl.) No longer available!
  9. Audio Damage - Proton

    Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

    Details
    Audio Damage - DubJr
    former retail price €335.29 (VAT excl.) No longer available!
  10. Audio Damage - Sequencer 1

    Intuitive live sequencer module that produces notes, gates and 3 tempo-synchronised CVs. It offers various clocking options, both input- and output-wise. SD-card memory (4x16 sequences), sequence length up to 64 setps, ratcheting, step repeat, slide, variable gate time per step, integrated mini keyboard with octave switches for easy and precise programming and so many more.

    Details
    Audio Damage ADM06 Sequencer 1
    former retail price €587.40 (VAT excl.) No longer available!
  11. Audio Damage - Shapes

    Besides true stereo wave shaping the digital Shapes module offers the possiblity to scan one of 16 interpolated wavetables using audio and CV inputs. To do this you can induct any input signal, from a sine oscillator to an entire stereo sum, whereupon the grade of erosion or destruction rises with the complexity of the audio material.

    Details
    /
    former retail price €276.47 (VAT excl.) No longer available!
  12. Black Market Modular - TWEET (Colour CV)

    TWEET is a high pass flter ColourCV for mounting inside a ColourPalette module or other systems which accept Colours. But only the ColourPalette will make possible CV control of the Tweet's parameters.

    Details
    KOMA Elektronik - Kommander--9-
    former retail price €32.77 (VAT excl.) No longer available!
  13. Black Market Modular - WOOF (Colour CV)

    WOOF is a low pass flter ColourCV for mounting inside Colour Palette module or other systems accepting Colours. But only the ColourPalette will make possible CV control of the Woof's parameters.

    Details
    KOMA Elektronik - Kommander--9-
    former retail price €32.77 (VAT excl.) No longer available!
  14. Curetronic 3U Eurorack adaptor

    The 3HE-Adapter module allows for mounting and powering 3U Eurorack modules in 5U modular systems!!

    Besides the possibility to mount Eurorack modules with a width of up to 20HP the 3HE-adapter also provides the correct operational voltages of /-12V and 5V.

    Details
    Curetronic 5HE C03-3HE-Adapter
    former retail price €113.45 (VAT excl.) No longer available!
  15. Cwejman MMF-1 multi-mode filter

    The MMF-1 is one of Cwejman´s best developments. It is a very clean and precise multimode filter partly featuring new filter types like a dual bandpass mode with adjustable spacing of filter peaks and also other filter types.

    Details
    Cwejman MMF-1
    former retail price €442.86 (VAT excl.) No longer available!
  16. Cwejman RM-2S Stereo-Ringmodulator

    Module is not in production anymore

    High-end stereo ring modulator with integrated phase shifted carrier oscillators. You can use it as a stereo device or as two mono ring modulators.

    Details
    Cwejman RM-2S--9-
    former retail price €377.31 (VAT excl.) No longer available!
  17. Cwejman S1 Rackmount Ears

    Spare 19" rack ears for your Cwejman S1Mk2 synth. In case you painted, drilled or lost your original ones. Details
    Cwejman S1 Rackmount Ears
    former retail price €31.93 (VAT excl.) No longer available!
  18. E-RM - Brightside

    With the aid of this simple yet ingenious accessory it's possible to place recent Elektron machines firmly in two different slopes which adds to the ergonomy in the studio or on stage. Assembly and disassembly is possbile without any tools.
    Version with bright edges.

    Details
    ERM Midiclock+
    former retail price €31.09 (VAT excl.) No longer available!
  19. E-RM - Brightside (black)

    With the aid of this simple yet ingenious accessory it's possible to place recent Elektron machines firmly in two different slopes which adds to the ergonomy in the studio or on stage. Assembly and disassembly is possbile without any tools.
    Version in black wood.

    Details
    ERM Midiclock+
    former retail price €24.37 (VAT excl.) No longer available!
  20. Erica Synths - Sequential Switch CV Expander

    Turn your Erica Sequential Switch into a 8-step analog sequencer with this CV expander.
    It combines CV generation with all the functionality of the Sequential Switch like mixing, pausing, random playback, skipping and manual selection of steps.

    Details
    4ms RCD breakout module
    former retail price €96.64 (VAT excl.) No longer available!
  21. Expert Sleepers ES-1 (DB25 version)

    The Expert Sleepers ES-1 Audio/CV Interface is a Eurorack module designed for use with software such as Expert Sleepers Silent Way.

    Connect the DB25 connects to your audio interface with a 25-pole cable equipped with SubD connectors (Tascam TA88 standard) and output the CVs on standard 3.5mm minijacks. When used with the Silent Way AC Encoder software, there is no requirement for the audio interface to be DC-coupled.

    Details
    Expert Sleepers ES-1 DB25
    former retail price €132.77 (VAT excl.) No longer available!
  22. Expert Sleepers ES-2 (acryl front)

    The ES-2 is a Eurorack module designed for use with software such as Expert Sleepers Silent Way. It takes as inputs CVs from your analogue synths/effects on 3.5mm jacks, and outputs audio signals on 1/4" jacks which you connect to your computer audio interface. You then use the Silent Way CV Input plug-in to interpret the audio signal and output CVs in your DAW for recording, processing etc.

    Details
    Expert Sleepers ES-2-2 Acryl--9-
    former retail price €66.39 (VAT excl.) No longer available!
  23. Expert Sleepers ES-3 black acrylic

    Expert Sleepers´ new module ES-3 converts, in a similar manner as the ES-1, control signals from your DAW (e.g. from software like Volta or Silent Way) to control voltages for your modular system. Unlike the ES-1 it doesn´t use up your audio interface´s analog outputs but it uses the optical output (ADAT Lightpipe standard).

    Just connect the ES-3 and the audio interface via an optical cable and output the CVs at the eight minijacks.

    Details
    Expert Sleepers ES-3 mk2 acrylic
    former retail price €184.03 (VAT excl.) No longer available!
  24. Expert Sleepers ES-4 black aluminium

    The ES-4 is another Expert Sleepers module for converting digital control data from your computer into control voltages. As usual the module is to be connected to your audio interface but in this case you use the S/PDIF socket integrated in almost each laptop computer (and every Mac).

    Due to technical restrictions the ES-4 will work only with the Silent Way software (see below).

    Details
    Expert Sleepers ES-4 black aluminium
    former retail price €167.23 (VAT excl.) No longer available!
  25. Expert Sleepers ESX-8GT Mk1 (active)

    The ESX-8GT is an gate expander module for Expert Sleepers´ ES-4 to offer eight digital outputs for use as gates, triggers, clocks etc. The Mk1 version is active and can generate gate signals with +12V level.

    One last ESX-8GT Mk1 in stock (As of March 11th, 2014)

    Details
    Expert Sleepers ES4 gate expander--9-
    former retail price €74.79 (VAT excl.) No longer available!
  26. Intellijel Designs - Dixie CTRL

    The DIXIE CTRL is an expansion module for up to four Intellijel Dixie oscillators. It adds attenuators and controls for pulse width and PWM, linear and exponential FM and a main 1V/octave input.

    The expander is suitable for both version, the old 4HP wide Dixie and the new Dixie 2 but not for the Dixie 2+.

    Details
    Intellijel designs Dixie CTRL--9-
    former retail price €63.03 (VAT excl.) No longer available!
  27. Intellijel designs uFade

    Another small module from Intellijel is the uFade, a 4HP wide voltage controlled crossfader.

    The uFade is a cooperation between Intellijel and the analog guru David G. Dixon.

    Details
    Intellijel designs uFade
    former retail price €117.65 (VAT excl.) No longer available!
  28. Intellijel designs uStep v2

    The µStep is a 4HP dual trigger/gate sequencer for the space-conscious Eurorack system.
    Use this module for Beat/trigger sequencing (great for polyrhythms), Control of adsr/asr envelopes, Clock dividing, Swing Clock, Convert Gate to Trigger

    Details
    Intellijel designs uStep v2
    former retail price €167.23 (VAT excl.) No longer available!
  29. Mungo Enterprises - w0 Arbitrary Oscillator

    Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

    Details
    Mungo Enterprises - w0
    former retail price €503.36 (VAT excl.) No longer available!
  30. Mungo Enterprises - Zoom module

    All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

    Details
    Mungo Enterprises - Zoom module
    former retail price €27.73 (VAT excl.) No longer available!
  31. ProModular - Insert

    Expansion module for the ProModular MIIIIX - it upgrades it by four send/returns with voltage controlled dry/wet-mix and bypass. The expander can be used as four additional mixer inputs as well.

    Details
    Cwejman MX-4S
    former retail price €239.50 (VAT excl.) No longer available!
  32. ProModular - MIIIIX (the only alternative to Cwejman's MX-4S)

    Four-channel voltage controlled mixer with saturation, voltage control of panorama and level. Furthermore with an individual output, mute- and solo-buttons per channel. An infinite number of MIIIIX modules can be chained.

    At the moment we consider it to be the only alternative to Cwejman's MX-4S!

    Details
    Cwejman MX-4S
    former retail price €546.22 (VAT excl.) No longer available!
  33. Sound Study Modular - MIDI 2 CV

    As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

    Details
    Synthrotek - MIDI to CV
    former retail price €75.63 (VAT excl.) No longer available!
  34. Sputnik Modular - Quad Function + Trigger Source

    Phase-out module. Few in stock. Sales only as long as stock lasts.

    This module contains four voltage controlled function generators that can be used in pairs, in order to mix them and additionally to create more complex envelopes in quadrature mode. Each channel can be used as an AD envelope or as LFO and also generates pulses.

    Details
    Intellijel designs quADra--9-
    former retail price €247.90 (VAT excl.) No longer available!
  35. Synthesis Technology - E340 Cloud Generator

    The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

    Details
    Synthesis Technology E340 Cloudgenerator--9-
    former retail price €315.13 (VAT excl.) No longer available!
  36. Synthesis Technology - E350 Morphing Terrarium

    Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

    Details
    Synthesis Technology E350 Morphing Terrarium--9-
    former retail price €335.29 (VAT excl.) No longer available!
  37. Synthrotek - DLY (Delay)

    Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
    Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

    Details
    Synthrotek Echo - front
    former retail price €113.45 (VAT excl.) No longer available!
  38. Synthrotek - Echo

    Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

    Details
    Synthrotek Echo - front
    former retail price €92.44 (VAT excl.) No longer available!
  39. Synthrotek - MIDI to CV

    This MIDI interface definitely stands out because monophonic conversion of MIDI notes (from MIDI In or USB) into CV and gate as well as MIDI Clock to analog clock is one function only. As the USB port in this module can send data too, you might as well convert MIDI data from the DIN socket to USB MIDI (or the other way round) and convert analog clock into MIDI Clock.
    Let's read the sentence one again: use your modular system for generating a MIDI master Clock and synchronise for instance your computer to your modular!!!

    Details
    Synthrotek - MIDI to CV
    former retail price €158.82 (VAT excl.) No longer available!
  40. Synthrotek - Noise Filtering Distribution Board

    This passive bus board's main feature are the noise filtering capacitors located at three locations of the board. They reduce noise and bleedthru between modules and provide for clean signals. 17 connectors for modules are more than competitors' busboards offer.

    Details
    Doepfer A-100 Busplatine
    former retail price €46.22 (VAT excl.) No longer available!

40 Item(s)

per page

Set Descending Direction
Nur verfügbare anzeigen