Archive

This module contains four independent, voltage controlled processors for waveforms und CVs with eight functions in total like VCA, attenuator, offset, clipping and a non-adjustable rectifier with two outputs.

Not in production anymore.

Logic module with two stages, a six-part user-configurable (via front panel buttons), cascaded Logic tree giving up to 4 x NAND, 2x NOR & 1x XOR - and the inverted versions of each of those (AND/OR/XNOR). That's up to a 4x Input, 12x Output Gate, Logic and rhytmic pattern generating analog mega-machine!

Abstract Data´s first Eurorack module is the ADE-10 Reactive Shaper, a multifunctional module for processing audio and control signals by the help of three different circuits: wave shaping, wave folding and feedback.

Multimode filter with a 12dB/octave slope and a discrete layout for a very nice vintage sound. An allpass output and a feedback are special features giving the filter it´s own flavor.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

This digital module is specialized in one effect only: thick, juicy and fantastic chorus, thanks to automatic routing ieven in true stereo. It offers internal modulation, feedback and has two different chorus modes whose slightly different sound you might already know from the Audio Damage plug-ins Fluid and Dimensions.
The module's DSP works with proper 24Bit and 48kHz and also the mechanical quality is rock-solid.

Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

Besides true stereo wave shaping the digital Shapes module offers the possiblity to scan one of 16 interpolated wavetables using audio and CV inputs. To do this you can induct any input signal, from a sine oscillator to an entire stereo sum, whereupon the grade of erosion or destruction rises with the complexity of the audio material.

No longer available in beech!

Portable and foldable Eurorack case with three rows á 126 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling.
The UNO 126 contains the SILTA power supply solution with 3.75 Ampere, the SEI trunk line module and is supplied with a padded soft bag.

No longer available in beech wood

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

The licensed Eurorack version of the programmable mini synthesizer Patchblocks allows the user to to program and to customize the module's behaviour via a intuitive software editor.
Some of the functions the module is capable of are VCO, clock divider, envelope and random generators, counter, shepard generator, sequencer, MIDI converter and many more. It is even possible to use it as a sample player (e.g. for drums) or as an effect.

Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

The first Eurorack module by Snazzy FX is a dual Chaos Oscillator. Unlike normal VCOs it is not intended to produce tonal results but for creating chaotic, wild and unpredictable sounds, modulations and gates.

As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

Flexible durm voice with one VCO and a noise generator with three timbres allows for many percussive sounds. An integrated LFO and a CV input take over frequency modulation duties. The trigger input is dynamic. Actually the DS-M is almost a whole synth voice!

Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

This MIDI interface definitely stands out because monophonic conversion of MIDI notes (from MIDI In or USB) into CV and gate as well as MIDI Clock to analog clock is one function only. As the USB port in this module can send data too, you might as well convert MIDI data from the DIN socket to USB MIDI (or the other way round) and convert analog clock into MIDI Clock.
Let's read the sentence one again: use your modular system for generating a MIDI master Clock and synchronise for instance your computer to your modular!!!

This passive bus board's main feature are the noise filtering capacitors located at three locations of the board. They reduce noise and bleedthru between modules and provide for clean signals. 17 connectors for modules are more than competitors' busboards offer.

Numberz is a USB device that communicates with a software front-end on your PC. It can be used to download Z-DSP programs including the display text to non-volatile blank cards. On the other hand you can plug it in directly into the Z-DSP for realtime programming.

This is the BLACK version of  the Station 252 case called Black Widow. It´s a folding aluminium case from TipTop Audio which gives you three rows of 84HP module space for Eurorack modules.

The power distribution is TipTop Audio´s own powerful Zeus Studio Bus system. A high-quality external brick type power supply from Cincon is included!

This here is the silver version of TipTop Audio´s folding case called Station 252 Silver Bullet.

The power distribution is TipTop Audio´s own powerful ZEUS system. Due to the flat construction of the case the maximum module depth is limited to 46mm but on the other hand the case is small enough to be taken as hand luggage and to be put safely in the overhead locker in an airplane! Perfect transportable case - except when it´s rainy.

discontinued

Cincon manufactures high-quality switching power supplies. They have been recommenden to us by TipTop Audio for using in their Zeus power distribution system.

This power supply gives max. 3.75A current which is sufficient to provide up to two Powered Bus Boards with adherent Passive Bus Boards. Details

running out - just a few left

TipTop Audio Zeus makes up of powerful and complex power supply and power distribution components for DIY-building of Eurorack cases. The whole ZEUS series consists of separate components that form flexible power supply solutions, depending how you combine the separate components.

The Passive BusBoard is the passive component that is to be connected to active power distribution boards.

The Z-DSP is a stereo DSP processor, with 24-bit sampling, 15khz of bandwidth, voltage controlled parameters, and has the ability to be programmed with a powerful assembly language - all in a Eurorack format. The Z-DSP gives you all the tools you need to control and manipulate digital effects to explore the new sonic spectrum DSP is bringing to the modular synth, including; VC digital parameters, VC Mix/Dry, manual and sequential program switching and a pair of VC Feedback-loop path with exposed patch points that let you insert the rest of your modular inside the DSP process.

Trautonium CV/Gate Controller for controlling analog Synths that have CV and gate outputs.

Trautonium CV/Gate Controller for controlling analog Synths that have CV and gate outputs.

The 277M Eurorack module is a nice sounding dual tube VCA. The tubes provide additional harmonics from slight to brutal distortion and produce a nice compression in the low range. Amplitude and overdrive can be voltage controlled and set manually quite precisely.

Not in our product range anymore.

The 333M by Trogotronic is an Eurorack module that generates control voltages on three channels out of an audio signal inserted into the 333M. On one hand it is an Envelope Follower, on the other two nine-step event sequencers.

The M666 by US-american manufacturer Trogotronic truely is devilish module. It´s a synthesizer voice with twin VCOs but it´s a very experimental brutal one. It makes a lots of noise and distortion. External audio signals can be fed thru and destroyed by the module as well.