Archive

The Tinysizer by Anyware Instruments is probably one of the smallest modular syntheiszers in the world. It can be placed upright like a PC monitor with the integrated stand. 340 (!) patchpoints are integrated in the form of high-quality multipoint connectors which are patched by jump wires. 30 of those "micro patchcords" are included, further ones can be purchased in local electronic shops.

Details

Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

Details

This digital module is specialized in one effect only: thick, juicy and fantastic chorus, thanks to automatic routing ieven in true stereo. It offers internal modulation, feedback and has two different chorus modes whose slightly different sound you might already know from the Audio Damage plug-ins Fluid and Dimensions.
The module's DSP works with proper 24Bit and 48kHz and also the mechanical quality is rock-solid.

Details

Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

Details

Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

Details

Besides true stereo wave shaping the digital Shapes module offers the possiblity to scan one of 16 interpolated wavetables using audio and CV inputs. To do this you can induct any input signal, from a sine oscillator to an entire stereo sum, whereupon the grade of erosion or destruction rises with the complexity of the audio material.

Details

Brandon Smith's set of 4 EPROMS with sound banks for the Piston Honda.
You can exchange the pre-installed ROM chips with other ones to get new sounds and wavetables. To install all four Eeproms simultaneously you need a Harvestman ROM expander for the Piston Honda which will give you the possiblitly to have six eeproms installed in your module.

Details

The MMF-1 is one of Cwejman´s best developments. It is a very clean and precise multimode filter partly featuring new filter types like a dual bandpass mode with adjustable spacing of filter peaks and also other filter types.

Details

Module is not in production anymore

High-end stereo ring modulator with integrated phase shifted carrier oscillators. You can use it as a stereo device or as two mono ring modulators.

Details

Spare 19" rack ears for your Cwejman S1Mk2 synth. In case you painted, drilled or lost your original ones. Details

New Cycleboxes will be abvailable early May 2012!

The Cyclebox by Cylonix is a digital wavetable VCO. To be exact it is a dual oscillator with additional sub-oscillator and an extreme frequency range off 22 octaves (!). Besides that there are quadrature outputs, voltage controllable wavesahping and much more. Milions of sounds in one module!

Details

This small expander module for the Cyclebox V2 by Cylonix is manufactured by Intellijel and gives you direct access to some hidden extra functions integrated in the Cyclebox V2. Eight switches allow you for activating different modes like the LFO mode or Mega-Mode-Spread etc.

Details

Not in our portfolio anymore

The name already indicates it: the Analog Four by Elekron continas four independent monophonic synthesizers in one unit. Besides the entirely analog voice circuitry with two oscillators and two filters per synth and plenty of modulation possibilities the Analog Four has FX and also a step sequencer that can output CV/gate signals as well.

Details

Kilpatrick´s K1600 is a duophonic MIDI/CV converter module. It converts your MIDI signals into control voltages, gates, triggers, gates

Details

The K2579 module by Kilpatrick audio is a very complex two-part step sequencer  which can be controlled simultaneously by control voltages and MIDI data. It has a non-volatile memory for sequences and songs and allows for polyphonic or multitimbral use. Many parameters like playback direction gate length, step lenght etc can be controlled and enable rhythically interesting sequences.

Details

You can expect the first synthesizer from Knas to be different and that is what it is: not your typical clean synth. The subrtactive architecture may look very familiar but the 2 VCOs (one is a subharmonic oscillator), the filter and the envelope have a certein twist. The synth has a duophonic ribbon controller, a semi-modular layout, a quantizer, pre-amp, a MIDI/CV interface and even USB.

Details

Expansion module for the E350 Morphing terrarium by Synthesis Technology. It adds two functions that otherwise are only accessible via jupers on the backside of the E350 and has an attenuator in addition.

Details

Out of production.

This module is a so-called OR-combiner i.e. a circuitry that mixes trigger and gate signals. The mutinator contains four, partially normalized channels with each two inputs that can be manually routed or muted. It works great in combination with drum modules and several trigger sources like sequencers etc.

Details

Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

Details

All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

Details

Expansion module for the ProModular MIIIIX - it upgrades it by four send/returns with voltage controlled dry/wet-mix and bypass. The expander can be used as four additional mixer inputs as well.

Details

Four-channel voltage controlled mixer with saturation, voltage control of panorama and level. Furthermore with an individual output, mute- and solo-buttons per channel. An infinite number of MIIIIX modules can be chained.

At the moment we consider it to be the only alternative to Cwejman's MX-4S!

Details

As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

Details

The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

Details

Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

Details

Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

Details

Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

Details

This MIDI interface definitely stands out because monophonic conversion of MIDI notes (from MIDI In or USB) into CV and gate as well as MIDI Clock to analog clock is one function only. As the USB port in this module can send data too, you might as well convert MIDI data from the DIN socket to USB MIDI (or the other way round) and convert analog clock into MIDI Clock.
Let's read the sentence one again: use your modular system for generating a MIDI master Clock and synchronise for instance your computer to your modular!!!

Details

This passive bus board's main feature are the noise filtering capacitors located at three locations of the board. They reduce noise and bleedthru between modules and provide for clean signals. 17 connectors for modules are more than competitors' busboards offer.

Details

Black Locust, the improved successor of the old Stilton Adaptor is a four-channel guitar effects pedal adaptor for your synth, using each channel as a FX send/return for one pedal. It offers gain adjustment and a dry/wet control per channel. Alternatively you can use each channel as a guitar pre-amplifier.
With no external input signals, the four pedals can operate in a closed feedback loop, self-generating audio signals that are impossible to directly control - only influence.

Details

The Double Andore's Mk2-version is also a dual digital envelope, featuring a cycle mode, digital waveshaping, integrated VCAs and cross modulations betweeen channels.
In comparison to the Mk1 the new version is much more reliable and stable but has been improved in a number of ways and the face plate layout is more comprehendible.

Details

The Hertz Donut is a dual digital oscillator. It consists of a main oscillator and a modulation oscillator. Due to internal connections FM and AM between the two oscillators is done very easily. Pushbuttons allow for different routing and tracking options and wave selection.
Besides linear FM there is also possibility of true thru-zero FM which will expand sonic capabilities even more!

Details

Harvestman´s second part of the cooperation with Mr. Vladimir Kuzmin, the inventor of the soviet vintage Polivoks synthesizer, is a sawtooth-based VCO from this machine in the Eurorack form factor.

Details

Dual voltage controlled random generator for pulse signals and pitched digital noise. The design of the module is inspired by the unique sound engine of vintage Atari computers. The MkII version of the Zorlon Cannon is an entirely new circuit and each sub-unit has four individual outputs, a mix output and editable settings per output

Details

Not in production anymore; replaced by Mk2 version.

Another module in the nowadays popolar manner of dual modules. Here a envelope generator with digital waveshaping and a VCA are offered per "channel". The envelope generator has a number of of wavetables for changing it´s shape and probably you will have the possibility to expand the number of wavetables in future, similar to the Piston Honda´s ROMS.
The VCAs can operate in LIN or EXP mode. Crossmodulation between them is possible as well.

Details

Quotile Ultimatum is a quad polarizer mixer module with master offset and a LED-bargraph for displaying 1V steps.

The module has been developed for using it together with the Zorlon Cannon but it will also work for itself with any other signal inserted.

Details