Items 1 to 50 of 82 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Nur verfügbare anzeigen
  1. Synthrotek - Verb

    Charming vintage reverb – Synthrotek’s Verb sounds a little like a spring reverb, a little like a bucket brigade circuit and a little like a saturated tape echo. The effect processor uses three PT2399 ICs to process audio material. Its results can be huge. Subtle modulations give reverbs more liveliness. High doses lead to pitch effects. A mix potentiometer allows users to freely combine dry and wet signals. By influencing this parameter with a fast CV signal, it is possible to create FM-like effects.

    Details
    Befaco - i² Instrument Interface
    former retail price €142.02 (VAT excl.) No longer available!
  2. Synthrotek - Roboto

    Bit crusher, pitch shifter and voice changer in one module – Roboto is a lo-fi effect delivering dirty, voice-like sound alterations. It comes equipped with two modes of operation plus some additional features. Thanks to a built-in pre-amplifier, it is not only possible to use the Roboto with other modules, but synthesizers, drum machines, a microphone or a guitar as well. – A clownish circuit with lots of musical talents.

    Details
    Befaco - i² Instrument Interface
    former retail price €142.02 (VAT excl.) No longer available!
  3. Synthrotek - Noise Filtering Distribution Board

    This passive bus board's main feature are the noise filtering capacitors located at three locations of the board. They reduce noise and bleedthru between modules and provide for clean signals. 17 connectors for modules are more than competitors' busboards offer.

    Details
    Doepfer A-100 Busplatine
    former retail price €46.22 (VAT excl.) No longer available!
  4. Synthrotek - MIDI to CV

    This MIDI interface definitely stands out because monophonic conversion of MIDI notes (from MIDI In or USB) into CV and gate as well as MIDI Clock to analog clock is one function only. As the USB port in this module can send data too, you might as well convert MIDI data from the DIN socket to USB MIDI (or the other way round) and convert analog clock into MIDI Clock.
    Let's read the sentence one again: use your modular system for generating a MIDI master Clock and synchronise for instance your computer to your modular!!!

    Details
    Synthrotek - MIDI to CV
    former retail price €158.82 (VAT excl.) No longer available!
  5. Synthrotek - Echo

    Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

    Details
    Synthrotek Echo - front
    former retail price €92.44 (VAT excl.) No longer available!
  6. Synthrotek - DLY (Delay)

    Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
    Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

    Details
    Synthrotek Echo - front
    former retail price €113.45 (VAT excl.) No longer available!
  7. Synthrotek - ADSR

    A small and snappy envelope generator with some very useful features like global voltage control of the stages' lengths, two modes, self cycling and short minimal times. Very handy are the faders which are so useful with envelopes!

    Details
    Befaco - i² Instrument Interface
    former retail price €83.19 (VAT excl.) No longer available!
  8. Synthrotek - 308 distortion

    Euroracked version of the RAT clone distortion by Synthrotek. It has three parameters, votage control of gain, a selection of clipping diodes and fine vintage sound.
    The name 308 refers to the LM308 single op-amp which is used in this circuit.

    Details
    Trogotronic m11
    former retail price €92.44 (VAT excl.) No longer available!
  9. Synthesis Technology - E350 Morphing Terrarium

    Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

    Details
    Synthesis Technology E350 Morphing Terrarium--9-
    former retail price €335.29 (VAT excl.) No longer available!
  10. Synthesis Technology - E340 Cloud Generator

    The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

    Details
    Synthesis Technology E340 Cloudgenerator--9-
    former retail price €315.13 (VAT excl.) No longer available!
  11. Sputnik Modular - West Coast Random Source

    The West Coast Random Source is a clone of the reverend mother of random, the Buchla 266 Source Of Uncertainty. It generates noise in three timbres, sample & hold, then fluctuating, quantized and stored random voltages and finally an slew limiter. It might be a large module but you won't get more random of all shades from one single module.

    Details
    Sputnik Modular - West Coast Random Source
    former retail price €247.90 (VAT excl.) No longer available!
  12. Sputnik Modular - Oscillator

    Phase-out module. Few in stock. Sales only as long as stock lasts.

    Analog VCO, probably inspired by the Buchla 258. It features frequency modulation, two direct waveform outputs, sub oscillator and a voltage controlled waveshaper, both with individual outputs.

    Details
    Doepfer A-110-2 Basic VCO
    former retail price €209.24 (VAT excl.) No longer available!
  13. Sputnik Modular - Dual Oscillator

    The Dual Oscillator module is Sputnik's interpretation of a buchlidian complex analog oscillator consisting of two generators: a modulation oscllator with standard waveforms which can be used for itself alone but is primarily intended for modulating the main oscillator's parameters. Latter has, besides an adjustable sync, a plethora of possibilities for altering the harmonic spectrum like targeted emphasis of overtones and a wave multiplier. On the whole it's a soundwise wide-band oscillator having a distinct sound.

    Details
    Doepfer A-110-2 Basic VCO
    former retail price €474.79 (VAT excl.) No longer available!
  14. Sound Study Modular - MIDI 2 CV

    As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

    Details
    Synthrotek - MIDI to CV
    former retail price €75.63 (VAT excl.) No longer available!
  15. Orthogonal Devices - ER-102 (Nostalgia)

    We will not be getting this unit anymore because OD has stopped reselling to dealers. Please buy directly.

    The ER-102 expands the already vast number of possibilites of the ER-101 sequencer by awesome functions. Within one snapshot you can now generate parts and recall these via CVs, also you can generate groups of steps that can be transformed and modulated. The recording function e.g. allows for real-time recording and overdubs. Storage and firmware updates vie memory cards is possible as well.

    Nostalgia version with white print on dark grey powder coated faceplate.

    Details
    Orthogonal Devices - ER-102 (People's Choice)
    former retail price €469.75 (VAT excl.) No longer available!
  16. Mungo Enterprises - Zoom module

    All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

    Details
    Mungo Enterprises - Zoom module
    former retail price €27.73 (VAT excl.) No longer available!
  17. Mungo Enterprises - w0 Arbitrary Oscillator

    Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

    Details
    Mungo Enterprises - w0
    former retail price €503.36 (VAT excl.) No longer available!
  18. Medic Modules - EKG

    The EKG is a versatile analog sequencer module with a funky voltage controllable halftime function and not less than eight selectable functions per step (pause, skip, up to 4x repeat, reverse, reset).

    Details
    Medic Modules - EKG -- front
    former retail price €251.26 (VAT excl.) No longer available!
  19. Medic Modules - Defibrillator (blood version)

    The first module from the Medic Modules series is the DEFIBRILLATOR. It consists of thee individual circuits: two MS-20 filters and a VCA. Very individual is the operation by illuminated faders and the very unique bloody artwork. Sounds kind of sick and nasty.

    Details
    Medic Modules - Defibrillator--9-
    former retail price €251.26 (VAT excl.) No longer available!
  20. Malekko Wiard XMIX

    The XMIX module is versatile mixer module which you can use as a voltage controlled crossfader or a VCA.
    The module is another cooperation between Malekko and Grant Richter from Wiard.

    Details
    Malekko  Wiard XMIX--9-
    former retail price €142.02 (VAT excl.) No longer available!
  21. Malekko Switch

    Dual A/B switch module with a common gate switch input and a pushbutton for manual switching,

    3U Eurorack module. module width 4HP

    Details
    Malekko Switch
    former retail price €74.79 (VAT excl.) No longer available!
  22. Malekko Fade

    Voltage controlled crossfade module with vactrol-based, voltage controlled level

    Details
    Malekko  Fade--9-
    former retail price €105.04 (VAT excl.) No longer available!
  23. Malekko - Wiard Borg 1 (white)

    Out of production.

    The Borg Filter – A hybrid of Buchlas Lowpass Gate 292 und and the high-/lowpass filter of the Korg MS 20 (but without individual controls for resonance and cutoff) is a very interesting and aggressive filter which can be used as a VCA as well.

    Differences between Borg1 and Borg2:
    The Borg 1 has white knobs. It is the as the original blue Wiard 300 series 6U module. It is softer in sound and more percussive, has a longer decay time [by x10] and a more mellow hollow tone. It sounds rather like a classic lopass gate.

    Details
    /
    former retail price €205.88 (VAT excl.) No longer available!
  24. Malekko - Wiard Boogie filter

    The Malekko Wiard Boogie Filter is a lowpass filter and the offical licenced Version of the 1212A Wiard Module.
    Just like the Borg the Boogie Filter also has an vactrol based cicuit. It has four different slope outputs: -6db, -12dB, -18dB and -24dB per octave.

    Details
    Malekko  Wiard Boogie filter--9-
    former retail price €209.24 (VAT excl.) No longer available!
  25. Malekko Richter Mega-Wave

    The Richter Mega-Wave is a wavetable lookup module for processing and distorting signals by 8Bit wave tables. It contains wave forms of the original Wiard Mini-Wave.

    Details
    Malekko Richter Mega-Wave
    former retail price €289.92 (VAT excl.) No longer available!
  26. Innerclock Systems SyncGen2 PRO

    The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

    Details
    Innerclock Systems SyncGen2 PRO--9-
    former retail price €533.61 (VAT excl.) No longer available!
  27. Innerclock Systems Sync-Shift MkIII

    Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

    Details
    Innerclock Systems Sync Shift Mk3
    former retail price €394.12 (VAT excl.) No longer available!
  28. Innerclock Systems - SyncGen2 LS (Eurorack)

    Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
    The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

    Details
    Innerclock Systems SyncGen2 LS module
    former retail price €495.80 (VAT excl.) No longer available!
  29. Grayscale - Synapse

    The CV output sockets on Elektron's Analog Four and Analog Keys machines emit two control voltages simultaneously but if you want to use the CVs with your Eurorack system it's almost impossible to find correct adaptor cables (1/4" TRS to 2x 3,5mm TS insert cables). Here the Synapse module comes into play: It provides for this format conversion and displays signals with bicolor-LEDs.

    Details
    Doepfer A-180-2 Multiples 2TE--9-
    former retail price €116.81 (VAT excl.) No longer available!
  30. Grayscale - Binary

    The Binary is a 1Bit analog computer module, taking up to six inputs and determining if the output goes high or not. In the first instance you will use this module as an "OR combiner" i.e. a mixer for gates, clocks etc. Great for creating new trigger sequences.
    The module can be set to a NOR mode as well, allowing for a S-Trig conversion (or vice versa). The entirely analog design makes it possible to use audio signals.

    Details
    Grayscale - Binary
    former retail price €105.04 (VAT excl.) No longer available!
  31. Frequency Central - Waverider Mk1

    Out of production. One last in stock. Sales only as long as stock lasts.

    Digital wavetable VCO with a bank of 16 waveforms. Plus an unusual sub oscillator, a bit crusher and switchable glide. Almost all parameters are voltage controllable.

    Details
    Mutable Instruments - Braids--9-
    former retail price €273.11 (VAT excl.) No longer available!
  32. Erica Synths - Pico VCA

    The Pico VCA is composed of two linear amplifiers, which can be utilized for processing audio material as well as control voltages. The circuits are based on LM13700 type op-amps. Thanks to normalizations, it is very easy to use the VCAs in parallel or as part of a stereo setup.

    Details
    Doepfer A-138p Performance Mixer (Input)
    former retail price €66.39 (VAT excl.) No longer available!
  33. Erica Synths - Pico A Logic

    A Logic is an analog logic module, which determines the sum and difference of two signals. Additionally, the circuit generates minimum and maximum curves based on incoming material. – A great partner for creating complex control voltages. Feeding audio material into A Logic results in ring modulator and wave shaper effects.

    Details
    Doepfer A-138p Performance Mixer (Input)
    former retail price €69.75 (VAT excl.) No longer available!
  34. Erica Synths - Fusion VCF (v1)

    Resonant, voltage controlled tube lowpass filter with a wide range of sonic possibilities from juicy tube sound over extreme, distorted sounds up to self-resonating screams.

    Details
    Manhattan Analog MA35 VCF/A--9-
    former retail price €284.87 (VAT excl.) No longer available!
  35. Erica Synths - Fusion Delay & Chorus (v1)

    Not in production anymore.

    Analog tube effect module based on a bucket brigade delay chip. It combines the wide, deep delay and chorus effect with the characteristic sound of a tube saturation. Modulation of delay time is possible by CVs or the integrated LFO.

    Details
    Erica Synths - Fusion Delay & Chorus
    former retail price €289.92 (VAT excl.) No longer available!
  36. Erica Synths - Black VCA

    Erica's Black VCA is a very nice HiFi-VCA for audio signals, able to handle and to attenuate control voltages with very high amplitudes and with it's 2nd CV input featuring a smooth fading between linear and logarithmic characteristic.

    Details
    Erica Synths - Black VCA
    former retail price €150.42 (VAT excl.) No longer available!
  37. Erica Synths - Black Varishape VCO 2

    The Black Varishape VCO2 is the twin of the VCO1, but it lacks the X-Mod FM which has been replaced by a detune control. For that reason it's suited as the secondary or tertiary oscillator in a Erica Synths system. Besides this it is also a neat VCO from the Russian Polivoks synth, featuring a transistor based suboscillator besides a bi-polar waveform mixer for creating new waveforms.

    Details
    Erica Synths - Black Varishape VCO 1
    former retail price €264.71 (VAT excl.) No longer available!
  38. Erica Synths - Black Varishape VCO 1

    Coming staight from the Russian vintage synthesizer Polivoks, this analog oscillator has a wide frequency range, a transistor-based suboscillator plus the bi-polar waveform mixer, allowing you to mix the waves with correct or inverted phase and to create plenty new waveforms this way.
    But the very unique feature of the 1st of the two available Black Varishape VCOs is a special frequency modulation called X-mod.

    Details
    Erica Synths - Black Varishape VCO 1
    former retail price €268.91 (VAT excl.) No longer available!
  39. Erica Synths - Black Stereo Mixer V2

    The Black Stereo Mixer V2 is an excellent choice for merging mono and stereo signals inside a modular synthesizer. The module offers four channels, each of which comes equipped with a potentiometer for controlling the volume as well as a level LED. The first three instances feature stereo audio paths. Thanks to merge functions, it is also possible to use two of these channels with separate mono signals. A boost option allows the user to raise the volume by +6 dB. The fourth audio path is meant for mono material only. It is equipped with a CV input for panorama modulations.

    Details
    Doepfer A-138p Performance Mixer (Input)
    former retail price €130.25 (VAT excl.) No longer available!
  40. Erica Synths - Black Hole DSP

    Digital stereo effect processor with 16 custom effects, dry/wet control and adjustable clock rate reduction. Each effect has two different parameters. The module is entirely voltage controllable, even the effect program selection.
    Included are various delays, from conventional ones over some with pitch shifting to granular delays but also reverbs filter /saturation and a chorus are supplied.

    Details
    Erica Synths - Black VCA
    former retail price €252.10 (VAT excl.) No longer available!
  41. Doepfer power supply, toroidal transformer, 1200mA (230V)

    Running out. Few in stock. Will be replaced by PSU3 in January 2016.

    Stabilized power supply with a toroidal transformer. Maximum current 1200mA per rail.
    This power supply is used in all Doepfer cases and thus is a correct spare part but might as well be used for creating your own power solution.

    CAUTION: Mounting only by qualified personnel only because of electrical safety (dangerous mains voltage 230V)

    Details
    Doepfer Netzteil, 1200mA, Montage nur Fachmann
    former retail price €84.03 (VAT excl.) No longer available!
  42. Doepfer Monster Case DUAL = 2x 4x168HP (230V)

    Not in production anymore.

    Two big 4x186HP wide monster flightcases for mounting 3U Eurorack-modules. Each of the two cases contains 4 power supplies with 1200mA power (230V mains), 8 bus boards and four rows at 168 HP. Total: 1344HP module space.

    Details
    Doepfer Monsterkoffer doppelt 2x672TE
    former retail price €2,016.81 (VAT excl.) No longer available!
  43. Doepfer low cost case LC6 (230V)

    Not in production anymore. Has been replaced by a version with a stronger power supply.

    Simple wooden cabinet in 6U for mounting Eurorack modules. It offers two rows á 84HP and a 230V power supply with a toroidal transformer.

    Details
    Doepfer 2 x 84TE  Low-cost suitcase LC6
    former retail price €218.49 (VAT excl.) No longer available!
  44. Doepfer CV/Gate Keyboard mit Metallgehäuse - NEU

    running out. one last unit in stock. Sale only as long as stock lasts.

    affordable well done keyboard over four octaves with cv/gate interface onboard, still with midi, black descent, with a simple menu to edit, no pitch or modwheels.

    Details
    CV/Gate Keyboard mit Metallgehäuse
    former retail price €294.12 (VAT excl.) No longer available!
  45. Doepfer A-192 CV-to-Midi interface

    A-192 converts 16 control voltages into 16 arbitrary MIDI controllers on arbitrary MIDI channels.  128 different assignments (Presets) of the 16 CV inputs to MIDI controller messages are available.  MIDI messages appearing the MIDI Input are merged to the MIDI controller messages generated by the A-192.

    The snapshot button transmits the 16 momentary states of the 16 inputs as MIDI controller messages.

    Details
    Doepfer A-192-1  CV-to-Midi interface
    former retail price €105.04 (VAT excl.) No longer available!
  46. Doepfer A-190-1 Midi/CV-interface

    RUNNING OUT. Not in prouction anymore. Just a few units left.

    MIDI/CV-interface with CV output 1 (12bit) for pitch, free assignable CV output 2 (7bit), gate-, reset-, clock output. Internal clock divider and digital LFO that follows the MIDI clock. Glide, pitch bend and others switchable with MIDI commands.

    CAUTION! The module needs an additional 5V power supply!  For example Doepfer´s 5V adaptor (order number A-100AD5).

    Eurorack module, 10HP wide.

    Details
    Doepfer A-190-1  Midi/CV-interface
    former retail price €134.45 (VAT excl.) No longer available!
  47. Doepfer A-174-1 Joy-Stick

    The joystick provides two analog control voltages that can be changed simultaneously with the lever. The A-174-1 can generate negative and positive voltages. For each axis (X and Y) there is a separate offset control which sets the desired lowest voltage to be generated.

    Details
    Doepfer A-174-1  Joy-Stick
    former retail price €100.84 (VAT excl.) No longer available!
  48. Doepfer A-171 VC Slew Limiter

    Two separate slew limiters for generating portamento effects. Abrupt changes of a signal can be "smoothed" this way.
    The steepness of the waveform´s slope can be controlled manually and with a control voltage.

    Details
    Doepfer A-171  VC Slew Limiter
    former retail price €50.42 (VAT excl.) No longer available!
  49. Doepfer A-164-1 Manual Gate

    Module with three buttons that provide a gate signal at their outputs when pressed.

    Details
    Doepfer A-164-1  Manual Gate
    former retail price €50.42 (VAT excl.) No longer available!
  50. Doepfer A-147 VC LFO

    phase-out model

    The A-147 is a LFO which frequency can be modulated with a control voltage. It provides a retrigger input, a CV input with attenuator and following waveforms: triangle, sine, symmetrical suare and falling sawtooth. Frequency range: 0.015Hz - 150 Hz.

    Details
    Doepfer A-147  VC LFO
    former retail price €71.43 (VAT excl.) No longer available!

Items 1 to 50 of 82 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Nur verfügbare anzeigen