Archive

Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

This digital module is specialized in one effect only: thick, juicy and fantastic chorus, thanks to automatic routing ieven in true stereo. It offers internal modulation, feedback and has two different chorus modes whose slightly different sound you might already know from the Audio Damage plug-ins Fluid and Dimensions.
The module's DSP works with proper 24Bit and 48kHz and also the mechanical quality is rock-solid.

Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

Besides true stereo wave shaping the digital Shapes module offers the possiblity to scan one of 16 interpolated wavetables using audio and CV inputs. To do this you can induct any input signal, from a sine oscillator to an entire stereo sum, whereupon the grade of erosion or destruction rises with the complexity of the audio material.

Kilpatrick´s K1600 is a duophonic MIDI/CV converter module. It converts your MIDI signals into control voltages, gates, triggers, gates

The K2579 module by Kilpatrick audio is a very complex two-part step sequencer  which can be controlled simultaneously by control voltages and MIDI data. It has a non-volatile memory for sequences and songs and allows for polyphonic or multitimbral use. Many parameters like playback direction gate length, step lenght etc can be controlled and enable rhythically interesting sequences.

You can expect the first synthesizer from Knas to be different and that is what it is: not your typical clean synth. The subrtactive architecture may look very familiar but the 2 VCOs (one is a subharmonic oscillator), the filter and the envelope have a certein twist. The synth has a duophonic ribbon controller, a semi-modular layout, a quantizer, pre-amp, a MIDI/CV interface and even USB.

The Richter Mega-Wave is a wavetable lookup module for processing and distorting signals by 8Bit wave tables. It contains wave forms of the original Wiard Mini-Wave.

The Malekko Wiard Boogie Filter is a lowpass filter and the offical licenced Version of the 1212A Wiard Module.
Just like the Borg the Boogie Filter also has an vactrol based cicuit. It has four different slope outputs: -6db, -12dB, -18dB and -24dB per octave.

Voltage controlled crossfade module with vactrol-based, voltage controlled level

Dual A/B switch module with a common gate switch input and a pushbutton for manual switching,

3U Eurorack module. module width 4HP

The XMIX module is versatile mixer module which you can use as a voltage controlled crossfader or a VCA.
The module is another cooperation between Malekko and Grant Richter from Wiard.

Inspired by VIznut's "Algorithmic symphonies from one line of code" and the BitWiz Audio Synth, the Equation Composer creates a wide range of gritty, 8-bit sounding melodies, waveforms, and noise. The module is organized into CV selectable "programs", where each program can act like a unique synthesizer.
Digital wavetable VCOs, chord generators, pattern generators, drum voices are included but you can load other programs into the module as well!

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

The p0 is a world class drum generator, which uses physical modeling to create sound. Specialties of the circuit are metallic instruments like hi-hats or cymbals. However, it is also possible to create bongos, toms and even kicks. Besides that, thanks to a clever parameter selection, the module can generate lots of extraordinary, partly psychedelic sounds. Control voltage inputs allow musicians to compose interesting rhythms with just one p0.

Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

The Braids is a digital macro-oscillator. It´s sound engine outclasses any VCO by far because the sounds are very complex and only two controls are used to affect several timbre parameters simultaneously. Braids is capable of different synthesis forms like FM, wavetable, vocal sound creation, analog emulation, noise, digital synthesis and even physical modeling. And it sounds awesome!

Quad generator for chiptune sounds. Each channel offers CV control of frequency, a FM CV-input and a gate input (note on /off). Additionally there are modulation options, a quantizer and a sequencer.