Items 1 to 50 of 77 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. Bastl Instruments - Noise Square

    Please order directly here: http://www.bastl-instruments.com

    The name is a nice pun referring to the capabilities of the module: "noise²" alias "squared noise" points to the two types of noise generators in the module: analog and digital. "Square" by itself refers to the square wave generation the module is capable of.
    All these signals are especially but not exclusively suitable as base for drum sounds.

    Details
    Bastl Instruments - Noise Square
    former retail price €91.60 (VAT excl.) No longer available!
  2. Erica Synths - Sequential Switch

    Erica's Sequential Switch module together with it's control interface is unique and it's features set it apart from others. Each of the eight channels can be turned on and off individually or be skipped, can output a gate and be merged with the adjacent channel to generate tied gates.
    The module makes it possible to create sound and clock sequences, to switch signals or to send one audio source to eight different destinations sequentially.

    Details
    Erica Synths - Sequential Switch
    former retail price €109.24 (VAT excl.) No longer available!
  3. Bastl Instruments - Quattro Figaro

    Please order directly here: http://www.bastl-instruments.com

    In this module four linear VCAs are combined in a smart way by using internal routings, inversions and mix outputs to form an easy-to-use voltage controlled mixer/panner module. Each channel might as well be used as a individual VCA or even as a voltage inverter.

    Details
    Bastl Instruments - Quattro Figaro
    former retail price €167.23 (VAT excl.) No longer available!
  4. Erica Synths - Fusion V1 tube heater power supply (220V)

    Small 6V AC power supply which must be installed if you want to use Erica Fusion V1tube modules. Advantage is that the tubes won't draw energy from your main Eurorack power supply when heating up.
    One Fusion V1 power supply can provide enough energy for the heaters of up to seven Fusion V1 tube modules.

    Details
    Synovatron ASm2Db-1-
    former retail price €25.21 (VAT excl.) No longer available!
  5. Audiothingies - CED tuner/suboctave

    Not available for an uncertain time.

    The CED module on one hand is used as an oscillator tuner with two different modes of operation and a LED chain for visualsation, on the other hand it can be a sub octave generator with adjustable octave. That's two modules in two HP only!

    Details
    Audiothingies - CED
    former retail price €83.19 (VAT excl.) No longer available!
  6. 4ms pedals - Atoner module

    One last unit in stock.

    A versatile module used for distorting and bit crushing audio, generating polyrhythmic CV clocks, extracting lower harmonics from audio and pitch shifting/jumping (downwards)

    Details
    4ms Atoner module
    former retail price €247.90 (VAT excl.) No longer available!
  7. Black Market Modular - Colour Palette

    This module is a small revolution as it integrates a modular idea from recording gear into Eurorck. It makes it possible to use up to three interchangeable saturation Colour circuit boards from the "Colour 500-Series Palette", an API 500 form factor device, into Eurorack. With voltage control of level, and with the prospective ColourCV boards even with voltage control of parameters!
    Well, it's a module with a modular idea behind it, interchangeable timbres like saturation of transformers, behaviour of vintage audio gear to effect simulation.

    Details
    Black Market Modular - Colour Palette
    former retail price €251.26 (VAT excl.) No longer available!
  8. Bastl Instruments - Tromsø

    Tromso contains three separately useable circuits: a voltage controlled triangle wave oscillator, a comparator and finally a sample & hold which can be used as a track & hold alternatively.
    So far it is a handy small tool but normalizations between the individual sections make it even more interesting because in this case the module is great for analog downsampling of audio signals i.e. as a sample rate reducer.

    Details
    Bastl Instruments - Tromsø
    former retail price €109.24 (VAT excl.) No longer available!
  9. 4ms SCM breakout DIY-kit

    All those people willing to DIY can build a breakout module for the 4ms Shuffling Clock Multiplier by themselves. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms SCM breakout DIY kit
    former retail price €108.40 (VAT excl.) No longer available!
  10. Mungo Enterprises - g0 Granular processor

    The g0 is a high-end granular processor, which can manipulate audio signals in various ways. Pitch, playback position and speed as well as the size of the audio window are individually adjustable. Raw material can be fed into the module in real-time or by SD card. No matter if you want to stretch audio material, chop it up rhythmically and rearrange it or just create wild grain chaos, this is the module for you.

    Details
    Audio Damage - Grainshift
    former retail price €503.36 (VAT excl.) No longer available!
  11. Synthrotek - DLY (Delay)

    Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
    Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

    Details
    Synthrotek Echo - front
    former retail price €113.45 (VAT excl.) No longer available!
  12. Audio Damage - Proton

    Although the Proton makes for a pretty nice delay its main focus of attention is a type of physical modeling called Karplus-Strong synthesis. It creates percussive sounds which resemple a plucked nylon strong but Proton is able to twist them in a strong way by filtering and by adding noise impulses.

    Details
    Audio Damage - DubJr
    former retail price €335.29 (VAT excl.) No longer available!
  13. Synthesis Technology - E340 Cloud Generator

    The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

    Details
    Synthesis Technology E340 Cloudgenerator--9-
    former retail price €315.13 (VAT excl.) No longer available!
  14. Erica Synths - duophonic MIDI/CV interface

    Precise duophonic MIDI/CV interface with 16Bit converters, directly adjustable Glide, a tune potentiometer and two FM/transpose inputs. The special feature is aparaphonic mode which exactly simulates the behaviour of an ARP Odyssey or a Formanta Polivoks exactly - it's a duophonic mode where a single gate is produced no matter which of the two keys is pressed.

    Details
    Analogue Solutions MT9  Midi to Trigger--9-
    former retail price €159.66 (VAT excl.) No longer available!
  15. Flame - 2013 Arpeggiator (incl. X2013 expander)

    Arpeggiator module containing two arpeggiator channels for bass and melody. Each arpeggiator´s pitch and clock (or gate) are available at individual outputs. The first four notes of the melody arpeggio (ARP) are output as chord at four dedicated CV outputs 1-4. With the miniature keyboard notes can be entered directly as cords or scales, The included expansion module X-2013 allows you to output the arpeggios via MIDI, to sync the module to MIDI clock and gives 8 clock outputs for sequencer tracks.

    Details
    Flame 2013 Arpeggiator + X-2013 Expander
    former retail price €315.13 (VAT excl.) No longer available!
  16. Indaboxx - boxer (6U suitcase, stained wood)

    The boxer is a transportable Eurorack suitcase-style enclosure made of stained wood. It offers two rows of 84HP width. Hand-made in Germany. No power solution included.

    Details
    Indaboxx - boxer (6U suitcase, stained wood)
    former retail price €205.88 (VAT excl.) No longer available!
  17. CG Products - XR22 VCO (MINIJACK)

    Will not be produced anymore. Only 3 in stock (as of 25.05.2016)

    Analog oscillator with a very own approach and that is two independent frequency control circuits beetween which the VCO can switch autonomously. This alters both the sound and frequency ratios, created glitches and new wave forms. An AM input is used, depending on a pot's setting, as a extra audio input or a the modulation signal for the awesome ringmodulator.
    Difficult to describe but very unique and interesting!

    Version with minijacks

    Details
    Christian Günther XR22 VCO (minijack)--front
    former retail price €222.69 (VAT excl.) No longer available!
  18. Bastl Instruments - Knit Rider

    Please order directly here: http://www.bastl-instruments.com

    Versatile six-track trigger/gate sequencer which offers up to 256 steps per pattern, yet remaining the fast and easy-to-use workflow of a classic 16-step sequencer. The solution is a smart partition into pattern, bar, step and sub-step as well as very useful functions like clear, copy/paste and undo.
    What else: mute per voice, clock generator, step repetition, saving everything on microSD card, record function.

    Details
    Bastl Instruments - Knit Rider
    former retail price €234.45 (VAT excl.) No longer available!
  19. Synthrotek - Echo

    Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

    Details
    Synthrotek Echo - front
    former retail price €92.44 (VAT excl.) No longer available!
  20. Bastl Instruments - Popcorn

    Please order directly here: http://www.bastl-instruments.com

    An unusual, because non-linear sequencer concept. The eight steps can be addressed in a number of ways: by several trigger signals which go one or more steps forward or backward, by using control voltages or even with three binary gates. A control voltage input is included as well, either transponsing the pitch quantized / non-quantized or or even to change the quantiser's scale from major to minor.

    Details
    Bastl Instruments - Knit Rider
    former retail price €213.45 (VAT excl.) No longer available!
  21. Erica Synths - Fusion Ringmod (v1)

    Not in production anymore.

    This is not the first tube ring modulator in Eurorack form factor but probably one of the smallest. It uses a 6ZP1 pentode tube which reacts quickly to CVs and clearly has a tubish sound without being too extreme. Use the module as a ring mod, as a VCA or just for adding some tube flavour to your audio.

    Details
    Pittsburgh Modular - Modulator RingMod--9-
    former retail price €172.27 (VAT excl.) No longer available!
  22. Audio Damage - DubJr Mk2

    Dub Junior's Mk2 version also is based in the delay algorithms used in the Audio Damage Plug In Dubstation and the old DubJr module but it has been clearly enhanced and improved regarding as well the features as the mechanical quality. It is a delay module with clock synchronization and tap-tempo, 24Bit/48kHz quality, two modes, two timpbres and external feedback loop. A worthy successor to the best-selling, venerable DubJr.

    Details
    Audio Damage - DubJr
    former retail price €276.47 (VAT excl.) No longer available!
  23. 4ms pedals - Noise Swash

    One last unit in stock

    The Noise Swash is a chaotic random noise-maker and CV generator, generating its own sounds or working as an audio processor. As a stand-alone device it generates unpredictable continuously morphing oscillations on the Audio Output jack, and random CV fluctuations out the dual-direction "Mood CV" jack.

    Details
    4ms Noise Swash module
    former retail price €302.52 (VAT excl.) No longer available!
  24. Mungo Enterprises - n0 Noise

    Describing the n0 as a noise generator is a complete understatement! Yes, it can do noise and this over a huuuuge frequency range but this module from Mungo's Zero series can be way more: a random generator, variable waveshaping oscillator, clock divider, tepmo-synchronized LFO, slew limiter, filter and a S&H or T&H! A swiss army knife of the digital kind.

    Details
    Doepfer A-118  Noise / Random--9-
    former retail price €419.33 (VAT excl.) No longer available!
  25. Mungo Enterprises - Zoom module

    All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

    Details
    Mungo Enterprises - Zoom module
    former retail price €27.73 (VAT excl.) No longer available!
  26. Sound Study Modular - MIDI 2 CV

    As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

    Details
    Synthrotek - MIDI to CV
    former retail price €75.63 (VAT excl.) No longer available!
  27. Patchkabel ? 6,3KMW ? 6,3KMW / 0,15m ? 6stk. ? PVC

    6 coloured unsymetric 1/4" mono jack patch cabels with 2 PVC angle plugs.

    Details
    Patchkabel - 6,3KMW - 6,3KMW / 0,15m - 6stk. - PVC--9-
    former retail price €6.72 (VAT excl.) No longer available!
  28. Erica Synths - Black Polivoks VCF

    Very authentic emulation of the voltage controlled low-/bandpass filter from the russian Formanta Polivoks synthesizer. Although the circuitry was adapted to modern modular systems and the low-end's behaviour was enhanced, the module's heart still are the original intedrated circuits K140UD12 responsible for the filter's special sound with it's wicked resonance.

    Details
    Manhattan Analog MA35 VCF/A--9-
    former retail price €159.66 (VAT excl.) No longer available!
  29. Synthwerks USB LED Lamp

    Gooseneck LED-lamp with white LEDs.

    Use it as a replacement for defective lamps on your Synthwerks Lamp-1 and Lamp-2 modules or just as a USB lamp for your laptop computer.

    Details
    Synthwerks USB LED Lamp
    former retail price €10.08 (VAT excl.) No longer available!
  30. Indaboxx - greyhound (3U Skiff, aluminium)

    Indaboxx' grexhound is a lightweight and yes sturdy 3U aluminium Skiff with real wood side panels. It offers one 84HP wide row Eurorack modules with a maximal depth of 50 mm. No power supply included.

    Details
    Indaboxx - greyhound
    former retail price €100.00 (VAT excl.) No longer available!
  31. Audio Damage - Æverb MK2

    The Æverb Mk2 is a digital reverb processor with extremely dense sound. Its results are rather unrealistic, yet very atmospheric. The user can choose between two reverb algorithms. All effect parameters feature CV inputs. Two audio inputs and outputs make the Æverb Mk2 a true stereo processor.

    Details
    Audio Damage - Æverb
    former retail price €276.47 (VAT excl.) No longer available!
  32. Bastl Instruments - Tea Kick

    Please order directly here: http://www.bastl-instruments.com

    Not another clone of a far-east TR bass drum, as one might think, but something entirely different: an electronic hobbyist's true vintage Eastern Bloc design from the times of the communist Chechoslovakia.
    It has voltage controllable tuning, adjustable resonance and click as well as a number of parallel audio outputs for a number of drum sounds. Pretty interesting and versatile drum voice with a wide frequency range which can be used as a weird oscillator as well.

    Details
    Bastl Instruments - Tea Kick
    former retail price €91.60 (VAT excl.) No longer available!
  33. Hackme Electronics - Vectr (silver front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!
  34. Audio Damage - Spectre

    Unlike 007 in Spectre it won't shoot people when you but it will freeze a frequenc spectrum when you use the trigger. Spectre by Audio Damage is a Fast Fourier Transformation (FFT) based effect module which captures the audio signal and is able to freeze its frequency spectrum. The frozen signal can be pitch shifted, spread in the stereo panorama and mixed with the original to create tuned drones, glitchy spheres, vocal sounds, trippy drums and much more.

    Details
    Audio Damage - Errorbox
    former retail price €268.07 (VAT excl.) No longer available!
  35. Plankton Electronics - The Earwig

    Discontinued. SALE of the very last unit (as long as stock lasts).

    The Earwig module is a recifying mixer or a mixing dual rectifier, up to you. It offers two channels with gain control, four ways of rectification, inversion and two offset controls; the channels can be used individually for processing CVs and audio signals but the additional mixing function gives you the sum and the difference of both channels.

    Details
    Erica Synths - Matrix Mixer front
    former retail price €176.47 (VAT excl.) No longer available!
  36. Audio Damage - Neuron

    Audio Damage brings you the Neuron a versatile digital drum voice, sounding good and being utterly flexible. The by-name "FM Drum Voice" is a slight understatement because besides FM sounds the module can do pretty much everything from the electro drum kit: filtered noise makes snare drums possible, a wide frequency range allows for kicks, toms and more, FM provides you with anythind metallic, cymbals and effect sounds. A 2-in-1 distortion and a pitch envelope is abord, too.

    Details
    Audio Damage - Errorbox
    former retail price €335.29 (VAT excl.) No longer available!
  37. 4ms Auto Bass Generator BLANK PCB

    Blank PCB for building an Autonomous Bassline Generator. Components or a build description are not included, just the circuit board.

    Details
    4ms Auto Bass Generator BLANK PCB
    former retail price €10.08 (VAT excl.) No longer available!
  38. Erica Synths - D-Tech VCF

    Versatile clone of the russian Polyvoks synthesizer's filter with some fancy extras. The resonance is voltage controllable, both the filter slope of the lowpass respective the bandpass width is adjustable with a potentiometer as is the resonance behaviour. With these functions the D-Tech filter can produce both smooth, ballsy sound but also Polyvoks resonant screams, so typical for the Polivoks. Have it your way. And the module is really adequate for creating very wonderful, wooden drum sounds by "pinging" the filter.

    Details
    Manhattan Analog MA35 VCF/A--9-
    former retail price €180.67 (VAT excl.) No longer available!
  39. Bastl Instruments - Dynamo

    please order directly here: http://www.bastl-instruments.com/

    Really odd and unconventional module combining and intertwining an envelope follower, a rectifier, a comparator and a voltage controllable switch.
    You may ask: What for? Well, for extracting gates from an audio signal. For generating a compressor curve CV which turns any better VCA into a flexible compressor. Or for creating a "fake" Thru-Zero modulation!
    The individual sections can be used separately of course.

    Details
    Bastl Instruments - Dynamo
    former retail price €109.24 (VAT excl.) No longer available!
  40. 4ms Shuffling Clock Multiplier DIY KIT

    DIYers can build a 4ms Shuffling Clock Multiplier with this kit. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms Shuffling Clock Multiplier  DIY kit
    former retail price €92.44 (VAT excl.) No longer available!
  41. Mungo Enterprises - v0 Vocoder

    The v0 is a spectral processor which can be used as a vocoder or bandpass filter. Features like an envelope respectively envelope follower, its freeze function and several control voltage inputs turn this module into a powerful tool for sound design.

    Details
    Doepfer A-128  Fixed Filterbank
    former retail price €503.36 (VAT excl.) No longer available!
  42. Synthrotek - Noise Filtering Distribution Board

    This passive bus board's main feature are the noise filtering capacitors located at three locations of the board. They reduce noise and bleedthru between modules and provide for clean signals. 17 connectors for modules are more than competitors' busboards offer.

    Details
    Doepfer A-100 Busplatine
    former retail price €46.22 (VAT excl.) No longer available!
  43. Audio Damage - Boomtschak

    Boomtschak - one of the most powerful entirely analog drum voices in Eurorack. As sound sources it uses an oscillator with waveshaper, a filtered noise or the mix of both. Not less than three flexible envelope generators are included, for pitch bending and the amplifiers. The resonant multi-mode filter can be fed with external audio signals instead the noise generator. The module's frequency range is huge, thus allowing for using it as a synthesizer voice.

    Details
    Audio Damage - DubJr
    former retail price €478.15 (VAT excl.) No longer available!
  44. Synthesis Technology - E350 Morphing Terrarium

    Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

    Details
    Synthesis Technology E350 Morphing Terrarium--9-
    former retail price €335.29 (VAT excl.) No longer available!
  45. Vermona - dual buffered multiple/inverter (1U module)

    This 1U module by Vermona is equipped with two active i.e. buffered multiples which offer inversion as well. The left set of multiples has also an offset input, e.g. for transpositions.

    Details
    ERM Midiclock+
    former retail price €116.81 (VAT excl.) No longer available!
  46. Audio Damage - Errorbox

    The Errorbox module uses three digital distortion techniques to mangle your signals: sample rate reduction, bit rate reduction and an unique Error effect. The results range from slight vintage digital flavour to total destruction

    Details
    Audio Damage - Errorbox
    former retail price €175.63 (VAT excl.) No longer available!
  47. Bastl Instruments - grandPA

    Please order directly here: http://www.bastl-instruments.com

    Grampa, grampa, will you please play me a story from my granular sample player? All 35 which are on the microSD?
    The grandPA module offers 12Bit, sample rate up to 44.1kHz, direct playback of two samples, distortion, then adjustable start- and end-points, gran size and more. All that fun on 5HP only and for small money.

    Details
    Bastl Instruments - grandPA
    former retail price €175.63 (VAT excl.) No longer available!
  48. Qu-Bit Electronix - RT60

    Stereo multi effects processor with seven DSP effects and voltage control of all parameters.

    Details
    Flame FX6 Eurorack module
    former retail price €155.46 (VAT excl.) No longer available!
  49. Bastl Instruments - Little Nerd

    Bastl call it to the point a "trigger toolie", to be exact this module is a multi-channel processor for clocks, triggers and gates. It has two sections which can be coupled or used individually. In total there are five outputs processing input signals in a different way: by clock delay, clock division or clock multiplication, trigger repetition but also in form of a euclidian sequencer, a probability based groove generator and finally a clock oscillator.

    Details
    Bastl Instruments - Little Nerd
    former retail price €125.21 (VAT excl.) No longer available!
  50. Hackme Electronics - Vectr (black front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!

Items 1 to 50 of 77 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction