Archive

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Unlike other compressor modules on the market this one is #1 stereo and #2 DSP-based. It can be used as a mono compressor, as stereo compressor or in a side chain mode. This module's code is known from some Audio Damage plug-ins like the Rough Rider, Kombinat Diva and more and is now available as hardware.

Der cvWS is a dualer wave shaper like the one found in the core of the uLFO. The upper unit creates a sawtooth out of sruare and triangle wave, the lower unit makes sine waves. Sounds boring? Then try to FM-modulate it for interesting effects!

This LFO packed with features bases on a "triangle core" VCO and thus is on a par with any full-fledged analog VCO because the 1V/oct input allows for using it as a normal VCO. The tracking ranges a few octaves which is far from bad. There are six different waveform outputs: ramp, pulse, sine, triangle, saw, square and sine shape. All this makes the uLFO one of the most versatile LFOs no the market.

Self-oscillating 2pole state variable filter, 12dB highpass, lowpass and notch, 6dB bandpass, extra control for notch balance

Bubblesound´s VCOb is a really good, rich sounding, stable yet compact fully analog VCO. It´s circuitry is based on the uLFO but with some improvements. It tracks well 4-6 octaves (depending on how picky you are) which is good.

Discontinued

The V'Amp is a combined voltage-controlled amplifier (VCA) and ring modulator. While typical ring mod devices are designed specifically for frequency mixing, the V'Amp allows you to not only change the degree of the mixing and the level of the bleed through, but can also be used as a VCA at the same time. The mixing can be varied from VCA (carrier only), into ring mod, then out of ring mod into inverting VCA (inverted carrier).

No longer available in beech!

Portable and foldable Eurorack case with three rows á 126 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling.
The UNO 126 contains the SILTA power supply solution with 3.75 Ampere, the SEI trunk line module and is supplied with a padded soft bag.

No longer available in beech wood

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

One last unit in stock.

Creative eight step pulse sequencer with random and one-shot modes and adjustable loop cycle length, number of repeats and step length. The module can be coupled with other Algorhythms to create longer patterns or to cross-influence the sequencers which can be interesting for polyrhythmics or odd time signatures.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

External 9V DC power supply, BOSS-style. Can be used with all Koma Elektronik products. Polarity is like those of guitar effects pedals: center negative, ring positive.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The BD101 by KOMA Elektronik is a very special analog delay which differs completely from conventional analog delay pedals, soundwise but also featurewise. It allows for sick, chopped sounds that can resemble a bit crusher. You can easily and quickly blend from thick, long delays to extremely short pulses.
Inputs and outputs for control voltages make it possible to combine the BD101 with other (KOMA-) pedals but of course also with a modular synthesizer! An infrared motion sensor allows for gestical control of parameters.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The FT-201 by KOMA Elektronik is an unique, innovative filter stompbox effect with an internal 10-step sequencer. In addition it can be controlled by an infrared motion sensor and thus be played gestically!

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The medium sized Kabelhänger kills two birds with one stone :
Another 2HP gap in your system is filled and your, now well-organized, cables hang around like a relaxed sloth.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Kommander by KOMA Elektronik is a dual X/Y infrared motion controller for your modular system. Simply connect it to CV and gate inputs, move your hand (foot or what have you) above it and generate modulations by gestures.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

Powerful step sequencer built around four really properly well-equipped full-featured 16-step sequencers communicating via both MIDI and CV/Gate. There are no screens or submenus - all features have their own dedicated controls and have their own dedicated in- and outputs on the large 87-point patch bay. Lastly a seven bank CV Recorder is on board and can output up to 5 banks at once!
The Komplex Sequencer opens up a whole new world of creative possibilities and starts where other sequencers have stopped, for instance when it comes to crossmodulations or patching the sequencers crosswise. Very experimental and not only fine in the studio but also on stage.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Poltergeist, being an entirely voltage controllable quadrophonix mixer is a very extraordinary and unique module you can mix and control signals quadraphonically with complete control and beyond. Four channels each with it’s own VCA, plus a stereo auxiliary input, are mixed out to four separate outputs enabling the user to manipulate signals both stereophonically and quadraphonically in entirely new and ghostly ways.
With not less than 48 analog SSM-VCAs it's a very laborious module KOMA needed a lot of brain juice and patience for.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The RH-301 synchronises analog clock, MIDI clock and DIN Sync by a tap- and sync-able tempo generator with additional syncable LFO and an envelope generator. A great master clock synchronizer mega utility unit and the first of it´s kind!

Please order directly with KOMA Elektronik https://koma-elektronik.com/

State variable multi-mode filter with optical components (vactrols) that provide for a good sound. Three filter types are available and you can blend between them. Voltage control of cutoff, resonance and mix.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

Sherman preist dieses außergewöhnliche Analogfilter primär bei DJs an, sicher werden hier auch zahlreiche Produzenten und Liveacts fündig: Die Eingangsstufe bringt das eingehende Signal gut auf Pegel und lässt auch heftigste Distortion zu! Der Effekt lässt sich mit dem Mix-Regler weich einblenden oder mit dem großzügigen Transform-Taster abrupt einschalten. Jedes Frequenzband (LP, BP, HP) lässt sich anteilig zum Originalsignal zumischen und mit positiver wie auch negativer Amplitudenmodulation einstellen. Zudem kann die Flankensteilheit jedes Bandes zwischen 12 und 24 dB umgeschaltet werden. Der Mastercutoff (blau) arbeitet mit den drei AM Reglern zusammen, wobei der Slavecutoff (grün) mit dem FM-Regler am besten funktioniert. Unterhalb jeden Bandes finden sich je 2 LEDs. Je nach angezeigter Farbe (blau oder grün) wirkt der Master- oder Slavecutoff am effektivsten! Die drei weißen Potis beeinflussen das Groove-Verhältnis des Filters. Auf diese Weise kann man mal eben den kompletten Groove in-sync mit dem Restyler zerfräsen und es macht grossen Spass. -Der Klang ist schön warm und fett und bietet in seinem Dynamikumfang ein ungeahntes Spektrum. Man darf gespannt sein, wie viele Clubanlagen unter der Herrschaft des RESTYLERS demnächst ihr Ende finden werden…

Monophonic analog synthesizer with flexible sound generation (2 VCOs, cross modulation, noise, ringmod) as well as overdrive and feedback. Loopable envelopes and a MIDI-syncable LFO are there for modulation duties. Patch sockets for contol voltages enable interfacing e.g. with a modular synth.

The synth is capable of many sounds, from mighty leadsm thick basses, crazy FM sounds to cutting sync sounds.
The version 4075 is equipped with a really good sounding ARP 2600 lowpass filter.

Monophonic analog synthesizer with flexible sound generation (2 VCOs, cross modulation, noise, ringmod) as well as overdrive and feedback. Loopable envelopes and a MIDI-syncable LFO are there for modulation duties. Patch sockets for contol voltages enable interfacing e.g. with a modular synth.

The synth is capable of many sounds, from mighty leadsm thick basses, crazy FM sounds to cutting sync sounds. The version 5089 has a Moog low pass filter.

The two voice variation of the Code by Studio Electronics is an affordable entry into the world of polyphonic analog sounds. It can be extended with more filtercards later and can also be upgraded with more voices up to an eight voice version.

The two voices will generate huge basslines, leads and massive unisono sounds.