Archive

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Unlike other compressor modules on the market this one is #1 stereo and #2 DSP-based. It can be used as a mono compressor, as stereo compressor or in a side chain mode. This module's code is known from some Audio Damage plug-ins like the Rough Rider, Kombinat Diva and more and is now available as hardware.

The expansion module for the ADSRjr by Circuit Abbey adds serveral features to the main module: voltage control of envlope segment times, directly switchable curve characteristics and additional outputs.

A pre-amplifier module specially designed for the use with guitars. It comes with a three-band equalizer and can be used both with active or passive guitars. The sound is transparent but it can clip nicely.

Flexible clock divider with eight outputs and eight different modes like binary counting, divide by odd factors, by prime numbers, random modes and so on. It can output either triggers or gates.

Circuit Abbey Gozinta gives you two separate adjustable preamplifier units to boost the level of any line signal to modular level. The thing sounds clean because of the use of high quality, clean and supermodern amplifier ICs.

The Gravity Well is an unusual Eurorack module that asymetrically warps signals. This happens on several axis with different strengths. Imagine the input signal being an object circulating around a heavenly body. CVs can change the circular path by altering the body´s strength of gravity, vayring the gravity field and affecting the north-south and the east-west magnitudes.

The Impulse Drive module is a very unique wave shaper as it generates harmonically complex sounds by crossfading between signals, triple pulsewave generation and by cross modulation.

Mix expander module initially developed as expander for the G8 by Circuit Abbey. But it works also with Livewire's Chaos Computer and with the QPLFO by 4ms. The Intermix mixes the outputs of the mentioned modules either as a eicht-channel mixer or as a dual four-channel mixer and in addition it has a min/max function.

Single unit

Invy is a dual voltage procressor for attenuating and inverting signals and for creating offset voltages. Normalizing and mixing features allow for a number of applications.

The TripFire Eurorack module by Circuit Abbey is a very handy, compact dual module. The top unit is a comparator for extracting gates from external signals, the bottom unit is a gate- or trigger-delay and thus the module is excellent for creating rhythmical signals, trigger envelopes etc.

Two clean ring modulators in just two HP? Skinny Twiggy makes it possible!

UNIFY is a high quality, four channel Stereo mixer module with selectable output level, panorama pots per channel and a headphone output with separate level control. It´s very well suited as the final mixer in your Eurorack system.

The Unify input expander adds four input channels to the Circuit Abbey Unify module. Up to three expanders can be connected to one Unify which gives a maximum of 16 input channels

VacVac contains two VCA circuits working with Vactrols. Those who like to have the oganic percussive behaviour of a lopass gate in a true VCA, but search for something smaller and simpler than an Optomix might like this module.

New Cycleboxes will be abvailable early May 2012!

The Cyclebox by Cylonix is a digital wavetable VCO. To be exact it is a dual oscillator with additional sub-oscillator and an extreme frequency range off 22 octaves (!). Besides that there are quadrature outputs, voltage controllable wavesahping and much more. Milions of sounds in one module!

This small expander module for the Cyclebox V2 by Cylonix is manufactured by Intellijel and gives you direct access to some hidden extra functions integrated in the Cyclebox V2. Eight switches allow you for activating different modes like the LFO mode or Mega-Mode-Spread etc.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

External 9V DC power supply, BOSS-style. Can be used with all Koma Elektronik products. Polarity is like those of guitar effects pedals: center negative, ring positive.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The BD101 by KOMA Elektronik is a very special analog delay which differs completely from conventional analog delay pedals, soundwise but also featurewise. It allows for sick, chopped sounds that can resemble a bit crusher. You can easily and quickly blend from thick, long delays to extremely short pulses.
Inputs and outputs for control voltages make it possible to combine the BD101 with other (KOMA-) pedals but of course also with a modular synthesizer! An infrared motion sensor allows for gestical control of parameters.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The FT-201 by KOMA Elektronik is an unique, innovative filter stompbox effect with an internal 10-step sequencer. In addition it can be controlled by an infrared motion sensor and thus be played gestically!

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The medium sized Kabelhänger kills two birds with one stone :
Another 2HP gap in your system is filled and your, now well-organized, cables hang around like a relaxed sloth.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Kommander by KOMA Elektronik is a dual X/Y infrared motion controller for your modular system. Simply connect it to CV and gate inputs, move your hand (foot or what have you) above it and generate modulations by gestures.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

Powerful step sequencer built around four really properly well-equipped full-featured 16-step sequencers communicating via both MIDI and CV/Gate. There are no screens or submenus - all features have their own dedicated controls and have their own dedicated in- and outputs on the large 87-point patch bay. Lastly a seven bank CV Recorder is on board and can output up to 5 banks at once!
The Komplex Sequencer opens up a whole new world of creative possibilities and starts where other sequencers have stopped, for instance when it comes to crossmodulations or patching the sequencers crosswise. Very experimental and not only fine in the studio but also on stage.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Poltergeist, being an entirely voltage controllable quadrophonix mixer is a very extraordinary and unique module you can mix and control signals quadraphonically with complete control and beyond. Four channels each with it’s own VCA, plus a stereo auxiliary input, are mixed out to four separate outputs enabling the user to manipulate signals both stereophonically and quadraphonically in entirely new and ghostly ways.
With not less than 48 analog SSM-VCAs it's a very laborious module KOMA needed a lot of brain juice and patience for.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The RH-301 synchronises analog clock, MIDI clock and DIN Sync by a tap- and sync-able tempo generator with additional syncable LFO and an envelope generator. A great master clock synchronizer mega utility unit and the first of it´s kind!

Please order directly with KOMA Elektronik https://koma-elektronik.com/

State variable multi-mode filter with optical components (vactrols) that provide for a good sound. Three filter types are available and you can blend between them. Voltage control of cutoff, resonance and mix.

The Analog Memory is an expansion module for the Pressure Points. It adds five more rows of each four steps of CVs to the Pressure Point.

The DIN Power is a simple and inexpensive solution for distributing power in an external case for eurorack modules.
It uses the power distribution systems of an already existing modular system and sends it to an external case. It is very suitable for building a flat controller case with modules like René, Pressure Points, joystick modules and other haptical controllers.

The Format Jumbler is an adaptor module which converts between 3,5mm (1/8")jacks, 6.3mm (1/4") jacks and banana plugs. Additionally you can use the module as a multiples.

Vactrol multimode filter, based on the core of the discoontinued QMMG. It masters a number of sounds, from resonant acid squelch to percussive lowpass-gate sounds like Buchla bongos you an create simultaneously.

Entire modular system with nine modules from Make Noise. It integrates sound generators, lopass gates, effects, modulation generatros, a haptic controller and a sequencer.
The unique CV-Bus is designed for convenient distribution of CV signals and adds a pre-amp plus stereo output section.
The Shared System can be expanded by further modules as 48HP are non-occupied.

Digital replica of the legendary Mellotron, not as a VST-plugin but as a real hardware instrument with a keyboard!

Features and looks resemble the original. Three sounds are available at the same time and it is possible to blend between them with a control.

Pitch- Volume and tone-control plus the ominous "half speed" switch.

Loading sounds from internal CR-Rom drive or from  the card reader slot. Length of samples is limited to eight seconds of course.

Version with anthracite colored housing.

The rackversion of the Memotron now offers the double amount of sounds available simultaneously. You can call the Memotron from Berlin-based manufacturer Manikin Electronics roughly a digital Mellotron. Unlike a VST instrument this is real hardware, so it is perfect for people who want to play Mellotron sounds on stage without the use of a PC or a sensitive original unit.
A comprehensive sample library with high-quality sounds of various Mellotrons from the 60ies and the 70ies lets revive the sound of bands like King Crimson, the Beatles, Procol Harum and other important artists of this era.

It's now part of the Basic Collection.

The Studio collection is a sample library for the Manikin Memotron. It is destined for all those who want to use the classic sounds of the Mellotron but without annoying side-effects like grinding mechanics, worn out and noisy tapes. ll samples have been treated and cleaned and represent an "ideal" flawless Mellotron.

sustain pedal

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.