Archive

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Unlike other compressor modules on the market this one is #1 stereo and #2 DSP-based. It can be used as a mono compressor, as stereo compressor or in a side chain mode. This module's code is known from some Audio Damage plug-ins like the Rough Rider, Kombinat Diva and more and is now available as hardware.

The expansion module for the ADSRjr by Circuit Abbey adds serveral features to the main module: voltage control of envlope segment times, directly switchable curve characteristics and additional outputs.

A pre-amplifier module specially designed for the use with guitars. It comes with a three-band equalizer and can be used both with active or passive guitars. The sound is transparent but it can clip nicely.

Flexible clock divider with eight outputs and eight different modes like binary counting, divide by odd factors, by prime numbers, random modes and so on. It can output either triggers or gates.

Circuit Abbey Gozinta gives you two separate adjustable preamplifier units to boost the level of any line signal to modular level. The thing sounds clean because of the use of high quality, clean and supermodern amplifier ICs.

The Gravity Well is an unusual Eurorack module that asymetrically warps signals. This happens on several axis with different strengths. Imagine the input signal being an object circulating around a heavenly body. CVs can change the circular path by altering the body´s strength of gravity, vayring the gravity field and affecting the north-south and the east-west magnitudes.

The Impulse Drive module is a very unique wave shaper as it generates harmonically complex sounds by crossfading between signals, triple pulsewave generation and by cross modulation.

Mix expander module initially developed as expander for the G8 by Circuit Abbey. But it works also with Livewire's Chaos Computer and with the QPLFO by 4ms. The Intermix mixes the outputs of the mentioned modules either as a eicht-channel mixer or as a dual four-channel mixer and in addition it has a min/max function.

Single unit

Invy is a dual voltage procressor for attenuating and inverting signals and for creating offset voltages. Normalizing and mixing features allow for a number of applications.

The TripFire Eurorack module by Circuit Abbey is a very handy, compact dual module. The top unit is a comparator for extracting gates from external signals, the bottom unit is a gate- or trigger-delay and thus the module is excellent for creating rhythmical signals, trigger envelopes etc.

Two clean ring modulators in just two HP? Skinny Twiggy makes it possible!

UNIFY is a high quality, four channel Stereo mixer module with selectable output level, panorama pots per channel and a headphone output with separate level control. It´s very well suited as the final mixer in your Eurorack system.

The Unify input expander adds four input channels to the Circuit Abbey Unify module. Up to three expanders can be connected to one Unify which gives a maximum of 16 input channels

VacVac contains two VCA circuits working with Vactrols. Those who like to have the oganic percussive behaviour of a lopass gate in a true VCA, but search for something smaller and simpler than an Optomix might like this module.

A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

Item for use and in combination with EoBody2 interface.

A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

artikel for use and in combination with the WIRELESS EoBody interface.

The EoWave Domino is a compact monophonic analog synthesizer with discrete circuitry for an affordable price.

Highlights are the eight-step sequencer and the arpeggiator.

EoMono, the little brother of the EoBody2 is the first USB plugandplay sensor interface of this kind. It gives  you connection for one sensor. This way you can start with sensor applications easily and for a small price. Just control your software´s parameter assigned by yourself with a desired sensor.

Eowave Eomono is compatible with all MIDI softwares! No additional MIDI interface is needed.

The last unit for a super low special price!

The MAGMA, which was called Koma in its prototype stadium, is an analog bassline synthesizer with integrated sequencers, memory and a Roland type low pass filter.

A movement tilt switch. This movement sensor will not detect accelerations but x,y position.

artikel for use and in combination with EoBody2 interface.

This 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters. These 10 cm ribbon are also perfect to emulate faders. artikel for use and in combination with EoBody2 interface.

The EoWave Ribbon is not only a ribbon controller but also a standalone instrument. It contains a digital LoFi-synth with one VCO and frequency modulation.
Besides of that the unit can be used as a controller both for USB-MIDI and control voltages!

This sensor is a shock-sensitive pad, a piezo. Ideal for drums and percussive sensoring. Unit for use and in combination with EoBody2 interface.

50% discount on all remaining EoWave sensors, only as stock lasts (read: as long as delivery status is "immediately available")

A momentary touch switch (temporary, reacting to "on" as long as you press the button) compatible with eobody1 and eobody2 USB8 SensorBox.

artikel for use and in combination with EoBody2 interface.

A temperature sensor reacting on changes of cold and warm compatible with all eobody converters. artikel for use and in combination with EoBody2 interface.

This desktop unit is a clone of the wild and nasty filter circuit from the vintage russian Polivoks synthesizer. It is built with genuine russian ICs and the sound circuit is 100% analog.
What makes the Acidbox really briliant is the mighty versatile LFO with synchronisation, tap tempo, plenty of wave forms, waveshaping and tempo multiplication/division. This totally invites you to jam with the unit instantly! Hot stuff!

Discontinued

The V'Amp is a combined voltage-controlled amplifier (VCA) and ring modulator. While typical ring mod devices are designed specifically for frequency mixing, the V'Amp allows you to not only change the degree of the mixing and the level of the bleed through, but can also be used as a VCA at the same time. The mixing can be varied from VCA (carrier only), into ring mod, then out of ring mod into inverting VCA (inverted carrier).

No longer available in beech!

Portable and foldable Eurorack case with three rows á 126 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling.
The UNO 126 contains the SILTA power supply solution with 3.75 Ampere, the SEI trunk line module and is supplied with a padded soft bag.

No longer available in beech wood

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.