Items 1 to 50 of 89 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Nur verfügbare anzeigen
  1. Vermona - dual buffered multiple/inverter (1U module)

    This 1U module by Vermona is equipped with two active i.e. buffered multiples which offer inversion as well. The left set of multiples has also an offset input, e.g. for transpositions.

    Details
    ERM Midiclock+
    former retail price €116.81 (VAT excl.) No longer available!
  2. Synthwerks USB LED Lamp

    Gooseneck LED-lamp with white LEDs.

    Use it as a replacement for defective lamps on your Synthwerks Lamp-1 and Lamp-2 modules or just as a USB lamp for your laptop computer.

    Details
    Synthwerks USB LED Lamp
    former retail price €10.08 (VAT excl.) No longer available!
  3. Synthrotek - Deluxe Power BRICK (6A, 90W)

    Powerful external "laptop style" power supply which is perfectly suited for Synthrotek's Deluxe Power module, providing 90W, which corresponds to 1.6 Amperes of power.

    Details
    4ms Row Power - Power Brick 90W
    former retail price €25.21 (VAT excl.) No longer available!
  4. Simple Circuits - APC Pro

    This Atari Punk Console Pro is based on a classic APC circuitry, consisting of an instable square wave oscillator which controls a monostable oscillator, producing a pulse wave.
    The module is voltage controllable and guarantees wonderful low-fidelity, old school Atari sounds.

    Details
    Simple Circuits - APC Pro
    former retail price €100.00 (VAT excl.) No longer available!
  5. Sherman Rodec Restyler

    Sherman preist dieses außergewöhnliche Analogfilter primär bei DJs an, sicher werden hier auch zahlreiche Produzenten und Liveacts fündig: Die Eingangsstufe bringt das eingehende Signal gut auf Pegel und lässt auch heftigste Distortion zu! Der Effekt lässt sich mit dem Mix-Regler weich einblenden oder mit dem großzügigen Transform-Taster abrupt einschalten. Jedes Frequenzband (LP, BP, HP) lässt sich anteilig zum Originalsignal zumischen und mit positiver wie auch negativer Amplitudenmodulation einstellen. Zudem kann die Flankensteilheit jedes Bandes zwischen 12 und 24 dB umgeschaltet werden. Der Mastercutoff (blau) arbeitet mit den drei AM Reglern zusammen, wobei der Slavecutoff (grün) mit dem FM-Regler am besten funktioniert. Unterhalb jeden Bandes finden sich je 2 LEDs. Je nach angezeigter Farbe (blau oder grün) wirkt der Master- oder Slavecutoff am effektivsten! Die drei weißen Potis beeinflussen das Groove-Verhältnis des Filters. Auf diese Weise kann man mal eben den kompletten Groove in-sync mit dem Restyler zerfräsen und es macht grossen Spass. -Der Klang ist schön warm und fett und bietet in seinem Dynamikumfang ein ungeahntes Spektrum. Man darf gespannt sein, wie viele Clubanlagen unter der Herrschaft des RESTYLERS demnächst ihr Ende finden werden…

    Details
    Sherman Restyler--9-
    former retail price €419.33 (VAT excl.) No longer available!
  6. Qu-Bit Electronix Nano Rand (silver)

    Small, multi-functional and in first line musical random module with four selectable random algorithms, sample & hold, noise and random gates The Nano Rand can be clocked either internally or externally.

    Details
    Doepfer A-118  Noise / Random--9-
    former retail price €158.82 (VAT excl.) No longer available!
  7. Qu-Bit Electronix - RT60

    Stereo multi effects processor with seven DSP effects and voltage control of all parameters.

    Details
    Flame FX6 Eurorack module
    former retail price €155.46 (VAT excl.) No longer available!
  8. Plankton Electronics - The Earwig

    Discontinued. SALE of the very last unit (as long as stock lasts).

    The Earwig module is a recifying mixer or a mixing dual rectifier, up to you. It offers two channels with gain control, four ways of rectification, inversion and two offset controls; the channels can be used individually for processing CVs and audio signals but the additional mixing function gives you the sum and the difference of both channels.

    Details
    Erica Synths - Matrix Mixer front
    former retail price €176.47 (VAT excl.) No longer available!
  9. Patchkabel ? 6,3KMW ? 6,3KMW / 0,15m ? 6stk. ? PVC

    6 coloured unsymetric 1/4" mono jack patch cabels with 2 PVC angle plugs.

    Details
    Patchkabel - 6,3KMW - 6,3KMW / 0,15m - 6stk. - PVC--9-
    former retail price €6.72 (VAT excl.) No longer available!
  10. Orthogonal Devices - ER-101 (Nostalgia)

    We will not be getting this unit anymore because OD has stopped reselling to dealers. Please buy directly.

    Unique and pretty complex digtal real-time sequencer with four tracks and memory. It makes it possible to compose sequences with thousands of steps with variable duration, variable gate length, arbitrary scales. Smooth tempo-matched transitions; mathematical functions per step; copy/paste; note repeat (ratchet) and shuffle per step. New firmware can be easily loaded via USB and the module can be expanded.

    Nostalgia version with white print on dark grey powder coated faceplate.

    Details
    Make Noise René--9-
    former retail price €604.20 (VAT excl.) No longer available!
  11. Mungo Enterprises - v0 Vocoder

    The v0 is a spectral processor which can be used as a vocoder or bandpass filter. Features like an envelope respectively envelope follower, its freeze function and several control voltage inputs turn this module into a powerful tool for sound design.

    Details
    Doepfer A-128  Fixed Filterbank
    former retail price €503.36 (VAT excl.) No longer available!
  12. Mungo Enterprises - r0 Reverb

    While many reverb modules have only "size" and "feedback" parameters and sometimes include a filter, the r0 uses a more complex and pretty unique approach. It models a room with adjustable size, width and decay time in which you can position the object separately from the pick-up/microphone. Pretty much like in a echo chamber, only with the difference that you can create extreme and unnatural rooms with the r0.

    Details
    CG Products - Delay1022 Mk2
    former retail price €503.36 (VAT excl.) No longer available!
  13. Mungo Enterprises - n0 Noise

    Describing the n0 as a noise generator is a complete understatement! Yes, it can do noise and this over a huuuuge frequency range but this module from Mungo's Zero series can be way more: a random generator, variable waveshaping oscillator, clock divider, tepmo-synchronized LFO, slew limiter, filter and a S&H or T&H! A swiss army knife of the digital kind.

    Details
    Doepfer A-118  Noise / Random--9-
    former retail price €419.33 (VAT excl.) No longer available!
  14. Mungo Enterprises - g0 Granular processor

    The g0 is a high-end granular processor, which can manipulate audio signals in various ways. Pitch, playback position and speed as well as the size of the audio window are individually adjustable. Raw material can be fed into the module in real-time or by SD card. No matter if you want to stretch audio material, chop it up rhythmically and rearrange it or just create wild grain chaos, this is the module for you.

    Details
    Audio Damage - Grainshift
    former retail price €503.36 (VAT excl.) No longer available!
  15. Mungo Enterprises - d0 Delay

    Voltage controlled two-channel digital delay module with delay times of .2mS to 2S. It tracks 1V/octave CVs, pitch and even offer clock synchronisation. For tuned feedbacks an autotune function is available.

    Details
    CG Products - Delay1022 Mk2
    former retail price €503.36 (VAT excl.) No longer available!
  16. MUC-400 Eurorack MIDI/CV Interface

    Universal, freely programmable MIDI/CV converter with eight channels and 16Bit conversion. It features v/oct, Hz/V, S-Trig, polyphonie, all 128 MIDI controllers, velocity, channel pressure, poly pressure, clock, trig and sync and much more. 16 outputs, eight of which can provide control voltages. Simultaneous use of 16 MIDI channels is great for polyphonic applications. 4 presets can be saved.

    Details
    Doepfer A-190-1  Midi/CV-interface
    former retail price €276.47 (VAT excl.) No longer available!
  17. Monorocket Skiff - Ford Black

    not in our product range anymore

    The flat S3 104m case is the successor of the old Skiff. It´s pretty much the same product but now it has 104 HP space for modules. Here in our online shop it is exclusively available in the "Ford Black" color option.

    The skiff doesn´t contain a power supply - it has an inttegrated DIN-Power by Make Noise that gets it´s power from your main modular system. Please allow for additional 4HP in your main system as that´s the space the master power module needs. The receiving slave is integrated in the S3 104m case.

    Details
    Monorocket S3 104m Skiff Ford Black--9-
    former retail price €231.09 (VAT excl.) No longer available!
  18. Midisolutions pedal-to-midi-converter

    To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

    Details
    MIDI Solutions Pedal Controller--9-
    former retail price €125.21 (VAT excl.) No longer available!
  19. Midisolutions Eventprocessor / plus

    phase out model. Sales only as long as stock lasts.

    The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

    Details
    MIDI Solutions Event Processor Plus--9-
    former retail price €158.82 (VAT excl.) No longer available!
  20. Midisolutions Breathcontroller

    The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

    Attention: Yamaha doesn´t manufacture the breath controllers anymore!

    Details
    MIDI Solutions Breath Controller--9-
    former retail price €167.23 (VAT excl.) No longer available!
  21. MIDI Solutions Velocity Converter

    Phase-out model. Sales only as long as stock lasts

    This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

    Details
    MIDI Solutions Velocity Converter--9-
    former retail price €125.21 (VAT excl.) No longer available!
  22. MIDI Solutions Thru

    If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

    Details
    MIDI Solutions Thru--9-
    former retail price €41.18 (VAT excl.) No longer available!
  23. MIDI Solutions T8

    If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

    Details
    MIDI Solutions T8--9-
    former retail price €167.23 (VAT excl.) No longer available!
  24. MIDI Solutions Router

    The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

    Details
    MIDI Solutions Router--9-
    former retail price €125.21 (VAT excl.) No longer available!
  25. MIDI Solutions Relay

    The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

    Details
    MIDI Solutions Relay--9-
    former retail price €125.21 (VAT excl.) No longer available!
  26. MIDI Solutions Quadra Thru

    If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

    Details
    MIDI Solutions Quadra Thru--9-
    former retail price €49.58 (VAT excl.) No longer available!
  27. MIDI Solutions Quadra Merge

    The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

    Details
    MIDI Solutions Quadra Merge--9-
    former retail price €108.40 (VAT excl.) No longer available!
  28. MIDI Solutions Programmable Input Selector

    Special product. Will be ordered only on request. Delivery time 3-4 weeks.

    The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

    Details
    MIDI Solutions Programmable Input Selector--9-
    former retail price €138.66 (VAT excl.) No longer available!
  29. MIDI Solutions Power Adapter

    Phase-out model. Sales only as long as stock lasts

    The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

    Details
    MIDI Solutions Power Adapter--9-
    former retail price €57.98 (VAT excl.) No longer available!
  30. MIDI Solutions Merger

    The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

    Details
    MIDI Solutions Merger--9-
    former retail price €66.39 (VAT excl.) No longer available!
  31. MIDI Solutions M8

    Phase-out model. Sales only as long as stock lasts

    This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

    Details
    MIDI Solutions M8--9-
    former retail price €234.45 (VAT excl.) No longer available!
  32. MIDI Solutions Footswitch Controller

    This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

    Details
    MIDI Solutions Footswitch Controller--9-
    former retail price €125.21 (VAT excl.) No longer available!
  33. MIDI Solutions F8

    Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

    Details
    MIDI Solutions F8--9-
    former retail price €276.47 (VAT excl.) No longer available!
  34. MIDI Solutions Event Processor

    Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

    Details
    MIDI Solutions Event Processor--9-
    former retail price €125.21 (VAT excl.) No longer available!
  35. MIDI Solutions Dual Footswitch Controller

    With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

    Details
    MIDI Solutions Dual Footswitch Controller--9-
    former retail price €142.02 (VAT excl.) No longer available!
  36. MIDI Solutions - MIDI Delay

    The MIDI Delay is a high accuracy programmable MIDI delay.

    Details
    MIDI Solutions MIDI Delay--9-
    former retail price €138.66 (VAT excl.) No longer available!
  37. Microbe Modular - Meta Sequencer

    Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

    Details
    DinSync MODSEQ--1-
    former retail price €158.82 (VAT excl.) No longer available!
  38. Instrumentenkabel ? 6,3KM ? 6,3KM / 1,5m ? PVC

    black instrument cable with one jack on each side. 6.3mm (1/8") mono jack. 1.5m long (5ft)

    Details
    Instrumentenkabel - 6,3KM - 6,3KM / 1,5m - PVC--9-
    former retail price €4.20 (VAT excl.) No longer available!
  39. Innerclock Systems SyncGen2 PRO

    The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

    Details
    Innerclock Systems SyncGen2 PRO--9-
    former retail price €533.61 (VAT excl.) No longer available!
  40. Innerclock Systems Sync-Shift MkIII

    Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

    Details
    Innerclock Systems Sync Shift Mk3
    former retail price €394.12 (VAT excl.) No longer available!
  41. Innerclock Systems - SyncGen2 LS (Eurorack)

    Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
    The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

    Details
    Innerclock Systems SyncGen2 LS module
    former retail price €495.80 (VAT excl.) No longer available!
  42. Indaboxx - greyhound (3U Skiff, aluminium)

    Indaboxx' grexhound is a lightweight and yes sturdy 3U aluminium Skiff with real wood side panels. It offers one 84HP wide row Eurorack modules with a maximal depth of 50 mm. No power supply included.

    Details
    Indaboxx - greyhound
    former retail price €100.00 (VAT excl.) No longer available!
  43. Indaboxx - boxer (6U suitcase, stained wood)

    The boxer is a transportable Eurorack suitcase-style enclosure made of stained wood. It offers two rows of 84HP width. Hand-made in Germany. No power solution included.

    Details
    Indaboxx - boxer (6U suitcase, stained wood)
    former retail price €205.88 (VAT excl.) No longer available!
  44. Indaboxx - boarhound (6U Skiff)

    The boarhound is a beautiful, handmade Skiff enclosure for Eurorack modules, being covered with cloth and sporting nice wooden side panels. It is 6 units high which means it has two rows, each with 84 HP space. No power supply included.

    Details
    Indaboxx - boarhound
    former retail price €163.87 (VAT excl.) No longer available!
  45. Hackme Electronics - Vectr (silver front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!
  46. Hackme Electronics - Vectr (black front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!
  47. Future Retro - XS

    The Future Retro XS offers charming, yet hefty sound with remarkable expressiveness. It is perfect for creating meaty basses, soft to aggressive leads and powerful drums. Thanks to its thought-through routing system, that incorporates audio signals as well as control voltages, the monophonic desktop synthesizer is also capable of creating a wide range of experimental audio effects. MIDI connectors plus Audio and CV jacks allow easy integration in any studio or live setup.

    Details
    Future Retro - Zillion--front
    former retail price €1,000.00 (VAT excl.) No longer available!
  48. Fonitronik Attenuverting Mixer

    Not in production anymore

    The first Fonitronik module is the Attenuverting Mixer. It is primarily a four-into-one mixer module for control voltages (and audio signals of course) but besides of that it has some sub-functions like attenuator, controlable inverter and generator of offset voltages.

    Details
    Fonitronik Attenuverting Mixer
    former retail price €88.24 (VAT excl.) No longer available!
  49. Flight of Harmony - V'amp

    Discontinued

    The V'Amp is a combined voltage-controlled amplifier (VCA) and ring modulator. While typical ring mod devices are designed specifically for frequency mixing, the V'Amp allows you to not only change the degree of the mixing and the level of the bleed through, but can also be used as a VCA at the same time. The mixing can be varied from VCA (carrier only), into ring mod, then out of ring mod into inverting VCA (inverted carrier).

    Details
    Flight of Harmony - V'amp
    former retail price €108.40 (VAT excl.) No longer available!
  50. Flame - 2013 Arpeggiator (incl. X2013 expander)

    Arpeggiator module containing two arpeggiator channels for bass and melody. Each arpeggiator´s pitch and clock (or gate) are available at individual outputs. The first four notes of the melody arpeggio (ARP) are output as chord at four dedicated CV outputs 1-4. With the miniature keyboard notes can be entered directly as cords or scales, The included expansion module X-2013 allows you to output the arpeggios via MIDI, to sync the module to MIDI clock and gives 8 clock outputs for sequencer tracks.

    Details
    Flame 2013 Arpeggiator + X-2013 Expander
    former retail price €315.13 (VAT excl.) No longer available!

Items 1 to 50 of 89 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Nur verfügbare anzeigen