Archive

We don't offer this product anomore

Sample player module that plays up to 72 samples (WAV file, 22kHz, 16Bit, mono) from a SD card! You can control following parameters manually or via CV: Loop size, file position, sample rate and optionally the amplitude due to the integrated VCA. An envelope follower is there as well. Different sounds can be accessed by skipping or randomizing playback files, which can also be accomplished both manually or through a CV input.

We don't offer this product anymore.

Stereo FM radio receiver in Eurorack module format. The parameters frequency and volume can be voltage controlled. Seek and search can be activated with gate and trigger voltages, same for the mute function.

Compact module with two dual-channel oscilloscopes displayed with high-contrast OLED dsisplays. Each oscilloscope can also generate arbitrary waveforms with 8Bit resolution and 44.1kHz sampling rate.

The ADDAC501 does random CV generation and outputs it through three independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized. Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.
It can also be triggered by an external CV source or the internal clock and the output voltages can be either free or quantized (if you prefer to have a standard C Major Pentatonic scale).
Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

We don't offer it anymore

The ADDAC 601 module is an analog fixed filter bank with eight frequency bands. Each band features voltage control of amplitude and a separate envelope follower. A number of audio outputs and many possibilities make this filter bank a superior unit.

ADDAC´s 701 VCO is a fully analog, stable, voltage controlled oscillator with a very wide frequency range.

This module integrates any iOS device (like iPad, iPod or iPhone) into your modular system in order to send and receive audio signals between both machines by the duplex audio connector of the iOS unit.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

New Cycleboxes will be abvailable early May 2012!

The Cyclebox by Cylonix is a digital wavetable VCO. To be exact it is a dual oscillator with additional sub-oscillator and an extreme frequency range off 22 octaves (!). Besides that there are quadrature outputs, voltage controllable wavesahping and much more. Milions of sounds in one module!

This small expander module for the Cyclebox V2 by Cylonix is manufactured by Intellijel and gives you direct access to some hidden extra functions integrated in the Cyclebox V2. Eight switches allow you for activating different modes like the LFO mode or Mega-Mode-Spread etc.

The Terminal will show you the way to your gate ... erm, pardon, it combines tow lopass-gates with two voltage controlled function generators and an internal small stereo-mixer with panning and a headphone output. A voltage controllable digital reverb complements the features of this multi--functional module.
Bonus points go to Endorphines for creative, aviation-inspired artwork and legending :)

One last unit in stock.

Creative eight step pulse sequencer with random and one-shot modes and adjustable loop cycle length, number of repeats and step length. The module can be coupled with other Algorhythms to create longer patterns or to cross-influence the sequencers which can be interesting for polyrhythmics or odd time signatures.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

The Richter Mega-Wave is a wavetable lookup module for processing and distorting signals by 8Bit wave tables. It contains wave forms of the original Wiard Mini-Wave.

The Malekko Wiard Boogie Filter is a lowpass filter and the offical licenced Version of the 1212A Wiard Module.
Just like the Borg the Boogie Filter also has an vactrol based cicuit. It has four different slope outputs: -6db, -12dB, -18dB and -24dB per octave.

Voltage controlled crossfade module with vactrol-based, voltage controlled level

Dual A/B switch module with a common gate switch input and a pushbutton for manual switching,

3U Eurorack module. module width 4HP

The XMIX module is versatile mixer module which you can use as a voltage controlled crossfader or a VCA.
The module is another cooperation between Malekko and Grant Richter from Wiard.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

Just like a sampler that records audio signals, a CV recorder will record control voltage courses from LFOs, envelope generators, joysticks etc. and can play them back when triggered, can loop them or play in different directions.

Modcan´s CV recorder can record CVs on two channels and in addition clocks and triggers on a thrid channel. The maximal resolution is 44.1kHz which makes it possible to record audio, even in stereo. The memory is non-volatile so your recordings remail memorized after powering down your modular system.

Dual digital delay module with individual controls per channel, tap tempo buttons, three selectable time ranges and two operaion modes (with or without pitch shift when altering the delay time).

48kHz sample rate, 16Bit at the inputs and outputs and 32bit operation provide for clear and low-noise sound.

Modcan's digital version of the classic Bode frequency shifter design offers two independent units in one module. As the frequency shift is a mathematical function, why not calculating it with a DSP, also for the sake of stable VCOs and clean multiplication? Calibration will never be an issue and you don't need to match the two units again!

Digital, dual channel phase shifter module with 6, 12 or 24 stages per channel. You can use the module as two independent phaser units or as a stereo phaser. It's possible to control both the phase shift and feedback with voltages.