Archive

We don't offer this product anomore

Sample player module that plays up to 72 samples (WAV file, 22kHz, 16Bit, mono) from a SD card! You can control following parameters manually or via CV: Loop size, file position, sample rate and optionally the amplitude due to the integrated VCA. An envelope follower is there as well. Different sounds can be accessed by skipping or randomizing playback files, which can also be accomplished both manually or through a CV input.

We don't offer this product anymore.

Stereo FM radio receiver in Eurorack module format. The parameters frequency and volume can be voltage controlled. Seek and search can be activated with gate and trigger voltages, same for the mute function.

Compact module with two dual-channel oscilloscopes displayed with high-contrast OLED dsisplays. Each oscilloscope can also generate arbitrary waveforms with 8Bit resolution and 44.1kHz sampling rate.

The ADDAC501 does random CV generation and outputs it through three independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized. Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.
It can also be triggered by an external CV source or the internal clock and the output voltages can be either free or quantized (if you prefer to have a standard C Major Pentatonic scale).
Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

We don't offer it anymore

The ADDAC 601 module is an analog fixed filter bank with eight frequency bands. Each band features voltage control of amplitude and a separate envelope follower. A number of audio outputs and many possibilities make this filter bank a superior unit.

ADDAC´s 701 VCO is a fully analog, stable, voltage controlled oscillator with a very wide frequency range.

This module integrates any iOS device (like iPad, iPod or iPhone) into your modular system in order to send and receive audio signals between both machines by the duplex audio connector of the iOS unit.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Intuitive live sequencer module that produces notes, gates and 3 tempo-synchronised CVs. It offers various clocking options, both input- and output-wise. SD-card memory (4x16 sequences), sequence length up to 64 setps, ratcheting, step repeat, slide, variable gate time per step, integrated mini keyboard with octave switches for easy and precise programming and so many more.

TWEET is a high pass flter ColourCV for mounting inside a ColourPalette module or other systems which accept Colours. But only the ColourPalette will make possible CV control of the Tweet's parameters.

WOOF is a low pass flter ColourCV for mounting inside Colour Palette module or other systems accepting Colours. But only the ColourPalette will make possible CV control of the Woof's parameters.

The Filtaire SE III from US-american manufacturer Division 6 ist an outstanding analog, musically sounding State-Variable multimode filter with a slope of 24dB.

Turn your Erica Sequential Switch into a 8-step analog sequencer with this CV expander.
It combines CV generation with all the functionality of the Sequential Switch like mixing, pausing, random playback, skipping and manual selection of steps.

The ES-2 is a Eurorack module designed for use with software such as Expert Sleepers Silent Way. It takes as inputs CVs from your analogue synths/effects on 3.5mm jacks, and outputs audio signals on 1/4" jacks which you connect to your computer audio interface. You then use the Silent Way CV Input plug-in to interpret the audio signal and output CVs in your DAW for recording, processing etc.

Expert Sleepers´ new module ES-3 converts, in a similar manner as the ES-1, control signals from your DAW (e.g. from software like Volta or Silent Way) to control voltages for your modular system. Unlike the ES-1 it doesn´t use up your audio interface´s analog outputs but it uses the optical output (ADAT Lightpipe standard).

Just connect the ES-3 and the audio interface via an optical cable and output the CVs at the eight minijacks.

The ES-4 is another Expert Sleepers module for converting digital control data from your computer into control voltages. As usual the module is to be connected to your audio interface but in this case you use the S/PDIF socket integrated in almost each laptop computer (and every Mac).

Due to technical restrictions the ES-4 will work only with the Silent Way software (see below).

The ESX-8GT is an gate expander module for Expert Sleepers´ ES-4 to offer eight digital outputs for use as gates, triggers, clocks etc. The Mk1 version is active and can generate gate signals with +12V level.

One last ESX-8GT Mk1 in stock (As of March 11th, 2014)

We have one very last unit in stock - and they won´t come again!

Sounds really nice and fuzzy from soft to hard. A bit dry and in a postive way amputated - kills the overtones a little bit and makes the distortion sounding more round - a solid little box in a pure metal case and a nice sticker on it - a beauty on its own

Runs on a 9v battery, 1/4" in and output.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

The DIXIE CTRL is an expansion module for up to four Intellijel Dixie oscillators. It adds attenuators and controls for pulse width and PWM, linear and exponential FM and a main 1V/octave input.

The expander is suitable for both version, the old 4HP wide Dixie and the new Dixie 2 but not for the Dixie 2+.

Another small module from Intellijel is the uFade, a 4HP wide voltage controlled crossfader.

The uFade is a cooperation between Intellijel and the analog guru David G. Dixon.

The µStep is a 4HP dual trigger/gate sequencer for the space-conscious Eurorack system.
Use this module for Beat/trigger sequencing (great for polyrhythms), Control of adsr/asr envelopes, Clock dividing, Swing Clock, Convert Gate to Trigger

You can expect the first synthesizer from Knas to be different and that is what it is: not your typical clean synth. The subrtactive architecture may look very familiar but the 2 VCOs (one is a subharmonic oscillator), the filter and the envelope have a certein twist. The synth has a duophonic ribbon controller, a semi-modular layout, a quantizer, pre-amp, a MIDI/CV interface and even USB.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!