Archive

We don't offer this product anomore

Sample player module that plays up to 72 samples (WAV file, 22kHz, 16Bit, mono) from a SD card! You can control following parameters manually or via CV: Loop size, file position, sample rate and optionally the amplitude due to the integrated VCA. An envelope follower is there as well. Different sounds can be accessed by skipping or randomizing playback files, which can also be accomplished both manually or through a CV input.

We don't offer this product anymore.

Stereo FM radio receiver in Eurorack module format. The parameters frequency and volume can be voltage controlled. Seek and search can be activated with gate and trigger voltages, same for the mute function.

Compact module with two dual-channel oscilloscopes displayed with high-contrast OLED dsisplays. Each oscilloscope can also generate arbitrary waveforms with 8Bit resolution and 44.1kHz sampling rate.

The ADDAC501 does random CV generation and outputs it through three independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized. Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.
It can also be triggered by an external CV source or the internal clock and the output voltages can be either free or quantized (if you prefer to have a standard C Major Pentatonic scale).
Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

We don't offer it anymore

The ADDAC 601 module is an analog fixed filter bank with eight frequency bands. Each band features voltage control of amplitude and a separate envelope follower. A number of audio outputs and many possibilities make this filter bank a superior unit.

ADDAC´s 701 VCO is a fully analog, stable, voltage controlled oscillator with a very wide frequency range.

This module integrates any iOS device (like iPad, iPod or iPhone) into your modular system in order to send and receive audio signals between both machines by the duplex audio connector of the iOS unit.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Turn your Erica Sequential Switch into a 8-step analog sequencer with this CV expander.
It combines CV generation with all the functionality of the Sequential Switch like mixing, pausing, random playback, skipping and manual selection of steps.

The ES-2 is a Eurorack module designed for use with software such as Expert Sleepers Silent Way. It takes as inputs CVs from your analogue synths/effects on 3.5mm jacks, and outputs audio signals on 1/4" jacks which you connect to your computer audio interface. You then use the Silent Way CV Input plug-in to interpret the audio signal and output CVs in your DAW for recording, processing etc.

Expert Sleepers´ new module ES-3 converts, in a similar manner as the ES-1, control signals from your DAW (e.g. from software like Volta or Silent Way) to control voltages for your modular system. Unlike the ES-1 it doesn´t use up your audio interface´s analog outputs but it uses the optical output (ADAT Lightpipe standard).

Just connect the ES-3 and the audio interface via an optical cable and output the CVs at the eight minijacks.

The ES-4 is another Expert Sleepers module for converting digital control data from your computer into control voltages. As usual the module is to be connected to your audio interface but in this case you use the S/PDIF socket integrated in almost each laptop computer (and every Mac).

Due to technical restrictions the ES-4 will work only with the Silent Way software (see below).

The ESX-8GT is an gate expander module for Expert Sleepers´ ES-4 to offer eight digital outputs for use as gates, triggers, clocks etc. The Mk1 version is active and can generate gate signals with +12V level.

One last ESX-8GT Mk1 in stock (As of March 11th, 2014)

The Richter Mega-Wave is a wavetable lookup module for processing and distorting signals by 8Bit wave tables. It contains wave forms of the original Wiard Mini-Wave.

The Malekko Wiard Boogie Filter is a lowpass filter and the offical licenced Version of the 1212A Wiard Module.
Just like the Borg the Boogie Filter also has an vactrol based cicuit. It has four different slope outputs: -6db, -12dB, -18dB and -24dB per octave.

Voltage controlled crossfade module with vactrol-based, voltage controlled level

Dual A/B switch module with a common gate switch input and a pushbutton for manual switching,

3U Eurorack module. module width 4HP

The XMIX module is versatile mixer module which you can use as a voltage controlled crossfader or a VCA.
The module is another cooperation between Malekko and Grant Richter from Wiard.

Digital replica of the legendary Mellotron, not as a VST-plugin but as a real hardware instrument with a keyboard!

Features and looks resemble the original. Three sounds are available at the same time and it is possible to blend between them with a control.

Pitch- Volume and tone-control plus the ominous "half speed" switch.

Loading sounds from internal CR-Rom drive or from  the card reader slot. Length of samples is limited to eight seconds of course.

Version with anthracite colored housing.

The rackversion of the Memotron now offers the double amount of sounds available simultaneously. You can call the Memotron from Berlin-based manufacturer Manikin Electronics roughly a digital Mellotron. Unlike a VST instrument this is real hardware, so it is perfect for people who want to play Mellotron sounds on stage without the use of a PC or a sensitive original unit.
A comprehensive sample library with high-quality sounds of various Mellotrons from the 60ies and the 70ies lets revive the sound of bands like King Crimson, the Beatles, Procol Harum and other important artists of this era.

It's now part of the Basic Collection.

The Studio collection is a sample library for the Manikin Memotron. It is destined for all those who want to use the classic sounds of the Mellotron but without annoying side-effects like grinding mechanics, worn out and noisy tapes. ll samples have been treated and cleaned and represent an "ideal" flawless Mellotron.

sustain pedal

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!

Phase-out module. Few in stock. Sales only as long as stock lasts.

Six-channel mixer module with panning (even with voltage control on two channels), mute function, a headphone out and main outputs with VU meters. Intended to be used as a final mixer in your system.

Version 2 is a revision of the original analog circuitry to get rid of the annoying bleedthrough.

Phase-out module. Maximum one last in stock. Sales only as long as stock lasts.

The CV professor attenuates, crossfades and sums signals. And on two independent channels he can amplify signals up to the factor 2.