37 Item(s)

per page

Set Descending Direction
Nur verfügbare anzeigen
  1. Alyseum AL-22

    The AL-22 is a MIDI-to-CopperLan interface, i.e. it allows you to use your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

    Details
    Alyseum AL-22--9-
    former retail price €147.06 (VAT excl.) No longer available!
  2. Alyseum AL-88

    The AL-88 is a MIDI-to-CopperLan interface, i.e. it is used to integrate your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers. Up to 16 MIDI cables can be connected (8x MIDI-In and 8x MIDI-Out)

    Details
    Alyseum AL-88--9-
    former retail price €419.33 (VAT excl.) No longer available!
  3. Alyseum AL-88c

    The AL-88c is a CopperLAN interface with eight MIDI In/Out pairs. You can use it as a 8x8 MIDI patchbay, either very flexible in combination with a computer or directly coupled to other CopperLAN devices (peer to peer).
    The unit has the same functionality and features like it's big brother, the AL-88 but at a way lower price for the sake of some reductions.

    Details
    /
    former retail price €167.23 (VAT excl.) No longer available!
  4. Alyseum ALeX

    The AleX from Alyseum is a MIDI-to-CopperLan interface for retrofitting your MIDI devices with a CopperLan connector. It is designed to integrate your MIDI gear into the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

    Details
    Alyseum ALeX--9-
    former retail price €66.39 (VAT excl.) No longer available!
  5. Alyseum MS-812 (Eurorack)

    The MS-812 by Alyseum is an Eurorack module which creates the gateway between your CopperLan network and your Eurorack modular system.

    The high number of CV and digital outputs gives you a very powerful MIDI-to-CV/Gate interface which can also carry clock outputs or can work as a MIDI-to-Sync24 converter. The module can be controlled by several computers in your network simultaneously.

    Details
    Alyseum MS 812 Eurorack module
    former retail price €306.72 (VAT excl.) No longer available!
  6. Eowave 2D G-force controller

    A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

    Item for use and in combination with EoBody2 interface.

    Details
    Eowave 2D G-force controller--9-
    former retail price €62.18 (VAT excl.) No longer available!
  7. Eowave 3D G force controller WIRELESS

    A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

    artikel for use and in combination with the WIRELESS EoBody interface.

    Details
    Eowave 3D G force controller WIRELESS
    former retail price €79.83 (VAT excl.) No longer available!
  8. EoWave Domino

    The EoWave Domino is a compact monophonic analog synthesizer with discrete circuitry for an affordable price.

    Highlights are the eight-step sequencer and the arpeggiator.

    Details
    EoWave Domino
    former retail price €234.45 (VAT excl.) No longer available!
  9. Eowave EoMono

    EoMono, the little brother of the EoBody2 is the first USB plugandplay sensor interface of this kind. It gives  you connection for one sensor. This way you can start with sensor applications easily and for a small price. Just control your software´s parameter assigned by yourself with a desired sensor.

    Eowave Eomono is compatible with all MIDI softwares! No additional MIDI interface is needed.

    Details
    Eowave EOmono
    former retail price €46.22 (VAT excl.) No longer available!
  10. eowave MAGMA

    The last unit for a super low special price!

    The MAGMA, which was called Koma in its prototype stadium, is an analog bassline synthesizer with integrated sequencers, memory and a Roland type low pass filter.

    Details
    EoWave Magma synthesizer--9-
    former retail price €545.38 (VAT excl.) No longer available!
  11. Eowave movement controller

    A movement tilt switch. This movement sensor will not detect accelerations but x,y position.

    artikel for use and in combination with EoBody2 interface.

    Details
    Eowave movement controller--9-
    former retail price €15.97 (VAT excl.) No longer available!
  12. Eowave position ribbon sensor 10 cm

    This 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters. These 10 cm ribbon are also perfect to emulate faders. artikel for use and in combination with EoBody2 interface.

    Details
    Eowave position ribbon sensor 10 cm--9-
    former retail price €41.18 (VAT excl.) No longer available!
  13. EoWave Ribbon Synth

    The EoWave Ribbon is not only a ribbon controller but also a standalone instrument. It contains a digital LoFi-synth with one VCO and frequency modulation.
    Besides of that the unit can be used as a controller both for USB-MIDI and control voltages!

    Details
    EoWave Ribbon Synth--9-
    former retail price €192.44 (VAT excl.) No longer available!
  14. Eowave shock sensor (piezo)

    This sensor is a shock-sensitive pad, a piezo. Ideal for drums and percussive sensoring. Unit for use and in combination with EoBody2 interface.

    Details
    Eowave shock sensor (piezo)--9-
    former retail price €41.18 (VAT excl.) No longer available!
  15. Eowave switch sensor

    50% discount on all remaining EoWave sensors, only as stock lasts (read: as long as delivery status is "immediately available")

    A momentary touch switch (temporary, reacting to "on" as long as you press the button) compatible with eobody1 and eobody2 USB8 SensorBox.

    artikel for use and in combination with EoBody2 interface.

    Details
    Eowave switch sensor--9-
    former retail price €15.97 (VAT excl.) No longer available!
  16. Eowave temperatur sensor

    A temperature sensor reacting on changes of cold and warm compatible with all eobody converters. artikel for use and in combination with EoBody2 interface.

    Details
    Eowave temperatur sensor--9-
    former retail price €15.97 (VAT excl.) No longer available!
  17. Fonitronik Attenuverting Mixer

    Not in production anymore

    The first Fonitronik module is the Attenuverting Mixer. It is primarily a four-into-one mixer module for control voltages (and audio signals of course) but besides of that it has some sub-functions like attenuator, controlable inverter and generator of offset voltages.

    Details
    Fonitronik Attenuverting Mixer
    former retail price €88.24 (VAT excl.) No longer available!
  18. Future Retro - XS

    The Future Retro XS offers charming, yet hefty sound with remarkable expressiveness. It is perfect for creating meaty basses, soft to aggressive leads and powerful drums. Thanks to its thought-through routing system, that incorporates audio signals as well as control voltages, the monophonic desktop synthesizer is also capable of creating a wide range of experimental audio effects. MIDI connectors plus Audio and CV jacks allow easy integration in any studio or live setup.

    Details
    Future Retro - Zillion--front
    former retail price €1,000.00 (VAT excl.) No longer available!
  19. Make Noise - Analog Memory

    The Analog Memory is an expansion module for the Pressure Points. It adds five more rows of each four steps of CVs to the Pressure Point.

    Details
    Make Noise Analog Memory ALT--9-
    former retail price €150.42 (VAT excl.) No longer available!
  20. Make Noise - DIN POWER

    The DIN Power is a simple and inexpensive solution for distributing power in an external case for eurorack modules.
    It uses the power distribution systems of an already existing modular system and sends it to an external case. It is very suitable for building a flat controller case with modules like René, Pressure Points, joystick modules and other haptical controllers.

    Details
    Make Noise Power - DIN POWER--9-
    former retail price €46.22 (VAT excl.) No longer available!
  21. Make Noise - Format Jumbler

    The Format Jumbler is an adaptor module which converts between 3,5mm (1/8")jacks, 6.3mm (1/4") jacks and banana plugs. Additionally you can use the module as a multiples.

    Details
    Make Noise Format Jumbler--9-
    former retail price €96.64 (VAT excl.) No longer available!
  22. Make Noise - Multimode Gate MMG

    Vactrol multimode filter, based on the core of the discoontinued QMMG. It masters a number of sounds, from resonant acid squelch to percussive lowpass-gate sounds like Buchla bongos you an create simultaneously.

    Details
    Make Noise Multimode Gate--9-
    former retail price €226.05 (VAT excl.) No longer available!
  23. Make Noise - Shared System with CV-Bus incl. power cable

    Entire modular system with nine modules from Make Noise. It integrates sound generators, lopass gates, effects, modulation generatros, a haptic controller and a sequencer.
    The unique CV-Bus is designed for convenient distribution of CV signals and adds a pre-amp plus stereo output section.
    The Shared System can be expanded by further modules as 48HP are non-occupied.

    Details
    Make Noise - Shared System with CV-Bus
    former retail price €3,991.60 (VAT excl.) No longer available!
  24. Modcan - CV Record

    Just like a sampler that records audio signals, a CV recorder will record control voltage courses from LFOs, envelope generators, joysticks etc. and can play them back when triggered, can loop them or play in different directions.

    Modcan´s CV recorder can record CVs on two channels and in addition clocks and triggers on a thrid channel. The maximal resolution is 44.1kHz which makes it possible to record audio, even in stereo. The memory is non-volatile so your recordings remail memorized after powering down your modular system.

    Details
    Modcan - CV Recorder--9-
    former retail price €419.33 (VAT excl.) No longer available!
  25. Modcan - Dual Delay

    Dual digital delay module with individual controls per channel, tap tempo buttons, three selectable time ranges and two operaion modes (with or without pitch shift when altering the delay time).

    48kHz sample rate, 16Bit at the inputs and outputs and 32bit operation provide for clear and low-noise sound.

    Details
    Modcan - Dual Delay--1-
    former retail price €575.63 (VAT excl.) No longer available!
  26. Modcan - Dual Freqshifter

    Modcan's digital version of the classic Bode frequency shifter design offers two independent units in one module. As the frequency shift is a mathematical function, why not calculating it with a DSP, also for the sake of stable VCOs and clean multiplication? Calibration will never be an issue and you don't need to match the two units again!

    Details
    Analogue Systems RS-240 Bode Freq Shifter--9-
    former retail price €348.74 (VAT excl.) No longer available!
  27. Modcan - Dual Phaser

    Digital, dual channel phase shifter module with 6, 12 or 24 stages per channel. You can use the module as two independent phaser units or as a stereo phaser. It's possible to control both the phase shift and feedback with voltages.

    Details
    Pittsburgh Modular - Phase Shifter
    former retail price €335.29 (VAT excl.) No longer available!
  28. Modcan - Dual Wave

    The Dual Wave by Modcan is a digital, numerically controlled oscillator module with two parallel oscillators A and B that can be detuned. Each of the oscillators accesses a memory of 180 waves. The mix control not only blends the oscillators but creates a new wave. Wave sequencing by CVs is possible too.

    Details
    Modcan - Dual Wave--9-
    former retail price €377.31 (VAT excl.) No longer available!
  29. Modcan - FMVDO

    The FMVDO is a digital oscillator module with manifold possibilities, very accurate tracking and a wide frequency range. In 12HP it combines features of different digital synthesis methods. The main feature is frequency modulation (FM) with two operators which are not limited to sine waves but offer wavetables for instance and allow for generating sounds with complex timbres. In addition there´s amplitude modulation as well.

    Details
    Modcan - FMVDO--9-
    former retail price €377.31 (VAT excl.) No longer available!
  30. Modcan - Multimode

    Analog multi-mode filter, built discretely in best old.school manner. No ICs here but a nice rough sound and plenty of resonance.

    Details
    Modcan - Multimode
    former retail price €293.28 (VAT excl.) No longer available!
  31. Modcan - Quad Envelope

    Quad ADSR envelope generator with additional delay and hold parameters plus voltage control of either one or all segments of an envelope. The gate inputs are normalized, the envelope curves can be changed and all setting be saved.

    Details
    Modcan - Quad Envelope
    former retail price €461.34 (VAT excl.) No longer available!
  32. Modcan - Triple Osc

    The Triple Osc module combines three high-resolution digital oscillators running in parallel for creating wide multi-oscillator sounds. The sterility of digital oscillators due to the high stability, very accurate tracking and no drifting is criticised by some people. For that reason Modcan incorporated an intelligent circuitry which adds a little randomness and gives pleasant animation and life when you turn off the integrated quantizer.

    Details
    Modcan - Triple Osc--9-
    former retail price €377.31 (VAT excl.) No longer available!
  33. Modcan Touch Sequencer

    Modcan´s first Eurorack module is the Touch Sequencer, a digital four-track sequencer with memory and CV/Gate outputs.

    The four tracks can be up to 64 steps long ,can be chained and each of the track can have an independent clock. The module works either with internal or external clock but the tempo can be tapped with a dedicated button. Resistive Touch screen control of all sequence parameters

    Details
    Modcan - Touch Sequencer--9-
    former retail price €701.68 (VAT excl.) No longer available!
  34. Mungo Enterprises - s0 sampler / looper

    The s0 is two in one: first a 16Bit sample player with three loop modes and variable sample start and loop point parameters. It reads .wav files from an SD card. Number two is a granular synthesis-based looper with audio input, various loop and trigger modes and reset/PLL-synchronization up to audio ranges.

    Details
    Make Noise Phonogene (v.372)--9-
    former retail price €587.40 (VAT excl.) No longer available!
  35. QU-Bit Electronix Nebulæ (silver front)

    Nebulæ is an audio sample player or granular oscillator in the Eurorack modular synthesizer format. It uses sound files as the source material for creating loops, melodies, granular clouds, drones, pads and otherworldy textures. It is also capable of acting as a classic keyboard style MIDI sampler/drum sequencer while in one-shot mode.

    Version with silver front panel.

    Details
    Make Noise Phonogene (v.372)--9-
    former retail price €411.76 (VAT excl.) No longer available!
  36. Sherman Rodec Restyler

    Sherman preist dieses außergewöhnliche Analogfilter primär bei DJs an, sicher werden hier auch zahlreiche Produzenten und Liveacts fündig: Die Eingangsstufe bringt das eingehende Signal gut auf Pegel und lässt auch heftigste Distortion zu! Der Effekt lässt sich mit dem Mix-Regler weich einblenden oder mit dem großzügigen Transform-Taster abrupt einschalten. Jedes Frequenzband (LP, BP, HP) lässt sich anteilig zum Originalsignal zumischen und mit positiver wie auch negativer Amplitudenmodulation einstellen. Zudem kann die Flankensteilheit jedes Bandes zwischen 12 und 24 dB umgeschaltet werden. Der Mastercutoff (blau) arbeitet mit den drei AM Reglern zusammen, wobei der Slavecutoff (grün) mit dem FM-Regler am besten funktioniert. Unterhalb jeden Bandes finden sich je 2 LEDs. Je nach angezeigter Farbe (blau oder grün) wirkt der Master- oder Slavecutoff am effektivsten! Die drei weißen Potis beeinflussen das Groove-Verhältnis des Filters. Auf diese Weise kann man mal eben den kompletten Groove in-sync mit dem Restyler zerfräsen und es macht grossen Spass. -Der Klang ist schön warm und fett und bietet in seinem Dynamikumfang ein ungeahntes Spektrum. Man darf gespannt sein, wie viele Clubanlagen unter der Herrschaft des RESTYLERS demnächst ihr Ende finden werden…

    Details
    Sherman Restyler--9-
    former retail price €419.33 (VAT excl.) No longer available!
  37. Sputnik Modular - Quad VCF/VCA

    The module is a four-fold combination of lowpass filters and/or VCAs. It's functions are extended by three different mix outputs.

    Details
    Make Noise Multimode Gate--9-
    former retail price €247.90 (VAT excl.) No longer available!

37 Item(s)

per page

Set Descending Direction
Nur verfügbare anzeigen