Archive

Not in production anymore.

The bass drum voice circuitry from theTR-808 in an Eurorack module. Unlike the original you can tune the bassdrum; the attack generated by theTone control is somewhat stronger and in general the module has a slightly own sound.

Details

The HP-01 is an useful audio output module with adjustable master output and headphone output. The three input socket make mixing a number of signals possible.

Details

Keyboard version of the Leipzig-S synthesizer. The sound circuitry with 2 VCOs, one Moog filter, 2 ADSRs and a LFO remained unchanged but additionally there´s a 37-key keyboard with a LCD for editing keyboard parameters.

Details

Affordable and simple basic VCO is 6HP width featuring the most inportant functions. It has CV inputs for frequency and pulse width, waveformwise we´ll find sawtooth and pulse.

Details

Small, passive adaptor module containing two adapters from 3.5mm jack to 6.3mm (1/4") jack.

Details

Not in production anymore.

The BD78 is an accurate replica of the CR78 bass drum sound. Due to its tune control and decay parameters TR808 style Toms and Congas can be produced, too. The BD78 can be tuned way low with long decays.

Details

Not in production anymore.

Drum voice module with the circuitry of the TR-808 cowbell, with expanded parameters like e.g. two separate tune controls for both tone generators

Details

Not in production anymore.

Drum module with the circuitry of the TR-808. Like the original you can control tune and level

Details

Not in production anymore.

Drum voice with the CLAVES circutry from the Roland TR-808.

Details

Analogue Solutions CV-to-MIDI converts two channels of CV and gate information into MIDI note commands.

Details

The module generates 8 trigger signals at 8 jacks in dependancy ofthe value of an incoming voltage.

ATTENTION: the module needs an additional 5V operational voltage!

Details

Eurorack version of the Analogue Solutions Oberkorn³ analog sequencer. If has three tracks of CVs ,two gate tracks and interesting binary step address fuctions. Besides this the module features a voltage controlled clock generator, reset buttons, a transpose input per CV row and also slide at row A and B. Pure sequencer power on 84HP width.

Details

The Europa is a hardware steps sequencer with 16 steps. It can be used for programming melody and drum patterns and outputs besides MIDI analog triggers as well.

Details

Not in production anymore.

Both the open and the closed HiHat sound of the TR808 come in this Eurorack drum voice module.

Details

The Leipzig-S is the improved version of Analogue Solutions´ Leipzig synthesizer. Besides the flat housing which makes it possible to use the unit on a desk, Analogue Solutions added a handy eight-step analog sequencer which can of course be synchronised to MIDI.

Details

Simple and narrow LFO module with two wave forms.

Details

The VCO SUB features an analog VCO with a sub-oscillator section. All three sub-octaves generated by the sub-oscillator are derived from the oscillator´s frequency.

Details

The MT9 is an advanced MIDI to triggering module. It allows triggering of a range of analogue devices; drum voice modules, envelope modules, analogue sequencers, analogue drum machines, and anything else with a gate, trigger or clock input.

Details

The MX224 is a 2 input mixer, inverter and buffer. It can mix audio, control voltages and gates with multiple normal and inverted outputs. Ideal for buffered multiplying signals with no signal drop.

Details

Simple yet very useful small module: a mixer with six unity gain inputs, one normal and one inverted sum output. You can use the module as an inverter, too.

Details

The Oberkorn³ is the recent model of the Oberkorn sequencer series, now in a nice metal housing and many features like internal Clock generator, transpose inputs, MIDI and glide.

Details

Not in production anymore.

Analogue Solutions´ drum sound module for the Eurorack. Reproduction of the circuitry of the TR-808 Rimshot.

Details

Not in production anymore.

Discrete analog drum voice with the circuitry of Roland´s CR-78 snare drum with an additional tune parameter.

Details

Not in production anymore.

Analogue Solutions SD88 is a faithful reproduction of Roland´s TR-808 snare drum with a few extras.

Details

A nice module by Analogue Solutions is the SH-NZ which stands for Sample and Hold  and Noise. And that´s exactly what´s inside.

Details

The SQ-8 is a one-track CV sequencer with 8 steps. As the SQ-8 is an independent sequencer you can run several of them, each with an other clock.

Details

Analogue Solutions SY02 Multimode Filter/VCA A great module with a multimode filter and a VCA.

Details

Monophonic analog synthesizer with the layout of a Oberheim SEM. The Telemark is the semi-modular version of the SEMblance by Analogue Solutions. the new version Telemark v2 now has a ring modulator and a sub oscillator (divder circuit).

Details

Analogue Solutions Tereshkova synth is basically the same as the Vostok but it lacks the pin matrix patch panel and the VU meter.

Details

Not in production anymore.

Analog Eurorack drum module with the circuitry of the Roland TR-808 TomToms wit additional noise parameter

Details

The VCO-RING MOD combines an analog VCO and an independent ring modulator circuit

Details

As a modular synthesizer with the 22x22 pin patch matrix and extraordinary features like 3VCOs, a 8 step sequencer and a joystick, the Vostok Deluxe is clearly a unique workstation. Vostok Deluxe features a bigger case, a spring reverb, sequencer with a step-repeat function, a third LFO and more sockets and attenuators.

Details

The module VU01 is a classic VU meter for displaying input signal strength by a moving needle.

Details

The MMF-1 is one of Cwejman´s best developments. It is a very clean and precise multimode filter partly featuring new filter types like a dual bandpass mode with adjustable spacing of filter peaks and also other filter types.

Details

Module is not in production anymore

High-end stereo ring modulator with integrated phase shifted carrier oscillators. You can use it as a stereo device or as two mono ring modulators.

Details

Spare 19" rack ears for your Cwejman S1Mk2 synth. In case you painted, drilled or lost your original ones. Details

Not in our portfolio anymore

The name already indicates it: the Analog Four by Elekron continas four independent monophonic synthesizers in one unit. Besides the entirely analog voice circuitry with two oscillators and two filters per synth and plenty of modulation possibilities the Analog Four has FX and also a step sequencer that can output CV/gate signals as well.

Details

We have one very last unit in stock - and they won´t come again!

Sounds really nice and fuzzy from soft to hard. A bit dry and in a postive way amputated - kills the overtones a little bit and makes the distortion sounding more round - a solid little box in a pure metal case and a nice sticker on it - a beauty on its own

Runs on a 9v battery, 1/4" in and output.

Details

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

Details

The MIDI Delay is a high accuracy programmable MIDI delay.

Details

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Details

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Details

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

Details

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Details

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

Details

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Details

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Details

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

Details

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Details