Archive

Not in production anymore.

The bass drum voice circuitry from theTR-808 in an Eurorack module. Unlike the original you can tune the bassdrum; the attack generated by theTone control is somewhat stronger and in general the module has a slightly own sound.

The HP-01 is an useful audio output module with adjustable master output and headphone output. The three input socket make mixing a number of signals possible.

Keyboard version of the Leipzig-S synthesizer. The sound circuitry with 2 VCOs, one Moog filter, 2 ADSRs and a LFO remained unchanged but additionally there´s a 37-key keyboard with a LCD for editing keyboard parameters.

Affordable and simple basic VCO is 6HP width featuring the most inportant functions. It has CV inputs for frequency and pulse width, waveformwise we´ll find sawtooth and pulse.

Small, passive adaptor module containing two adapters from 3.5mm jack to 6.3mm (1/4") jack.

Not in production anymore.

The BD78 is an accurate replica of the CR78 bass drum sound. Due to its tune control and decay parameters TR808 style Toms and Congas can be produced, too. The BD78 can be tuned way low with long decays.

Not in production anymore.

Drum voice module with the circuitry of the TR-808 cowbell, with expanded parameters like e.g. two separate tune controls for both tone generators

Not in production anymore.

Drum module with the circuitry of the TR-808. Like the original you can control tune and level

Not in production anymore.

Drum voice with the CLAVES circutry from the Roland TR-808.

Analogue Solutions CV-to-MIDI converts two channels of CV and gate information into MIDI note commands.

The module generates 8 trigger signals at 8 jacks in dependancy ofthe value of an incoming voltage.

ATTENTION: the module needs an additional 5V operational voltage!

Eurorack version of the Analogue Solutions Oberkorn³ analog sequencer. If has three tracks of CVs ,two gate tracks and interesting binary step address fuctions. Besides this the module features a voltage controlled clock generator, reset buttons, a transpose input per CV row and also slide at row A and B. Pure sequencer power on 84HP width.

The Europa is a hardware steps sequencer with 16 steps. It can be used for programming melody and drum patterns and outputs besides MIDI analog triggers as well.

Not in production anymore.

Both the open and the closed HiHat sound of the TR808 come in this Eurorack drum voice module.

The Leipzig-S is the improved version of Analogue Solutions´ Leipzig synthesizer. Besides the flat housing which makes it possible to use the unit on a desk, Analogue Solutions added a handy eight-step analog sequencer which can of course be synchronised to MIDI.

Simple and narrow LFO module with two wave forms.

The VCO SUB features an analog VCO with a sub-oscillator section. All three sub-octaves generated by the sub-oscillator are derived from the oscillator´s frequency.

The MT9 is an advanced MIDI to triggering module. It allows triggering of a range of analogue devices; drum voice modules, envelope modules, analogue sequencers, analogue drum machines, and anything else with a gate, trigger or clock input.

The MX224 is a 2 input mixer, inverter and buffer. It can mix audio, control voltages and gates with multiple normal and inverted outputs. Ideal for buffered multiplying signals with no signal drop.

Simple yet very useful small module: a mixer with six unity gain inputs, one normal and one inverted sum output. You can use the module as an inverter, too.

The Oberkorn³ is the recent model of the Oberkorn sequencer series, now in a nice metal housing and many features like internal Clock generator, transpose inputs, MIDI and glide.

Not in production anymore.

Analogue Solutions´ drum sound module for the Eurorack. Reproduction of the circuitry of the TR-808 Rimshot.

Not in production anymore.

Discrete analog drum voice with the circuitry of Roland´s CR-78 snare drum with an additional tune parameter.

Not in production anymore.

Analogue Solutions SD88 is a faithful reproduction of Roland´s TR-808 snare drum with a few extras.

A nice module by Analogue Solutions is the SH-NZ which stands for Sample and Hold  and Noise. And that´s exactly what´s inside.

The SQ-8 is a one-track CV sequencer with 8 steps. As the SQ-8 is an independent sequencer you can run several of them, each with an other clock.

Analogue Solutions SY02 Multimode Filter/VCA A great module with a multimode filter and a VCA.

Monophonic analog synthesizer with the layout of a Oberheim SEM. The Telemark is the semi-modular version of the SEMblance by Analogue Solutions. the new version Telemark v2 now has a ring modulator and a sub oscillator (divder circuit).

Analogue Solutions Tereshkova synth is basically the same as the Vostok but it lacks the pin matrix patch panel and the VU meter.

Not in production anymore.

Analog Eurorack drum module with the circuitry of the Roland TR-808 TomToms wit additional noise parameter

The VCO-RING MOD combines an analog VCO and an independent ring modulator circuit

As a modular synthesizer with the 22x22 pin patch matrix and extraordinary features like 3VCOs, a 8 step sequencer and a joystick, the Vostok Deluxe is clearly a unique workstation. Vostok Deluxe features a bigger case, a spring reverb, sequencer with a step-repeat function, a third LFO and more sockets and attenuators.

The module VU01 is a classic VU meter for displaying input signal strength by a moving needle.

Special price only as stock (of last 4 units) lasts.

The Mute Synth by Dirty Electronics is an inexpensive hand-held touch and tilt instrument with copper etched artwork and contoured printed circuit board that was designed in collaboration with the legendary record label MUTE.

A must for all MUTE fans and a perfect gift!

Erica's Skiff is a flat Eurorack case made of aluminium, offering two rows of 84HP width and an usable depth of 50mm. It has an integrated power distribution but you can choose between two separately available external power supplies.
Optionally you can expand the case by rack ears or wooden side panels.

The first module from the Medic Modules series is the DEFIBRILLATOR. It consists of thee individual circuits: two MS-20 filters and a VCA. Very individual is the operation by illuminated faders and the very unique bloody artwork. Sounds kind of sick and nasty.

The EKG is a versatile analog sequencer module with a funky voltage controllable halftime function and not less than eight selectable functions per step (pause, skip, up to 4x repeat, reverse, reset).

Einfach und genial aber vor allem: es funktioniert! Wer als Keyboarder, Percussionist oder DJ  seine laufenden Sequenzer zu human variierendem Tempo oder auch einfach zum DJ-Beat synchronisieren will oder muss, ist mit dem 34oneII-Pedal gut beraten.

Nach einer kurzen Eingewöhnungszeit trifft man die eins und kann auch Temposchwankungen gekonnt abfangen oder aufholen, es werden immer die letzten fünf Taps zur Berechnung des laufenden Tempos benutzt. Wenn man länger als 1 Sekunde auf dem Taster steht, sendet das Pedal auf allen Kanälen einen Stop-Befehl und verbraucht ab sofort nichts mehr von dem Strom der Batterie. Die Lebensdauer des 9V Blocks liegt oberhalb von 50 Stunden.

With the Perc Pro, you can add an acoustic drummer to your setup. In contrast to the counterpart made of flesh and blood, this drum system always plays tight and never gets tired. In addition, Perc Pro doesn’t mind to play everyday items instead of kick, snare, cymbal and so forth. – Bottles, cans or sheets of metal. Lots of stuff works great as a percussion instrument. Simply connect your MIDI or CV / gate equipment and start experimenting. – A great novelty with enormous creative potential!

As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

This MIDI interface definitely stands out because monophonic conversion of MIDI notes (from MIDI In or USB) into CV and gate as well as MIDI Clock to analog clock is one function only. As the USB port in this module can send data too, you might as well convert MIDI data from the DIN socket to USB MIDI (or the other way round) and convert analog clock into MIDI Clock.
Let's read the sentence one again: use your modular system for generating a MIDI master Clock and synchronise for instance your computer to your modular!!!

A dual drone monster with echo and voltage control, that's what Synthrotek's Nandamonium is about. It consists of two NAND synthesizer circuits with three oscillators each and a great delay you might know from their "Echo" Eurorack module.

This passive bus board's main feature are the noise filtering capacitors located at three locations of the board. They reduce noise and bleedthru between modules and provide for clean signals. 17 connectors for modules are more than competitors' busboards offer.

Karl Marx Stadt is a front-end for Doepfer's DIY synth and it's a super-easy solution to turn it into an Eurorack synthesizer voice. No soldering and screwing required, just plug and play! It takes 5 seconds!