Archive

The AL-22 is a MIDI-to-CopperLan interface, i.e. it allows you to use your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

Details

The AL-88 is a MIDI-to-CopperLan interface, i.e. it is used to integrate your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers. Up to 16 MIDI cables can be connected (8x MIDI-In and 8x MIDI-Out)

Details

The AL-88c is a CopperLAN interface with eight MIDI In/Out pairs. You can use it as a 8x8 MIDI patchbay, either very flexible in combination with a computer or directly coupled to other CopperLAN devices (peer to peer).
The unit has the same functionality and features like it's big brother, the AL-88 but at a way lower price for the sake of some reductions.

Details

The AleX from Alyseum is a MIDI-to-CopperLan interface for retrofitting your MIDI devices with a CopperLan connector. It is designed to integrate your MIDI gear into the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

Details

The MS-812 by Alyseum is an Eurorack module which creates the gateway between your CopperLan network and your Eurorack modular system.

The high number of CV and digital outputs gives you a very powerful MIDI-to-CV/Gate interface which can also carry clock outputs or can work as a MIDI-to-Sync24 converter. The module can be controlled by several computers in your network simultaneously.

Details

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

Details

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Details

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Details

The MMF-1 is one of Cwejman´s best developments. It is a very clean and precise multimode filter partly featuring new filter types like a dual bandpass mode with adjustable spacing of filter peaks and also other filter types.

Details

Module is not in production anymore

High-end stereo ring modulator with integrated phase shifted carrier oscillators. You can use it as a stereo device or as two mono ring modulators.

Details

Spare 19" rack ears for your Cwejman S1Mk2 synth. In case you painted, drilled or lost your original ones. Details

No longer available in beech!

Portable and foldable Eurorack case with three rows á 126 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling.
The UNO 126 contains the SILTA power supply solution with 3.75 Ampere, the SEI trunk line module and is supplied with a padded soft bag.

Details

No longer available in beech wood

Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

Details

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Details

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

Details

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

External 9V DC power supply, BOSS-style. Can be used with all Koma Elektronik products. Polarity is like those of guitar effects pedals: center negative, ring positive.

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The BD101 by KOMA Elektronik is a very special analog delay which differs completely from conventional analog delay pedals, soundwise but also featurewise. It allows for sick, chopped sounds that can resemble a bit crusher. You can easily and quickly blend from thick, long delays to extremely short pulses.
Inputs and outputs for control voltages make it possible to combine the BD101 with other (KOMA-) pedals but of course also with a modular synthesizer! An infrared motion sensor allows for gestical control of parameters.

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The FT-201 by KOMA Elektronik is an unique, innovative filter stompbox effect with an internal 10-step sequencer. In addition it can be controlled by an infrared motion sensor and thus be played gestically!

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The medium sized Kabelhänger kills two birds with one stone :
Another 2HP gap in your system is filled and your, now well-organized, cables hang around like a relaxed sloth.

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Kommander by KOMA Elektronik is a dual X/Y infrared motion controller for your modular system. Simply connect it to CV and gate inputs, move your hand (foot or what have you) above it and generate modulations by gestures.

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

Powerful step sequencer built around four really properly well-equipped full-featured 16-step sequencers communicating via both MIDI and CV/Gate. There are no screens or submenus - all features have their own dedicated controls and have their own dedicated in- and outputs on the large 87-point patch bay. Lastly a seven bank CV Recorder is on board and can output up to 5 banks at once!
The Komplex Sequencer opens up a whole new world of creative possibilities and starts where other sequencers have stopped, for instance when it comes to crossmodulations or patching the sequencers crosswise. Very experimental and not only fine in the studio but also on stage.

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Poltergeist, being an entirely voltage controllable quadrophonix mixer is a very extraordinary and unique module you can mix and control signals quadraphonically with complete control and beyond. Four channels each with it’s own VCA, plus a stereo auxiliary input, are mixed out to four separate outputs enabling the user to manipulate signals both stereophonically and quadraphonically in entirely new and ghostly ways.
With not less than 48 analog SSM-VCAs it's a very laborious module KOMA needed a lot of brain juice and patience for.

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The RH-301 synchronises analog clock, MIDI clock and DIN Sync by a tap- and sync-able tempo generator with additional syncable LFO and an envelope generator. A great master clock synchronizer mega utility unit and the first of it´s kind!

Details

Please order directly with KOMA Elektronik https://koma-elektronik.com/

State variable multi-mode filter with optical components (vactrols) that provide for a good sound. Three filter types are available and you can blend between them. Voltage control of cutoff, resonance and mix.

Details

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

Details

The MIDI Delay is a high accuracy programmable MIDI delay.

Details

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Details

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Details

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

Details

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Details

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

Details

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Details

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Details

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

Details

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Details

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

Details

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

Details

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

Details

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

Details

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Details

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

Details

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

Details

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

Details

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

Details

Just like a sampler that records audio signals, a CV recorder will record control voltage courses from LFOs, envelope generators, joysticks etc. and can play them back when triggered, can loop them or play in different directions.

Modcan´s CV recorder can record CVs on two channels and in addition clocks and triggers on a thrid channel. The maximal resolution is 44.1kHz which makes it possible to record audio, even in stereo. The memory is non-volatile so your recordings remail memorized after powering down your modular system.

Details

Dual digital delay module with individual controls per channel, tap tempo buttons, three selectable time ranges and two operaion modes (with or without pitch shift when altering the delay time).

48kHz sample rate, 16Bit at the inputs and outputs and 32bit operation provide for clear and low-noise sound.

Details

Modcan's digital version of the classic Bode frequency shifter design offers two independent units in one module. As the frequency shift is a mathematical function, why not calculating it with a DSP, also for the sake of stable VCOs and clean multiplication? Calibration will never be an issue and you don't need to match the two units again!

Details

Digital, dual channel phase shifter module with 6, 12 or 24 stages per channel. You can use the module as two independent phaser units or as a stereo phaser. It's possible to control both the phase shift and feedback with voltages.

Details