Items 1 to 50 of 54 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Nur verfügbare anzeigen
  1. Alyseum AL-22

    The AL-22 is a MIDI-to-CopperLan interface, i.e. it allows you to use your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

    Details
    Alyseum AL-22--9-
    former retail price €147.06 (VAT excl.) No longer available!
  2. Alyseum AL-88

    The AL-88 is a MIDI-to-CopperLan interface, i.e. it is used to integrate your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers. Up to 16 MIDI cables can be connected (8x MIDI-In and 8x MIDI-Out)

    Details
    Alyseum AL-88--9-
    former retail price €419.33 (VAT excl.) No longer available!
  3. Alyseum AL-88c

    The AL-88c is a CopperLAN interface with eight MIDI In/Out pairs. You can use it as a 8x8 MIDI patchbay, either very flexible in combination with a computer or directly coupled to other CopperLAN devices (peer to peer).
    The unit has the same functionality and features like it's big brother, the AL-88 but at a way lower price for the sake of some reductions.

    Details
    /
    former retail price €167.23 (VAT excl.) No longer available!
  4. Alyseum ALeX

    The AleX from Alyseum is a MIDI-to-CopperLan interface for retrofitting your MIDI devices with a CopperLan connector. It is designed to integrate your MIDI gear into the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

    Details
    Alyseum ALeX--9-
    former retail price €66.39 (VAT excl.) No longer available!
  5. Alyseum MS-812 (Eurorack)

    The MS-812 by Alyseum is an Eurorack module which creates the gateway between your CopperLan network and your Eurorack modular system.

    The high number of CV and digital outputs gives you a very powerful MIDI-to-CV/Gate interface which can also carry clock outputs or can work as a MIDI-to-Sync24 converter. The module can be controlled by several computers in your network simultaneously.

    Details
    Alyseum MS 812 Eurorack module
    former retail price €306.72 (VAT excl.) No longer available!
  6. Analogue Systems / Cliff - 15cm patchcables (5-Pack)

    Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

    Details
    /
    former retail price €10.92 (VAT excl.) No longer available!
  7. Analogue Systems RS-190 VU-Meter / Inverter

    RS-190 is out of production

    The RS-190 combines a real analog VU meter with an inverter

    Details
    Analogue Systems RS-190  VU-Meter / Inverter Modul
    former retail price €142.02 (VAT excl.) No longer available!
  8. Analogue Systems RS-240 Bode Freq Shifter

    Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

    Details
    Analogue Systems RS-240 Bode Freq Shifter--9-
    former retail price €1,350.00 (VAT excl.) No longer available!
  9. Brandon Smith´s Piston Honda ROMs

    Brandon Smith's set of 4 EPROMS with sound banks for the Piston Honda.
    You can exchange the pre-installed ROM chips with other ones to get new sounds and wavetables. To install all four Eeproms simultaneously you need a Harvestman ROM expander for the Piston Honda which will give you the possiblitly to have six eeproms installed in your module.

    Details
    The Harvestman Piston Honda ROM from B. Smith
    former retail price €33.61 (VAT excl.) No longer available!
  10. Eowave 2D G-force controller

    A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

    Item for use and in combination with EoBody2 interface.

    Details
    Eowave 2D G-force controller--9-
    former retail price €62.18 (VAT excl.) No longer available!
  11. Eowave 3D G force controller WIRELESS

    A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

    artikel for use and in combination with the WIRELESS EoBody interface.

    Details
    Eowave 3D G force controller WIRELESS
    former retail price €79.83 (VAT excl.) No longer available!
  12. EoWave Domino

    The EoWave Domino is a compact monophonic analog synthesizer with discrete circuitry for an affordable price.

    Highlights are the eight-step sequencer and the arpeggiator.

    Details
    EoWave Domino
    former retail price €234.45 (VAT excl.) No longer available!
  13. Eowave EoMono

    EoMono, the little brother of the EoBody2 is the first USB plugandplay sensor interface of this kind. It gives  you connection for one sensor. This way you can start with sensor applications easily and for a small price. Just control your software´s parameter assigned by yourself with a desired sensor.

    Eowave Eomono is compatible with all MIDI softwares! No additional MIDI interface is needed.

    Details
    Eowave EOmono
    former retail price €46.22 (VAT excl.) No longer available!
  14. eowave MAGMA

    The last unit for a super low special price!

    The MAGMA, which was called Koma in its prototype stadium, is an analog bassline synthesizer with integrated sequencers, memory and a Roland type low pass filter.

    Details
    EoWave Magma synthesizer--9-
    former retail price €545.38 (VAT excl.) No longer available!
  15. Eowave movement controller

    A movement tilt switch. This movement sensor will not detect accelerations but x,y position.

    artikel for use and in combination with EoBody2 interface.

    Details
    Eowave movement controller--9-
    former retail price €15.97 (VAT excl.) No longer available!
  16. Eowave position ribbon sensor 10 cm

    This 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters. These 10 cm ribbon are also perfect to emulate faders. artikel for use and in combination with EoBody2 interface.

    Details
    Eowave position ribbon sensor 10 cm--9-
    former retail price €41.18 (VAT excl.) No longer available!
  17. EoWave Ribbon Synth

    The EoWave Ribbon is not only a ribbon controller but also a standalone instrument. It contains a digital LoFi-synth with one VCO and frequency modulation.
    Besides of that the unit can be used as a controller both for USB-MIDI and control voltages!

    Details
    EoWave Ribbon Synth--9-
    former retail price €192.44 (VAT excl.) No longer available!
  18. Eowave shock sensor (piezo)

    This sensor is a shock-sensitive pad, a piezo. Ideal for drums and percussive sensoring. Unit for use and in combination with EoBody2 interface.

    Details
    Eowave shock sensor (piezo)--9-
    former retail price €41.18 (VAT excl.) No longer available!
  19. Eowave switch sensor

    50% discount on all remaining EoWave sensors, only as stock lasts (read: as long as delivery status is "immediately available")

    A momentary touch switch (temporary, reacting to "on" as long as you press the button) compatible with eobody1 and eobody2 USB8 SensorBox.

    artikel for use and in combination with EoBody2 interface.

    Details
    Eowave switch sensor--9-
    former retail price €15.97 (VAT excl.) No longer available!
  20. Eowave temperatur sensor

    A temperature sensor reacting on changes of cold and warm compatible with all eobody converters. artikel for use and in combination with EoBody2 interface.

    Details
    Eowave temperatur sensor--9-
    former retail price €15.97 (VAT excl.) No longer available!
  21. Innerclock Systems - SyncGen2 LS (Eurorack)

    Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
    The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

    Details
    Innerclock Systems SyncGen2 LS module
    former retail price €495.80 (VAT excl.) No longer available!
  22. Innerclock Systems Sync-Shift MkIII

    Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

    Details
    Innerclock Systems Sync Shift Mk3
    former retail price €394.12 (VAT excl.) No longer available!
  23. Innerclock Systems SyncGen2 PRO

    The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

    Details
    Innerclock Systems SyncGen2 PRO--9-
    former retail price €533.61 (VAT excl.) No longer available!
  24. Maker.IE - Patchblocks (black)

    The licensed Eurorack version of the programmable mini synthesizer Patchblocks allows the user to to program and to customize the module's behaviour via a intuitive software editor.
    Some of the functions the module is capable of are VCO, clock divider, envelope and random generators, counter, shepard generator, sequencer, MIDI converter and many more. It is even possible to use it as a sample player (e.g. for drums) or as an effect.

    Details
    Maker.IE - Patchblocks (black)
    former retail price €158.82 (VAT excl.) No longer available!
  25. Microbe Modular - Meta Sequencer

    Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

    Details
    DinSync MODSEQ--1-
    former retail price €158.82 (VAT excl.) No longer available!
  26. MIDI Solutions - MIDI Delay

    The MIDI Delay is a high accuracy programmable MIDI delay.

    Details
    MIDI Solutions MIDI Delay--9-
    former retail price €138.66 (VAT excl.) No longer available!
  27. MIDI Solutions Dual Footswitch Controller

    With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

    Details
    MIDI Solutions Dual Footswitch Controller--9-
    former retail price €142.02 (VAT excl.) No longer available!
  28. MIDI Solutions Event Processor

    Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

    Details
    MIDI Solutions Event Processor--9-
    former retail price €125.21 (VAT excl.) No longer available!
  29. MIDI Solutions F8

    Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

    Details
    MIDI Solutions F8--9-
    former retail price €276.47 (VAT excl.) No longer available!
  30. MIDI Solutions Footswitch Controller

    This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

    Details
    MIDI Solutions Footswitch Controller--9-
    former retail price €125.21 (VAT excl.) No longer available!
  31. MIDI Solutions M8

    Phase-out model. Sales only as long as stock lasts

    This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

    Details
    MIDI Solutions M8--9-
    former retail price €234.45 (VAT excl.) No longer available!
  32. MIDI Solutions Merger

    The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

    Details
    MIDI Solutions Merger--9-
    former retail price €66.39 (VAT excl.) No longer available!
  33. MIDI Solutions Power Adapter

    Phase-out model. Sales only as long as stock lasts

    The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

    Details
    MIDI Solutions Power Adapter--9-
    former retail price €57.98 (VAT excl.) No longer available!
  34. MIDI Solutions Programmable Input Selector

    Special product. Will be ordered only on request. Delivery time 3-4 weeks.

    The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

    Details
    MIDI Solutions Programmable Input Selector--9-
    former retail price €138.66 (VAT excl.) No longer available!
  35. MIDI Solutions Quadra Merge

    The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

    Details
    MIDI Solutions Quadra Merge--9-
    former retail price €108.40 (VAT excl.) No longer available!
  36. MIDI Solutions Quadra Thru

    If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

    Details
    MIDI Solutions Quadra Thru--9-
    former retail price €49.58 (VAT excl.) No longer available!
  37. MIDI Solutions Relay

    The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

    Details
    MIDI Solutions Relay--9-
    former retail price €125.21 (VAT excl.) No longer available!
  38. MIDI Solutions Router

    The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

    Details
    MIDI Solutions Router--9-
    former retail price €125.21 (VAT excl.) No longer available!
  39. MIDI Solutions T8

    If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

    Details
    MIDI Solutions T8--9-
    former retail price €167.23 (VAT excl.) No longer available!
  40. MIDI Solutions Thru

    If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

    Details
    MIDI Solutions Thru--9-
    former retail price €41.18 (VAT excl.) No longer available!
  41. MIDI Solutions Velocity Converter

    Phase-out model. Sales only as long as stock lasts

    This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

    Details
    MIDI Solutions Velocity Converter--9-
    former retail price €125.21 (VAT excl.) No longer available!
  42. Midisolutions Breathcontroller

    The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

    Attention: Yamaha doesn´t manufacture the breath controllers anymore!

    Details
    MIDI Solutions Breath Controller--9-
    former retail price €167.23 (VAT excl.) No longer available!
  43. Midisolutions Eventprocessor / plus

    phase out model. Sales only as long as stock lasts.

    The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

    Details
    MIDI Solutions Event Processor Plus--9-
    former retail price €158.82 (VAT excl.) No longer available!
  44. Midisolutions pedal-to-midi-converter

    To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

    Details
    MIDI Solutions Pedal Controller--9-
    former retail price €125.21 (VAT excl.) No longer available!
  45. Sherman Rodec Restyler

    Sherman preist dieses außergewöhnliche Analogfilter primär bei DJs an, sicher werden hier auch zahlreiche Produzenten und Liveacts fündig: Die Eingangsstufe bringt das eingehende Signal gut auf Pegel und lässt auch heftigste Distortion zu! Der Effekt lässt sich mit dem Mix-Regler weich einblenden oder mit dem großzügigen Transform-Taster abrupt einschalten. Jedes Frequenzband (LP, BP, HP) lässt sich anteilig zum Originalsignal zumischen und mit positiver wie auch negativer Amplitudenmodulation einstellen. Zudem kann die Flankensteilheit jedes Bandes zwischen 12 und 24 dB umgeschaltet werden. Der Mastercutoff (blau) arbeitet mit den drei AM Reglern zusammen, wobei der Slavecutoff (grün) mit dem FM-Regler am besten funktioniert. Unterhalb jeden Bandes finden sich je 2 LEDs. Je nach angezeigter Farbe (blau oder grün) wirkt der Master- oder Slavecutoff am effektivsten! Die drei weißen Potis beeinflussen das Groove-Verhältnis des Filters. Auf diese Weise kann man mal eben den kompletten Groove in-sync mit dem Restyler zerfräsen und es macht grossen Spass. -Der Klang ist schön warm und fett und bietet in seinem Dynamikumfang ein ungeahntes Spektrum. Man darf gespannt sein, wie viele Clubanlagen unter der Herrschaft des RESTYLERS demnächst ihr Ende finden werden…

    Details
    Sherman Restyler--9-
    former retail price €419.33 (VAT excl.) No longer available!
  46. Snazzy FX - Dreamboat module

    The first Eurorack module by Snazzy FX is a dual Chaos Oscillator. Unlike normal VCOs it is not intended to produce tonal results but for creating chaotic, wild and unpredictable sounds, modulations and gates.

    Details
    Snazzy FX - Dreamboat module--9-
    former retail price €189.08 (VAT excl.) No longer available!
  47. The Harvestman - Black Locust

    Black Locust, the improved successor of the old Stilton Adaptor is a four-channel guitar effects pedal adaptor for your synth, using each channel as a FX send/return for one pedal. It offers gain adjustment and a dry/wet control per channel. Alternatively you can use each channel as a guitar pre-amplifier.
    With no external input signals, the four pedals can operate in a closed feedback loop, self-generating audio signals that are impossible to directly control - only influence.

    Details
    The Harvestman - Black Locust
    former retail price €268.91 (VAT excl.) No longer available!
  48. The Harvestman - Double Andore MkII

    The Double Andore's Mk2-version is also a dual digital envelope, featuring a cycle mode, digital waveshaping, integrated VCAs and cross modulations betweeen channels.
    In comparison to the Mk1 the new version is much more reliable and stable but has been improved in a number of ways and the face plate layout is more comprehendible.

    Details
    The Harvestman Double Andore--9-
    former retail price €399.16 (VAT excl.) No longer available!
  49. The Harvestman - Hertz Donut MkII

    The Hertz Donut is a dual digital oscillator. It consists of a main oscillator and a modulation oscillator. Due to internal connections FM and AM between the two oscillators is done very easily. Pushbuttons allow for different routing and tracking options and wave selection.
    Besides linear FM there is also possibility of true thru-zero FM which will expand sonic capabilities even more!

    Details
    The Harvestman Hertz Donut MK II
    former retail price €407.56 (VAT excl.) No longer available!
  50. The Harvestman - Polivoks VCG

    Harvestman´s second part of the cooperation with Mr. Vladimir Kuzmin, the inventor of the soviet vintage Polivoks synthesizer, is a sawtooth-based VCO from this machine in the Eurorack form factor.

    Details
    The Harvestman Polivoks VCG
    former retail price €222.69 (VAT excl.) No longer available!

Items 1 to 50 of 54 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Nur verfügbare anzeigen