Archive

Power adaptor plug for connecting a Curetronic module to a synthesizers.com power distribution harness.

One last in stock. Will not be re-ordered.

Power adaptor plug for connecting a Dotcom module to a Curetronic power distribution board. Additional +5V needed by some modules is not supported.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

AVAILABLE IN GERMAN LANGUAGE ONLY

This book describes all Doepfer A-100 modules that were available at the moment of publication in detail. A lot of unusual patches are presented as well.

Der cvWS is a dualer wave shaper like the one found in the core of the uLFO. The upper unit creates a sawtooth out of sruare and triangle wave, the lower unit makes sine waves. Sounds boring? Then try to FM-modulate it for interesting effects!

This LFO packed with features bases on a "triangle core" VCO and thus is on a par with any full-fledged analog VCO because the 1V/oct input allows for using it as a normal VCO. The tracking ranges a few octaves which is far from bad. There are six different waveform outputs: ramp, pulse, sine, triangle, saw, square and sine shape. All this makes the uLFO one of the most versatile LFOs no the market.

Self-oscillating 2pole state variable filter, 12dB highpass, lowpass and notch, 6dB bandpass, extra control for notch balance

Bubblesound´s VCOb is a really good, rich sounding, stable yet compact fully analog VCO. It´s circuitry is based on the uLFO but with some improvements. It tracks well 4-6 octaves (depending on how picky you are) which is good.

We have one very last unit in stock - and they won´t come again!

Sounds really nice and fuzzy from soft to hard. A bit dry and in a postive way amputated - kills the overtones a little bit and makes the distortion sounding more round - a solid little box in a pure metal case and a nice sticker on it - a beauty on its own

Runs on a 9v battery, 1/4" in and output.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

Kilpatrick´s K1600 is a duophonic MIDI/CV converter module. It converts your MIDI signals into control voltages, gates, triggers, gates

The K2579 module by Kilpatrick audio is a very complex two-part step sequencer  which can be controlled simultaneously by control voltages and MIDI data. It has a non-volatile memory for sequences and songs and allows for polyphonic or multitimbral use. Many parameters like playback direction gate length, step lenght etc can be controlled and enable rhythically interesting sequences.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

Not in production anymore. SALE of the very last unit (as long as stock lasts).

The Jellyfish is a great sounding dual digital delay with two individual delay sections. Each contains a LFO or CV inputs for modulating the delay time, separate wet and dry controls, feedback etc. Really impressive is the cross-delay function where both delays interact. In parallel mode pseudo-stereo is possible.

Sherman preist dieses außergewöhnliche Analogfilter primär bei DJs an, sicher werden hier auch zahlreiche Produzenten und Liveacts fündig: Die Eingangsstufe bringt das eingehende Signal gut auf Pegel und lässt auch heftigste Distortion zu! Der Effekt lässt sich mit dem Mix-Regler weich einblenden oder mit dem großzügigen Transform-Taster abrupt einschalten. Jedes Frequenzband (LP, BP, HP) lässt sich anteilig zum Originalsignal zumischen und mit positiver wie auch negativer Amplitudenmodulation einstellen. Zudem kann die Flankensteilheit jedes Bandes zwischen 12 und 24 dB umgeschaltet werden. Der Mastercutoff (blau) arbeitet mit den drei AM Reglern zusammen, wobei der Slavecutoff (grün) mit dem FM-Regler am besten funktioniert. Unterhalb jeden Bandes finden sich je 2 LEDs. Je nach angezeigter Farbe (blau oder grün) wirkt der Master- oder Slavecutoff am effektivsten! Die drei weißen Potis beeinflussen das Groove-Verhältnis des Filters. Auf diese Weise kann man mal eben den kompletten Groove in-sync mit dem Restyler zerfräsen und es macht grossen Spass. -Der Klang ist schön warm und fett und bietet in seinem Dynamikumfang ein ungeahntes Spektrum. Man darf gespannt sein, wie viele Clubanlagen unter der Herrschaft des RESTYLERS demnächst ihr Ende finden werden…

Entire synthesizer voice in one Eurorack module. Fat sound due to 2 VCOs and a really nice souding filter. Handbuilt in Germany.

The SSL 2260 Modulation Orgy LFO is a very special and extraordinary LFO module. It can be either synchronized to a clock or you can tap the tempo with a tap button! The rate of the LFO can be multiplied and additionally it´s waveform can be distorted.

This is not a sequencer - the name alludes to the italian word "segue" which in musical context means a smooth transition. And that's what the module does - morphing, fading but also sequentially adding sounds. use it as a quad panning module or as a simple mixer. The special feature the adjustable smoothness of the transition and two different modes!

A specialist for complex modulations – Quadrangle is composed of four envelopes with AD, AR and loop mode.  All attack and decay respectively release parameters can not only be adjusted via knobs, but are voltage controllable as well. Fast attack times lead to a snappy, percussive behavior. While in loop mode, the envelopes can go up into the audio range. Bipolar attenuators allow users to level and / or invert CV signals generated by the circuits. Via trigger outputs, it is possible to daisy-chain several channels to form a multistage envelope or a complex LFO.

Warning, high voltages! – Super Power Blue is the most beefy power supply currently available from Synthrotek. The module is not an updated version of an old circuit, but was developed from scratch. Besides raw power, it is also focused on safety. Thanks to two types of connectors, Blue can be used with Flying Bus Cables as well as Noise Canceling Distribution Boards. A USB port allows the connection of a MIDI controller or gooseneck lamp.