Archive

Power adaptor plug for connecting a Curetronic module to a synthesizers.com power distribution harness.

One last in stock. Will not be re-ordered.

Power adaptor plug for connecting a Dotcom module to a Curetronic power distribution board. Additional +5V needed by some modules is not supported.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

AVAILABLE IN GERMAN LANGUAGE ONLY

This book describes all Doepfer A-100 modules that were available at the moment of publication in detail. A lot of unusual patches are presented as well.

Set of two wooden side panels for mounting two 140mm deep Erica Eurorack cases in a L-shaped manner.

A set of two 6U rack ears for the Eurorack cases of Erica Synths

Solid power supply for the Skiff by Erica Synths. It works with a proper toroidal transformer, bringing a little more weight on the scale but that shouldn't matter in the studio.

The biggest of the three external power supplies for Erica's Skiff provides 2.5A, which is enough current for two cases. It also has two power connectors - so if you plan to use two Skiffs sooner or later, go for this one to prevent having two supplies in the studio.

Spare wooden side panels for one Skiff by Erica Synths.

One last unit in stock.

Creative eight step pulse sequencer with random and one-shot modes and adjustable loop cycle length, number of repeats and step length. The module can be coupled with other Algorhythms to create longer patterns or to cross-influence the sequencers which can be interesting for polyrhythmics or odd time signatures.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

The Missing Link by Jabrudian Industries is a handy small device which converts OSC data into MIDI. In practical use this means that you can control your synthesizers wireless via an iPad or similar touch devices with Apps like TouchOSC.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

The braided Nazca patchcords combine flexibility with pleasant surface feel, having a nice arc retention due to their thickness.
The pack of eighteen contains each nine cables in 33cm and 60cm, with two colors per length.

Not in production aymore.

The ADSR module by Pittsburgh Modular is a classic envelope generator with four parameters: attack, decay, sustain and release.

The Pittsburgh Modular Analog Delay is an analog delay module designed around a pair of 4096 Bucket Brigade Delay Line (BBD) ICs to produce a distinct analog delay effect. The maximum delay time when shipped is set at 9/10ths of a second.

The Analog Replicator is a new module built from scratch, way better than the old "Analog Delay" module. With up to 8192 bucket-stages and two time ranges delays from 12ms to 2.6s are possible. Everything from short flangings over dense feedback to thrashy long delays is possible. Invertable feedback, voltage control of three parameters, bypass and a neat spillover function put the cherry on top.

not in production anymore

The Bender is not an alcoholized cleptomaniac bending robot but a dual voltage controlled LFO with crossmodulation, providing for crazy modulations.

Not in production aynmore.

Small, expandable and inexpensive housing for Eurorack modules, it has an integrated power solution (550mA) and offers 48HP module space.

The [Cell48] System 1 is Pittsburgh Modular´s perfect entry to analog modular synthesis: a really nice sounding analog synthesizer with MIDI.
In a nice compact box you find a selection of modules: a semimodular synthesizer voice, a mixer/multiples, a duophonic MIDI/CV interface and an audio outputs / headphone amp. the semi-modular structure and internal normalizations make it possible to use the system without a single patch cable - ideal for beginners!

Powerful 8Bit digital oscillator and signal proessor. The module consists of two oscillators (one master, one slave) and a wave shaper. Each VCO has 16 wave forms; you can blend between both VCOs. The mix output carries the mix of the two oscillators which is treated by the processor - both waves can be combined in 1 of 16 ways.

A pair of wooden side cheeks for beautifying either the Cell [48] or Cell [90] cases and at the same time to connect two of them for a two-row cabinet.

High quality dual linear VCA with mixing function.