-
Analogue Systems / Cliff - 15cm patchcables (5-Pack)
Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.
Detailsformer retail price €10.92 (VAT excl.) No longer available! -
former retail price €142.02 (VAT excl.) No longer available!
-
Analogue Systems RS-240 Bode Freq Shifter
Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)
Detailsformer retail price €1,350.00 (VAT excl.) No longer available! -
Andreas Krebs - Das große Buch zum A-100
AVAILABLE IN GERMAN LANGUAGE ONLY
This book describes all Doepfer A-100 modules that were available at the moment of publication in detail. A lot of unusual patches are presented as well.
Detailsformer retail price €27.94 (VAT excl.) No longer available! -
Dirty Electronics MUTE Synth
Special price only as stock (of last 4 units) lasts.
The Mute Synth by Dirty Electronics is an inexpensive hand-held touch and tilt instrument with copper etched artwork and contoured printed circuit board that was designed in collaboration with the legendary record label MUTE.
A must for all MUTE fans and a perfect gift!
Detailsformer retail price €63.03 (VAT excl.) No longer available! -
Eowave 2D G-force controller
A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.
Item for use and in combination with EoBody2 interface.
Detailsformer retail price €62.18 (VAT excl.) No longer available! -
Eowave 3D G force controller WIRELESS
A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.
artikel for use and in combination with the WIRELESS EoBody interface.
Detailsformer retail price €79.83 (VAT excl.) No longer available! -
EoWave Domino
The EoWave Domino is a compact monophonic analog synthesizer with discrete circuitry for an affordable price.
Highlights are the eight-step sequencer and the arpeggiator.
Detailsformer retail price €234.45 (VAT excl.) No longer available! -
Eowave EoMono
EoMono, the little brother of the EoBody2 is the first USB plugandplay sensor interface of this kind. It gives you connection for one sensor. This way you can start with sensor applications easily and for a small price. Just control your software´s parameter assigned by yourself with a desired sensor.
Eowave Eomono is compatible with all MIDI softwares! No additional MIDI interface is needed.
Detailsformer retail price €46.22 (VAT excl.) No longer available! -
eowave MAGMA
The last unit for a super low special price!
The MAGMA, which was called Koma in its prototype stadium, is an analog bassline synthesizer with integrated sequencers, memory and a Roland type low pass filter.
Detailsformer retail price €545.38 (VAT excl.) No longer available! -
Eowave movement controller
A movement tilt switch. This movement sensor will not detect accelerations but x,y position.
artikel for use and in combination with EoBody2 interface.
Detailsformer retail price €15.97 (VAT excl.) No longer available! -
Eowave position ribbon sensor 10 cm
This 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters. These 10 cm ribbon are also perfect to emulate faders. artikel for use and in combination with EoBody2 interface.
Detailsformer retail price €41.18 (VAT excl.) No longer available! -
EoWave Ribbon Synth
The EoWave Ribbon is not only a ribbon controller but also a standalone instrument. It contains a digital LoFi-synth with one VCO and frequency modulation.
Details
Besides of that the unit can be used as a controller both for USB-MIDI and control voltages!former retail price €192.44 (VAT excl.) No longer available! -
Eowave shock sensor (piezo)
This sensor is a shock-sensitive pad, a piezo. Ideal for drums and percussive sensoring. Unit for use and in combination with EoBody2 interface.
Detailsformer retail price €41.18 (VAT excl.) No longer available! -
Eowave switch sensor
50% discount on all remaining EoWave sensors, only as stock lasts (read: as long as delivery status is "immediately available")
A momentary touch switch (temporary, reacting to "on" as long as you press the button) compatible with eobody1 and eobody2 USB8 SensorBox.
artikel for use and in combination with EoBody2 interface.
Detailsformer retail price €15.97 (VAT excl.) No longer available! -
Eowave temperatur sensor
A temperature sensor reacting on changes of cold and warm compatible with all eobody converters. artikel for use and in combination with EoBody2 interface.
Detailsformer retail price €15.97 (VAT excl.) No longer available! -
Innerclock Systems - SyncGen2 LS (Eurorack)
Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
Details
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!former retail price €495.80 (VAT excl.) No longer available! -
Innerclock Systems Sync-Shift MkIII
Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.
Detailsformer retail price €394.12 (VAT excl.) No longer available! -
Innerclock Systems SyncGen2 PRO
The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.
Detailsformer retail price €533.61 (VAT excl.) No longer available! -
Jabrudian Industries - The Missing Link
The Missing Link by Jabrudian Industries is a handy small device which converts OSC data into MIDI. In practical use this means that you can control your synthesizers wireless via an iPad or similar touch devices with Apps like TouchOSC.
Detailsformer retail price €138.66 (VAT excl.) No longer available! -
Microbe Modular - Meta Sequencer
Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.
Detailsformer retail price €158.82 (VAT excl.) No longer available! -
former retail price €138.66 (VAT excl.) No longer available!
-
MIDI Solutions Dual Footswitch Controller
With a double footswitch or switch triggers you can generate Midi signals of any kind. The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.
Detailsformer retail price €142.02 (VAT excl.) No longer available! -
MIDI Solutions Event Processor
Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.
Detailsformer retail price €125.21 (VAT excl.) No longer available! -
MIDI Solutions F8
Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.
Detailsformer retail price €276.47 (VAT excl.) No longer available! -
MIDI Solutions Footswitch Controller
This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.
Detailsformer retail price €125.21 (VAT excl.) No longer available! -
MIDI Solutions M8
Phase-out model. Sales only as long as stock lasts
This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.
Detailsformer retail price €234.45 (VAT excl.) No longer available! -
MIDI Solutions Merger
The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.
Detailsformer retail price €66.39 (VAT excl.) No longer available! -
MIDI Solutions Power Adapter
Phase-out model. Sales only as long as stock lasts
The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.
Detailsformer retail price €57.98 (VAT excl.) No longer available! -
MIDI Solutions Programmable Input Selector
Special product. Will be ordered only on request. Delivery time 3-4 weeks.
The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.
Detailsformer retail price €138.66 (VAT excl.) No longer available! -
MIDI Solutions Quadra Merge
The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.
Detailsformer retail price €108.40 (VAT excl.) No longer available! -
MIDI Solutions Quadra Thru
If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.
Detailsformer retail price €49.58 (VAT excl.) No longer available! -
MIDI Solutions Relay
The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.
Detailsformer retail price €125.21 (VAT excl.) No longer available! -
MIDI Solutions Router
The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.
Detailsformer retail price €125.21 (VAT excl.) No longer available! -
MIDI Solutions T8
If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.
Detailsformer retail price €167.23 (VAT excl.) No longer available! -
MIDI Solutions Thru
If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.
Detailsformer retail price €41.18 (VAT excl.) No longer available! -
MIDI Solutions Velocity Converter
Phase-out model. Sales only as long as stock lasts
This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.
Detailsformer retail price €125.21 (VAT excl.) No longer available! -
Midisolutions Breathcontroller
The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.
Attention: Yamaha doesn´t manufacture the breath controllers anymore!
Detailsformer retail price €167.23 (VAT excl.) No longer available! -
Midisolutions Eventprocessor / plus
phase out model. Sales only as long as stock lasts.
The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!
Detailsformer retail price €158.82 (VAT excl.) No longer available! -
Midisolutions pedal-to-midi-converter
To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.
Detailsformer retail price €125.21 (VAT excl.) No longer available! -
Plankton Electronics - The Jellyfish desktop
Not in production anymore. SALE of the very last unit (as long as stock lasts).
The Jellyfish is a great sounding dual digital delay with two individual delay sections. Each contains a LFO or CV inputs for modulating the delay time, separate wet and dry controls, feedback etc. Really impressive is the cross-delay function where both delays interact. In parallel mode pseudo-stereo is possible.
Detailsformer retail price €243.70 (VAT excl.) No longer available! -
Sequentix Cirklon Cheeks Apple
With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!
Detailsformer retail price €71.43 (VAT excl.) No longer available! -
Sequentix Cirklon Cheeks Bright Walnut
With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!
Detailsformer retail price €71.43 (VAT excl.) No longer available! -
Sequentix Cirklon Cheeks Wenge (inkl. Schrauben + Schraubendreher)
With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!
Detailsformer retail price €71.43 (VAT excl.) No longer available! -
Sequentix Cirklon Cheeks Yew
With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!
Detailsformer retail price €71.43 (VAT excl.) No longer available! -
Sequentix Cirklon Cheeks Zebra
With these wooden side panels, users can enhance the look of their Cirklon sequencer. – A feast for the eyes!
Detailsformer retail price €71.43 (VAT excl.) No longer available! -
Seven Woods Audio - Space Station SST-206 (v3)
After years it´s available again with just a few more units: the Ursa Major Space Station SST-206! A high-quality 24Bit DSP emulates the echo and reverb effects of the legendary Space Station from 1977 but also fetures a new algorithm called "room". The whole machine is housed in a flat case that looks like it´s own remote control.
No MIDI, no displays, no umpteen presets - just a few parameters and a great sound.
Detailsformer retail price €1,168.07 (VAT excl.) No longer available! -
Sputnik Modular - CV Processor
Phase-out module. Maximum one last in stock. Sales only as long as stock lasts.
The CV professor attenuates, crossfades and sums signals. And on two independent channels he can amplify signals up to the factor 2.
Detailsformer retail price €147.06 (VAT excl.) No longer available! -
Sputnik Modular - Selector
Phase-out module. Few in stock. Sales only as long as stock lasts.
In a different way than other Sequential Switch modules the Selector not only switches forwards thru the inputs but alos backwards or in a random fashion. Then it has an inverted output and a step count limiter, but it does not work bi-directionally. Read: It is an "4 In / 1 Out" switch and it's not possible to use swap inputs and outputs.
Detailsformer retail price €121.85 (VAT excl.) No longer available!