Archive

Sherman preist dieses außergewöhnliche Analogfilter primär bei DJs an, sicher werden hier auch zahlreiche Produzenten und Liveacts fündig: Die Eingangsstufe bringt das eingehende Signal gut auf Pegel und lässt auch heftigste Distortion zu! Der Effekt lässt sich mit dem Mix-Regler weich einblenden oder mit dem großzügigen Transform-Taster abrupt einschalten. Jedes Frequenzband (LP, BP, HP) lässt sich anteilig zum Originalsignal zumischen und mit positiver wie auch negativer Amplitudenmodulation einstellen. Zudem kann die Flankensteilheit jedes Bandes zwischen 12 und 24 dB umgeschaltet werden. Der Mastercutoff (blau) arbeitet mit den drei AM Reglern zusammen, wobei der Slavecutoff (grün) mit dem FM-Regler am besten funktioniert. Unterhalb jeden Bandes finden sich je 2 LEDs. Je nach angezeigter Farbe (blau oder grün) wirkt der Master- oder Slavecutoff am effektivsten! Die drei weißen Potis beeinflussen das Groove-Verhältnis des Filters. Auf diese Weise kann man mal eben den kompletten Groove in-sync mit dem Restyler zerfräsen und es macht grossen Spass. -Der Klang ist schön warm und fett und bietet in seinem Dynamikumfang ein ungeahntes Spektrum. Man darf gespannt sein, wie viele Clubanlagen unter der Herrschaft des RESTYLERS demnächst ihr Ende finden werden…

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

The MIDI Delay is a high accuracy programmable MIDI delay.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The Mk2 version of the analog sequencer MFB URZWERG PRO now has a nice, stable, black anodized housing with wooden side panels. Technically it´s the same unit as the original Urzwerg Pro.

Es kommt nicht immer auf die Größe an. Der NANOZWERG ist trotz seiner überaus kompakten Abmessungen ein vollwertiger, monofoner Analogsynthesizer. Mit seinem VCO und Suboszillator sowie einem 12-dB-Multimodefilter kann der NANOZWERG vielfältige Bass- und Leadsounds erzeugen. Darüber hinaus lässt sich der NANOZWERG mit seinem Rauschgenerator und über einen externen Audioeingang auch als Effektprozessor einsetzen.

The sequencer module SEQ-02 offer twelve tracks for programming trigger sequences and/or CV sequences.

Besides triggering drum modules by MFB and other manufacturers you might as well trigger all modules that accept trigger and gate signals like envelopes, sequencers, SandHs and so on. Furthermore the SEQ-02 can output CVs for sequencing variable parameters.

Discontinued model, only few left. Sales only as long as sales last.

The module SEQ-1 is a trigger sequencer with 12 tracks and the classic chasing light programming of the Roland TR-series: choose an instrument, set the steps, ready and on to the next one. The 12 trigger outputs don´t have to be used for trighgering drums only, you might as well rhythmically trigger envelopes, Sample&Holds, clock dividers, switches.

With the OSC-02 MFB offers now also a real analog Oszillator. Like the OSC-01 there are three independent Oszillators under the frontplate. They can be controlled via the same CV 1 or with one CV each. Furthermore the module is equiped with an digital ringmodulator. For each oszillator there is one switch for choosing the waveform.

Now MFB offers the Bass Drum of the MFB503 as module for the Euro Rack.

Out of production

The Drum-08 Clap is an analog, voltage controlled clap sound generator. Due to the two audio outputs you can use it in stereo, too.

Discontinued model, only few left. Sales only as long as sales last.

Analog tom tom module with the sound of the toms from MFB´s own 503 drum computer. Just like on the 503 several parameters can be edited, like tune, pitch, decay and additionally noise.

Analog snare drum module. The circuitry is from the snare drum of MFBs 503 drum computer but it has been modified and extended with CV inputs for controlling parameters.

The mk2 version is technically identical to the old version but it comes in a nice looking, black anodized metal housing with wooden sides.

The Microzwerg not only bridges the gap between Nanozwerg and Kraftzwerg. Due to its dual multimode-filter, it also offers an individual signal-path with specific sound potential. Microzewrg?s numerous patch connections are perfect for interfacing with other analog synthesizers or sequencers.

In comparison to it´s older brother the Kraftzwerg II has a much improved filter, temperature control at the VCOs and a nice new housing from alu and wood. The rest of it´s concept remains unchanged: a semi-modular analog synthesizer with 3 oscillators, 2 LFOs, 2 ADSRs, CV control and MIDI.

The Dominion X is MFB´s start into a new class of instruments that have a nice stable metal housing with wooden cheeks but in first place have new interesting features. The Dominion X combines analog synthesis with memory as well as patch points for interfacing with CV gear like modular systems. Three oscillators, a new multimode filter and extensive modulation possibilities for the individual oscillators, the filter and the VCA that can be assigned and set easily by rotary switches and coltrols. All this make the Dominion a flexible analog synthesizer.

In addition to the multimode filter the SED version features a great sounding Roland type low pass filter that can be overdriven.

The Dominion X is MFB´s start into a new class of instruments that have a nice stable metal housing with wooden cheeks but in first place have new interesting features. The Dominion X combines analog synthesis with memory as well as patch points for interfacing with CV gear like modular systems. Three oscillators, a new multimode filter and extensive modulation possibilities for the individual oscillators, the filter and the VCA that can be assigned and set easily by rotary switches and coltrols. All this make the Dominion a flexible analog synthesizer.

Not in production anymore

Although being the smallest 808 clone, the MFB 522 is also one of the best currently on the market. The tiny controls for the many parameters take some time getting used to, but as far as sound is concerned the unit is truly brilliant. Bassdrum, Clap and Toms/Conga can be programmed in two or three variations per pattern.  Finally the price makes this unit a no-brainer.

A -24dB per octave steep cascade Moog-style lowpass filter with additional voltage control of resonance.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

State variable multi-mode filter with optical components (vactrols) that provide for a good sound. Three filter types are available and you can blend between them. Voltage control of cutoff, resonance and mix.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The RH-301 synchronises analog clock, MIDI clock and DIN Sync by a tap- and sync-able tempo generator with additional syncable LFO and an envelope generator. A great master clock synchronizer mega utility unit and the first of it´s kind!

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Poltergeist, being an entirely voltage controllable quadrophonix mixer is a very extraordinary and unique module you can mix and control signals quadraphonically with complete control and beyond. Four channels each with it’s own VCA, plus a stereo auxiliary input, are mixed out to four separate outputs enabling the user to manipulate signals both stereophonically and quadraphonically in entirely new and ghostly ways.
With not less than 48 analog SSM-VCAs it's a very laborious module KOMA needed a lot of brain juice and patience for.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

Powerful step sequencer built around four really properly well-equipped full-featured 16-step sequencers communicating via both MIDI and CV/Gate. There are no screens or submenus - all features have their own dedicated controls and have their own dedicated in- and outputs on the large 87-point patch bay. Lastly a seven bank CV Recorder is on board and can output up to 5 banks at once!
The Komplex Sequencer opens up a whole new world of creative possibilities and starts where other sequencers have stopped, for instance when it comes to crossmodulations or patching the sequencers crosswise. Very experimental and not only fine in the studio but also on stage.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The Kommander by KOMA Elektronik is a dual X/Y infrared motion controller for your modular system. Simply connect it to CV and gate inputs, move your hand (foot or what have you) above it and generate modulations by gestures.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The medium sized Kabelhänger kills two birds with one stone :
Another 2HP gap in your system is filled and your, now well-organized, cables hang around like a relaxed sloth.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The FT-201 by KOMA Elektronik is an unique, innovative filter stompbox effect with an internal 10-step sequencer. In addition it can be controlled by an infrared motion sensor and thus be played gestically!

Please order directly with KOMA Elektronik https://koma-elektronik.com/

The BD101 by KOMA Elektronik is a very special analog delay which differs completely from conventional analog delay pedals, soundwise but also featurewise. It allows for sick, chopped sounds that can resemble a bit crusher. You can easily and quickly blend from thick, long delays to extremely short pulses.
Inputs and outputs for control voltages make it possible to combine the BD101 with other (KOMA-) pedals but of course also with a modular synthesizer! An infrared motion sensor allows for gestical control of parameters.

Please order directly with KOMA Elektronik https://koma-elektronik.com/

External 9V DC power supply, BOSS-style. Can be used with all Koma Elektronik products. Polarity is like those of guitar effects pedals: center negative, ring positive.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

The Grenadier is a enthralling, semi-modular analog synthesizer with an uncommon sequencer, a keypad, a drone mode and crossmodulation between VCO and the resonant formant filter.
External control is possible by CV and Gate signals only which is the reason why the Grenadier has several 3.5mm sockets.