Archive

Four-storied wooden cabinet made of finest walnut wood, intended for mounting 3U modules by Analogue Systems. It provides as power supply and a "trink line". Each of the RS8000's four rows offers 84HP space for modules.

The Sorceror is the ideal solution for a keyboard-based medium-sized modular system as its beautiful walnut case houses both a 49-key keyboard as well as a cabinet for modules.
The keyboard in the bottom half features MIDI, CV plus elaborate keyboard and wheel controls, while the upper part is a cabinet with 168HP space for modules. Pretty much like a Demon keyboard with an Apprentice cabinet on top combined in one unit.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

The Analog Memory is an expansion module for the Pressure Points. It adds five more rows of each four steps of CVs to the Pressure Point.

The DIN Power is a simple and inexpensive solution for distributing power in an external case for eurorack modules.
It uses the power distribution systems of an already existing modular system and sends it to an external case. It is very suitable for building a flat controller case with modules like René, Pressure Points, joystick modules and other haptical controllers.

The Format Jumbler is an adaptor module which converts between 3,5mm (1/8")jacks, 6.3mm (1/4") jacks and banana plugs. Additionally you can use the module as a multiples.

Vactrol multimode filter, based on the core of the discoontinued QMMG. It masters a number of sounds, from resonant acid squelch to percussive lowpass-gate sounds like Buchla bongos you an create simultaneously.

Entire modular system with nine modules from Make Noise. It integrates sound generators, lopass gates, effects, modulation generatros, a haptic controller and a sequencer.
The unique CV-Bus is designed for convenient distribution of CV signals and adds a pre-amp plus stereo output section.
The Shared System can be expanded by further modules as 48HP are non-occupied.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

Phase-out model. Sales only as long as stock lasts

This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

Phase-out model. Sales only as long as stock lasts

The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

Special product. Will be ordered only on request. Delivery time 3-4 weeks.

The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

Phase-out model. Sales only as long as stock lasts

This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

Attention: Yamaha doesn´t manufacture the breath controllers anymore!

phase out model. Sales only as long as stock lasts.

The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

The s0 is two in one: first a 16Bit sample player with three loop modes and variable sample start and loop point parameters. It reads .wav files from an SD card. Number two is a granular synthesis-based looper with audio input, various loop and trigger modes and reset/PLL-synchronization up to audio ranges.

Nebulæ is an audio sample player or granular oscillator in the Eurorack modular synthesizer format. It uses sound files as the source material for creating loops, melodies, granular clouds, drones, pads and otherworldy textures. It is also capable of acting as a classic keyboard style MIDI sampler/drum sequencer while in one-shot mode.

Version with silver front panel.

Sherman preist dieses außergewöhnliche Analogfilter primär bei DJs an, sicher werden hier auch zahlreiche Produzenten und Liveacts fündig: Die Eingangsstufe bringt das eingehende Signal gut auf Pegel und lässt auch heftigste Distortion zu! Der Effekt lässt sich mit dem Mix-Regler weich einblenden oder mit dem großzügigen Transform-Taster abrupt einschalten. Jedes Frequenzband (LP, BP, HP) lässt sich anteilig zum Originalsignal zumischen und mit positiver wie auch negativer Amplitudenmodulation einstellen. Zudem kann die Flankensteilheit jedes Bandes zwischen 12 und 24 dB umgeschaltet werden. Der Mastercutoff (blau) arbeitet mit den drei AM Reglern zusammen, wobei der Slavecutoff (grün) mit dem FM-Regler am besten funktioniert. Unterhalb jeden Bandes finden sich je 2 LEDs. Je nach angezeigter Farbe (blau oder grün) wirkt der Master- oder Slavecutoff am effektivsten! Die drei weißen Potis beeinflussen das Groove-Verhältnis des Filters. Auf diese Weise kann man mal eben den kompletten Groove in-sync mit dem Restyler zerfräsen und es macht grossen Spass. -Der Klang ist schön warm und fett und bietet in seinem Dynamikumfang ein ungeahntes Spektrum. Man darf gespannt sein, wie viele Clubanlagen unter der Herrschaft des RESTYLERS demnächst ihr Ende finden werden…