Items 1 to 50 of 61 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Nur verfügbare anzeigen
  1. Analogue Systems / Cliff - 15cm patchcables (5-Pack)

    Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

    Details
    /
    former retail price €10.92 (VAT excl.) No longer available!
  2. Analogue Systems RS-190 VU-Meter / Inverter

    RS-190 is out of production

    The RS-190 combines a real analog VU meter with an inverter

    Details
    Analogue Systems RS-190  VU-Meter / Inverter Modul
    former retail price €142.02 (VAT excl.) No longer available!
  3. Analogue Systems RS-240 Bode Freq Shifter

    Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

    Details
    Analogue Systems RS-240 Bode Freq Shifter--9-
    former retail price €1,350.00 (VAT excl.) No longer available!
  4. Andreas Krebs - Das große Buch zum A-100

    AVAILABLE IN GERMAN LANGUAGE ONLY

    This book describes all Doepfer A-100 modules that were available at the moment of publication in detail. A lot of unusual patches are presented as well.

    Details
    Andreas Krebs - Das große Buch zum A-100--9-
    former retail price €27.94 (VAT excl.) No longer available!
  5. Brandon Smith´s Piston Honda ROMs

    Brandon Smith's set of 4 EPROMS with sound banks for the Piston Honda.
    You can exchange the pre-installed ROM chips with other ones to get new sounds and wavetables. To install all four Eeproms simultaneously you need a Harvestman ROM expander for the Piston Honda which will give you the possiblitly to have six eeproms installed in your module.

    Details
    The Harvestman Piston Honda ROM from B. Smith
    former retail price €33.61 (VAT excl.) No longer available!
  6. Eowave 2D G-force controller

    A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

    Item for use and in combination with EoBody2 interface.

    Details
    Eowave 2D G-force controller--9-
    former retail price €62.18 (VAT excl.) No longer available!
  7. Eowave 3D G force controller WIRELESS

    A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

    artikel for use and in combination with the WIRELESS EoBody interface.

    Details
    Eowave 3D G force controller WIRELESS
    former retail price €79.83 (VAT excl.) No longer available!
  8. EoWave Domino

    The EoWave Domino is a compact monophonic analog synthesizer with discrete circuitry for an affordable price.

    Highlights are the eight-step sequencer and the arpeggiator.

    Details
    EoWave Domino
    former retail price €234.45 (VAT excl.) No longer available!
  9. Eowave EoMono

    EoMono, the little brother of the EoBody2 is the first USB plugandplay sensor interface of this kind. It gives  you connection for one sensor. This way you can start with sensor applications easily and for a small price. Just control your software´s parameter assigned by yourself with a desired sensor.

    Eowave Eomono is compatible with all MIDI softwares! No additional MIDI interface is needed.

    Details
    Eowave EOmono
    former retail price €46.22 (VAT excl.) No longer available!
  10. eowave MAGMA

    The last unit for a super low special price!

    The MAGMA, which was called Koma in its prototype stadium, is an analog bassline synthesizer with integrated sequencers, memory and a Roland type low pass filter.

    Details
    EoWave Magma synthesizer--9-
    former retail price €545.38 (VAT excl.) No longer available!
  11. Eowave movement controller

    A movement tilt switch. This movement sensor will not detect accelerations but x,y position.

    artikel for use and in combination with EoBody2 interface.

    Details
    Eowave movement controller--9-
    former retail price €15.97 (VAT excl.) No longer available!
  12. Eowave position ribbon sensor 10 cm

    This 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters. These 10 cm ribbon are also perfect to emulate faders. artikel for use and in combination with EoBody2 interface.

    Details
    Eowave position ribbon sensor 10 cm--9-
    former retail price €41.18 (VAT excl.) No longer available!
  13. EoWave Ribbon Synth

    The EoWave Ribbon is not only a ribbon controller but also a standalone instrument. It contains a digital LoFi-synth with one VCO and frequency modulation.
    Besides of that the unit can be used as a controller both for USB-MIDI and control voltages!

    Details
    EoWave Ribbon Synth--9-
    former retail price €192.44 (VAT excl.) No longer available!
  14. Eowave shock sensor (piezo)

    This sensor is a shock-sensitive pad, a piezo. Ideal for drums and percussive sensoring. Unit for use and in combination with EoBody2 interface.

    Details
    Eowave shock sensor (piezo)--9-
    former retail price €41.18 (VAT excl.) No longer available!
  15. Eowave switch sensor

    50% discount on all remaining EoWave sensors, only as stock lasts (read: as long as delivery status is "immediately available")

    A momentary touch switch (temporary, reacting to "on" as long as you press the button) compatible with eobody1 and eobody2 USB8 SensorBox.

    artikel for use and in combination with EoBody2 interface.

    Details
    Eowave switch sensor--9-
    former retail price €15.97 (VAT excl.) No longer available!
  16. Eowave temperatur sensor

    A temperature sensor reacting on changes of cold and warm compatible with all eobody converters. artikel for use and in combination with EoBody2 interface.

    Details
    Eowave temperatur sensor--9-
    former retail price €15.97 (VAT excl.) No longer available!
  17. Innerclock Systems - SyncGen2 LS (Eurorack)

    Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
    The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

    Details
    Innerclock Systems SyncGen2 LS module
    former retail price €495.80 (VAT excl.) No longer available!
  18. Innerclock Systems Sync-Shift MkIII

    Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

    Details
    Innerclock Systems Sync Shift Mk3
    former retail price €394.12 (VAT excl.) No longer available!
  19. Innerclock Systems SyncGen2 PRO

    The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

    Details
    Innerclock Systems SyncGen2 PRO--9-
    former retail price €533.61 (VAT excl.) No longer available!
  20. Livewire - Audio Frequency Generator

    The Audio Frequency Generator (AFG) is probably the most comprehensive VCO for the 3U modular system in Eurorack form factor. It is a massive and great VCO with partly totally new features like the complex "harmonic animation" section. It provides an enormous variety of waveforms and timbres and allows extensive modulations with knobs and CVs. The AFG even has its own sub-oscillator and also does linear FM. The Livewire Audio Frequency Generator is designed with expandability in mind and there will be modules which are intended to further expand upon the AFG?s sound shaping capabilities.

    Details
    Livewire AFG--9-
    former retail price €410.92 (VAT excl.) No longer available!
  21. Livewire - Chaos Computer

    The long-awaited Chaos Computer is an eight-channel Random Voltage Source producing stepped voltages depending on clocks. It features an X-axis and one Y-axis random generator with 4 outputs each that are driven by different mathematical distribution probabilities.The supercool LED display adds to it´s character

    Details
    Livewire Chaos Computer--9-
    former retail price €503.36 (VAT excl.) No longer available!
  22. Livewire - Dalek Modulator

    Ein Zwitter aus schräger Klangquelle und agressivem Modulator ist der Dalek als Kombimodul aus zwei linearen Oszillatoren nebst Ringmodulator. Carrier und Modulator im Ringmod sind von den beiden Oszillatoren gespeist sofern diese nicht durch externe Signale bespielt werden. Die VCOs können natürlich auch entsprechend unabhängig verwendet werden.

    Details
    Livewire Dalek Modulator--9-
    former retail price €217.65 (VAT excl.) No longer available!
  23. Livewire - Dual Bissell Generator

    The Dual Bissell Generator is a dual slew limiter module which is based on an unique schematic by Herry Bissell jr.

    Details
    Livewire Dual Bissell Generator--9-
    former retail price €150.42 (VAT excl.) No longer available!
  24. Livewire - Vulcan Modulator

    The Vulcan Modulator is a flexible generator of control voltages. It comprises of two voltage controlled LFOs which can modulate each other. Four further devices compare the LFO´s signals and can output a CV on their own. A perfect modulation source for all of you who are bored by normal LFOs.

    Details
    Livewire Vulcan Modulator--9-
    former retail price €200.84 (VAT excl.) No longer available!
  25. Malekko Richter Mega-Wave

    The Richter Mega-Wave is a wavetable lookup module for processing and distorting signals by 8Bit wave tables. It contains wave forms of the original Wiard Mini-Wave.

    Details
    Malekko Richter Mega-Wave
    former retail price €289.92 (VAT excl.) No longer available!
  26. Malekko - Wiard Boogie filter

    The Malekko Wiard Boogie Filter is a lowpass filter and the offical licenced Version of the 1212A Wiard Module.
    Just like the Borg the Boogie Filter also has an vactrol based cicuit. It has four different slope outputs: -6db, -12dB, -18dB and -24dB per octave.

    Details
    Malekko  Wiard Boogie filter--9-
    former retail price €209.24 (VAT excl.) No longer available!
  27. Malekko - Wiard Borg 1 (white)

    Out of production.

    The Borg Filter – A hybrid of Buchlas Lowpass Gate 292 und and the high-/lowpass filter of the Korg MS 20 (but without individual controls for resonance and cutoff) is a very interesting and aggressive filter which can be used as a VCA as well.

    Differences between Borg1 and Borg2:
    The Borg 1 has white knobs. It is the as the original blue Wiard 300 series 6U module. It is softer in sound and more percussive, has a longer decay time [by x10] and a more mellow hollow tone. It sounds rather like a classic lopass gate.

    Details
    /
    former retail price €205.88 (VAT excl.) No longer available!
  28. Malekko Fade

    Voltage controlled crossfade module with vactrol-based, voltage controlled level

    Details
    Malekko  Fade--9-
    former retail price €105.04 (VAT excl.) No longer available!
  29. Malekko Switch

    Dual A/B switch module with a common gate switch input and a pushbutton for manual switching,

    3U Eurorack module. module width 4HP

    Details
    Malekko Switch
    former retail price €74.79 (VAT excl.) No longer available!
  30. Malekko Wiard XMIX

    The XMIX module is versatile mixer module which you can use as a voltage controlled crossfader or a VCA.
    The module is another cooperation between Malekko and Grant Richter from Wiard.

    Details
    Malekko  Wiard XMIX--9-
    former retail price €142.02 (VAT excl.) No longer available!
  31. Microbe Modular - Meta Sequencer

    Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

    Details
    DinSync MODSEQ--1-
    former retail price €158.82 (VAT excl.) No longer available!
  32. MIDI Solutions - MIDI Delay

    The MIDI Delay is a high accuracy programmable MIDI delay.

    Details
    MIDI Solutions MIDI Delay--9-
    former retail price €138.66 (VAT excl.) No longer available!
  33. MIDI Solutions Dual Footswitch Controller

    With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

    Details
    MIDI Solutions Dual Footswitch Controller--9-
    former retail price €142.02 (VAT excl.) No longer available!
  34. MIDI Solutions Event Processor

    Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

    Details
    MIDI Solutions Event Processor--9-
    former retail price €125.21 (VAT excl.) No longer available!
  35. MIDI Solutions F8

    Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.

    Details
    MIDI Solutions F8--9-
    former retail price €276.47 (VAT excl.) No longer available!
  36. MIDI Solutions Footswitch Controller

    This tiny Controller can be used to generate MIDI messages and MIDI functions with a simple footswitch.

    Details
    MIDI Solutions Footswitch Controller--9-
    former retail price €125.21 (VAT excl.) No longer available!
  37. MIDI Solutions M8

    Phase-out model. Sales only as long as stock lasts

    This 19" unit merges all messages appearing at each of its 8 MIDI inputs to its MIDI output. No programming nessesary.

    Details
    MIDI Solutions M8--9-
    former retail price €234.45 (VAT excl.) No longer available!
  38. MIDI Solutions Merger

    The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

    Details
    MIDI Solutions Merger--9-
    former retail price €66.39 (VAT excl.) No longer available!
  39. MIDI Solutions Power Adapter

    Phase-out model. Sales only as long as stock lasts

    The Power Adapter provides power to MIDI machines in instances where it is not available, and can also be used to send MIDI over long distances.

    Details
    MIDI Solutions Power Adapter--9-
    former retail price €57.98 (VAT excl.) No longer available!
  40. MIDI Solutions Programmable Input Selector

    Special product. Will be ordered only on request. Delivery time 3-4 weeks.

    The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output.

    Details
    MIDI Solutions Programmable Input Selector--9-
    former retail price €138.66 (VAT excl.) No longer available!
  41. MIDI Solutions Quadra Merge

    The Quadra Merge merges all messages appearing at each of its 4 MIDI inputs to its MIDI output.

    Details
    MIDI Solutions Quadra Merge--9-
    former retail price €108.40 (VAT excl.) No longer available!
  42. MIDI Solutions Quadra Thru

    If more Midi outputs are needed, this useful tool provides 4 MIDI outputs from a single MIDI input. The power is taken over the Midi-In.

    Details
    MIDI Solutions Quadra Thru--9-
    former retail price €49.58 (VAT excl.) No longer available!
  43. MIDI Solutions Relay

    The Relay Switch contains a MIDI-controlled contact closure that can be programmed to respond to a wide range of MIDI messages.

    Details
    MIDI Solutions Relay--9-
    former retail price €125.21 (VAT excl.) No longer available!
  44. MIDI Solutions Router

    The Router allows you to of course to route but in the same time also to filter, and rechannelize selected MIDI messages to either/both/neither of its two MIDI outputs. 10 settings are easy to programm and save.

    Details
    MIDI Solutions Router--9-
    former retail price €125.21 (VAT excl.) No longer available!
  45. MIDI Solutions T8

    If more Midi outputs are needed, this useful 19" tool provides 8 MIDI outputs from a single MIDI input.

    Details
    MIDI Solutions T8--9-
    former retail price €167.23 (VAT excl.) No longer available!
  46. MIDI Solutions Thru

    If more Midi outputs are needed, this useful tool provides 2 MIDI outputs from a single MIDI input.

    Details
    MIDI Solutions Thru--9-
    former retail price €41.18 (VAT excl.) No longer available!
  47. MIDI Solutions Velocity Converter

    Phase-out model. Sales only as long as stock lasts

    This little helper can be used to modify the velocity response of any MIDI instrument by using one of 40 preset curves.

    Details
    MIDI Solutions Velocity Converter--9-
    former retail price €125.21 (VAT excl.) No longer available!
  48. Midisolutions Breathcontroller

    The Breathcontroller by Midisolutions converts incoming controller data from Yamaha BC3 controller into MIDI messages. This makes sense especially to simulate brass instruments or flutes over any kind of sample player or whatever.

    Attention: Yamaha doesn´t manufacture the breath controllers anymore!

    Details
    MIDI Solutions Breath Controller--9-
    former retail price €167.23 (VAT excl.) No longer available!
  49. Midisolutions Eventprocessor / plus

    phase out model. Sales only as long as stock lasts.

    The Eventprocessor is a programmable tool to fix any kind of problem you could have in MIDI communication just with this piece of hardware. The simple eventprocessor yet can filter, vary, extract, compress or modify somehow up to 10 different incoming Midi-informations at the same time. The Eventprocessor plus can handle up to 32 !!

    Details
    MIDI Solutions Event Processor Plus--9-
    former retail price €158.82 (VAT excl.) No longer available!
  50. Midisolutions pedal-to-midi-converter

    To control any midicontroller over a simple Volumepedal this unit is the right converter. The incoming "value" from the pedal will be merged to the incoming midi-flow to be forwarded together over the midi-out. The editing has to happen of hexadezimal or over a free pc-editor from the manufacturers site. the unit does not forget what to do if its once programmed.

    Details
    MIDI Solutions Pedal Controller--9-
    former retail price €125.21 (VAT excl.) No longer available!

Items 1 to 50 of 61 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Nur verfügbare anzeigen