Archive

Not in production anymore.

The bass drum voice circuitry from theTR-808 in an Eurorack module. Unlike the original you can tune the bassdrum; the attack generated by theTone control is somewhat stronger and in general the module has a slightly own sound.

The HP-01 is an useful audio output module with adjustable master output and headphone output. The three input socket make mixing a number of signals possible.

Keyboard version of the Leipzig-S synthesizer. The sound circuitry with 2 VCOs, one Moog filter, 2 ADSRs and a LFO remained unchanged but additionally there´s a 37-key keyboard with a LCD for editing keyboard parameters.

Affordable and simple basic VCO is 6HP width featuring the most inportant functions. It has CV inputs for frequency and pulse width, waveformwise we´ll find sawtooth and pulse.

Small, passive adaptor module containing two adapters from 3.5mm jack to 6.3mm (1/4") jack.

Not in production anymore.

The BD78 is an accurate replica of the CR78 bass drum sound. Due to its tune control and decay parameters TR808 style Toms and Congas can be produced, too. The BD78 can be tuned way low with long decays.

Not in production anymore.

Drum voice module with the circuitry of the TR-808 cowbell, with expanded parameters like e.g. two separate tune controls for both tone generators

Not in production anymore.

Drum module with the circuitry of the TR-808. Like the original you can control tune and level

Not in production anymore.

Drum voice with the CLAVES circutry from the Roland TR-808.

Analogue Solutions CV-to-MIDI converts two channels of CV and gate information into MIDI note commands.

The module generates 8 trigger signals at 8 jacks in dependancy ofthe value of an incoming voltage.

ATTENTION: the module needs an additional 5V operational voltage!

Eurorack version of the Analogue Solutions Oberkorn³ analog sequencer. If has three tracks of CVs ,two gate tracks and interesting binary step address fuctions. Besides this the module features a voltage controlled clock generator, reset buttons, a transpose input per CV row and also slide at row A and B. Pure sequencer power on 84HP width.

The Europa is a hardware steps sequencer with 16 steps. It can be used for programming melody and drum patterns and outputs besides MIDI analog triggers as well.

Not in production anymore.

Both the open and the closed HiHat sound of the TR808 come in this Eurorack drum voice module.

The Leipzig-S is the improved version of Analogue Solutions´ Leipzig synthesizer. Besides the flat housing which makes it possible to use the unit on a desk, Analogue Solutions added a handy eight-step analog sequencer which can of course be synchronised to MIDI.

Simple and narrow LFO module with two wave forms.

The VCO SUB features an analog VCO with a sub-oscillator section. All three sub-octaves generated by the sub-oscillator are derived from the oscillator´s frequency.

The MT9 is an advanced MIDI to triggering module. It allows triggering of a range of analogue devices; drum voice modules, envelope modules, analogue sequencers, analogue drum machines, and anything else with a gate, trigger or clock input.

The MX224 is a 2 input mixer, inverter and buffer. It can mix audio, control voltages and gates with multiple normal and inverted outputs. Ideal for buffered multiplying signals with no signal drop.

Simple yet very useful small module: a mixer with six unity gain inputs, one normal and one inverted sum output. You can use the module as an inverter, too.

The Oberkorn³ is the recent model of the Oberkorn sequencer series, now in a nice metal housing and many features like internal Clock generator, transpose inputs, MIDI and glide.

Not in production anymore.

Analogue Solutions´ drum sound module for the Eurorack. Reproduction of the circuitry of the TR-808 Rimshot.

Not in production anymore.

Discrete analog drum voice with the circuitry of Roland´s CR-78 snare drum with an additional tune parameter.

Not in production anymore.

Analogue Solutions SD88 is a faithful reproduction of Roland´s TR-808 snare drum with a few extras.

A nice module by Analogue Solutions is the SH-NZ which stands for Sample and Hold  and Noise. And that´s exactly what´s inside.

The SQ-8 is a one-track CV sequencer with 8 steps. As the SQ-8 is an independent sequencer you can run several of them, each with an other clock.

Analogue Solutions SY02 Multimode Filter/VCA A great module with a multimode filter and a VCA.

Monophonic analog synthesizer with the layout of a Oberheim SEM. The Telemark is the semi-modular version of the SEMblance by Analogue Solutions. the new version Telemark v2 now has a ring modulator and a sub oscillator (divder circuit).

Analogue Solutions Tereshkova synth is basically the same as the Vostok but it lacks the pin matrix patch panel and the VU meter.

Not in production anymore.

Analog Eurorack drum module with the circuitry of the Roland TR-808 TomToms wit additional noise parameter

The VCO-RING MOD combines an analog VCO and an independent ring modulator circuit

As a modular synthesizer with the 22x22 pin patch matrix and extraordinary features like 3VCOs, a 8 step sequencer and a joystick, the Vostok Deluxe is clearly a unique workstation. Vostok Deluxe features a bigger case, a spring reverb, sequencer with a step-repeat function, a third LFO and more sockets and attenuators.

The module VU01 is a classic VU meter for displaying input signal strength by a moving needle.

Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

RS-190 is out of production

The RS-190 combines a real analog VU meter with an inverter

Faithful reproduction of the legendary and rare analog frequency shifter from the Moog modular system, designed by Harald Bode. The RS-240impresses with features like exponential and linear shifting scales, integrated squelch circuitry, very clear sound and several audio outputs ... yeah, and by that HUGE knob ;)

The Tinysizer by Anyware Instruments is probably one of the smallest modular syntheiszers in the world. It can be placed upright like a PC monitor with the integrated stand. 340 (!) patchpoints are integrated in the form of high-quality multipoint connectors which are patched by jump wires. 30 of those "micro patchcords" are included, further ones can be purchased in local electronic shops.

This desktop unit is a clone of the wild and nasty filter circuit from the vintage russian Polivoks synthesizer. It is built with genuine russian ICs and the sound circuit is 100% analog.
What makes the Acidbox really briliant is the mighty versatile LFO with synchronisation, tap tempo, plenty of wave forms, waveshaping and tempo multiplication/division. This totally invites you to jam with the unit instantly! Hot stuff!

Phase-out model. Sales only as stock lasts!

The C3 is a three-channel module for recording and playing back movements of controllers. Those can be recorded with each channel´s individual knob. The momevents will be output as control voltages.

Sync Gen 2 LS is a module for sample-accurate rhythmical pulse synchronisation between your DAW and your Eurorack modular system. Or in simple words: for creating a perfect clock from your computer!
The clock is available at several minijack sockets and in addition there is a MIDI clock output and a DIN-Sync output!

Having been split up in three components the sync shifter is serving many conversion problems offering you better timings and grooves just in time while using midi and sync24/Din sync based hardware.

The bigger version of Innerclock's Sync-Gen again generates a very stable MIDI clock via your computer's audio interface but it has been expanded by a number of MIDI Clock outputs and even DIN Sync outputs.

Expansion module for the E350 Morphing terrarium by Synthesis Technology. It adds two functions that otherwise are only accessible via jupers on the backside of the E350 and has an attenuator in addition.

Out of production.

This module is a so-called OR-combiner i.e. a circuitry that mixes trigger and gate signals. The mutinator contains four, partially normalized channels with each two inputs that can be manually routed or muted. It works great in combination with drum modules and several trigger sources like sequencers etc.

Very small yet powerful digital sequencer with variable sequence lenght, in-built clock divider, quantizer, arpeggiation, random, a drift function as well as a sample & hold function. Programming is handled by two encoders for step and value, each with it's own display. Furthermore there are three modes: Playback, Sequence editing and the settings menu. The created sequences are saved automatically.

The MIDI Delay is a high accuracy programmable MIDI delay.

With a double footswitch or switch triggers you can generate Midi signals of any kind.  The converter has to be taken between a midi sender and a midi receiver, it will be powered up from the incoming midi sender. The generated Midi informations depending on the switch or trigger action will be merged to the forwarded midi flow. Potentially nessessary programming can be made over the midi in connection.

Universal Werkzeug für Midi-Geräte, übersetzt, filtert, triggert, schaltet, usw. 10 settings sind speicherbar.

Im 19" Format kann dieses Gerät bis zu acht Fußschalterkontaktsignale zu Midisignalen umwandeln.