Items 1 to 50 of 95 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Nur verfügbare anzeigen
  1. Vermona - dual buffered multiple/inverter (1U module)

    This 1U module by Vermona is equipped with two active i.e. buffered multiples which offer inversion as well. The left set of multiples has also an offset input, e.g. for transpositions.

    Details
    ERM Midiclock+
    former retail price €116.81 (VAT excl.) No longer available!
  2. Synthwerks USB LED Lamp

    Gooseneck LED-lamp with white LEDs.

    Use it as a replacement for defective lamps on your Synthwerks Lamp-1 and Lamp-2 modules or just as a USB lamp for your laptop computer.

    Details
    Synthwerks USB LED Lamp
    former retail price €10.08 (VAT excl.) No longer available!
  3. Synthrotek - Noise Filtering Distribution Board

    This passive bus board's main feature are the noise filtering capacitors located at three locations of the board. They reduce noise and bleedthru between modules and provide for clean signals. 17 connectors for modules are more than competitors' busboards offer.

    Details
    Doepfer A-100 Busplatine
    former retail price €46.22 (VAT excl.) No longer available!
  4. Synthrotek - MIDI to CV

    This MIDI interface definitely stands out because monophonic conversion of MIDI notes (from MIDI In or USB) into CV and gate as well as MIDI Clock to analog clock is one function only. As the USB port in this module can send data too, you might as well convert MIDI data from the DIN socket to USB MIDI (or the other way round) and convert analog clock into MIDI Clock.
    Let's read the sentence one again: use your modular system for generating a MIDI master Clock and synchronise for instance your computer to your modular!!!

    Details
    Synthrotek - MIDI to CV
    former retail price €158.82 (VAT excl.) No longer available!
  5. Synthrotek - Echo

    Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

    Details
    Synthrotek Echo - front
    former retail price €92.44 (VAT excl.) No longer available!
  6. Synthrotek - DLY (Delay)

    Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
    Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

    Details
    Synthrotek Echo - front
    former retail price €113.45 (VAT excl.) No longer available!
  7. Synthrotek - Deluxe Power BRICK (6A, 90W)

    Powerful external "laptop style" power supply which is perfectly suited for Synthrotek's Deluxe Power module, providing 90W, which corresponds to 1.6 Amperes of power.

    Details
    4ms Row Power - Power Brick 90W
    former retail price €25.21 (VAT excl.) No longer available!
  8. Synthesis Technology - E350 Morphing Terrarium

    Unique wavetable VCO with 2 independent waveform outputs. What sets the E350 apart from previous wavetable oscillators is the voltage-controlled two-dimensional morphing. Sound is really good and clear.

    Details
    Synthesis Technology E350 Morphing Terrarium--9-
    former retail price €335.29 (VAT excl.) No longer available!
  9. Synthesis Technology - E340 Cloud Generator

    The E340 simultaneously generates eight digital oscillators that can be detuned in relation to each other. The result ranges from soft beatings over supersaw-ish rave pads to organ-like sounds.

    Details
    Synthesis Technology E340 Cloudgenerator--9-
    former retail price €315.13 (VAT excl.) No longer available!
  10. Sputnik Modular - Quad Function + Trigger Source

    Phase-out module. Few in stock. Sales only as long as stock lasts.

    This module contains four voltage controlled function generators that can be used in pairs, in order to mix them and additionally to create more complex envelopes in quadrature mode. Each channel can be used as an AD envelope or as LFO and also generates pulses.

    Details
    Intellijel designs quADra--9-
    former retail price €247.90 (VAT excl.) No longer available!
  11. Sound Study Modular - MIDI 2 CV

    As a clone of the open source project CV PAL by Mutable Instruments the Midi 2 CV is in first line fast as lightning, at least with certain computer operating systems. It offers various modes of operation, a range of four octaves and a resolution of less than 2 mV. It connects and is supplied with power via USB only.

    Details
    Synthrotek - MIDI to CV
    former retail price €75.63 (VAT excl.) No longer available!
  12. soft touch knob for D-shaft

    Light grey soft touch knob with a rubber shaft. The same type as used by Cwejman in a light grey. (Picture shows white edition.)

    Details
    Soft Touch-Knopf für D-Shaft--9-
    former retail price €0.63 (VAT excl.) No longer available!
  13. Simple Circuits - APC Pro

    This Atari Punk Console Pro is based on a classic APC circuitry, consisting of an instable square wave oscillator which controls a monostable oscillator, producing a pulse wave.
    The module is voltage controllable and guarantees wonderful low-fidelity, old school Atari sounds.

    Details
    Simple Circuits - APC Pro
    former retail price €100.00 (VAT excl.) No longer available!
  14. Qu-Bit Electronix Nano Rand (silver)

    Small, multi-functional and in first line musical random module with four selectable random algorithms, sample & hold, noise and random gates The Nano Rand can be clocked either internally or externally.

    Details
    Doepfer A-118  Noise / Random--9-
    former retail price €158.82 (VAT excl.) No longer available!
  15. Qu-Bit Electronix - RT60

    Stereo multi effects processor with seven DSP effects and voltage control of all parameters.

    Details
    Flame FX6 Eurorack module
    former retail price €155.46 (VAT excl.) No longer available!
  16. ProModular - MIIIIX (the only alternative to Cwejman's MX-4S)

    Four-channel voltage controlled mixer with saturation, voltage control of panorama and level. Furthermore with an individual output, mute- and solo-buttons per channel. An infinite number of MIIIIX modules can be chained.

    At the moment we consider it to be the only alternative to Cwejman's MX-4S!

    Details
    Cwejman MX-4S
    former retail price €546.22 (VAT excl.) No longer available!
  17. ProModular - Insert

    Expansion module for the ProModular MIIIIX - it upgrades it by four send/returns with voltage controlled dry/wet-mix and bypass. The expander can be used as four additional mixer inputs as well.

    Details
    Cwejman MX-4S
    former retail price €239.50 (VAT excl.) No longer available!
  18. Polyend - Perc Pro

    With the Perc Pro, you can add an acoustic drummer to your setup. In contrast to the counterpart made of flesh and blood, this drum system always plays tight and never gets tired. In addition, Perc Pro doesn’t mind to play everyday items instead of kick, snare, cymbal and so forth. – Bottles, cans or sheets of metal. Lots of stuff works great as a percussion instrument. Simply connect your MIDI or CV / gate equipment and start experimenting. – A great novelty with enormous creative potential!

    Details
    Sequentix Cirklon basic--9-
    former retail price €1,091.60 (VAT excl.) No longer available!
  19. Ploytec 34One II MIDI tap tempo pedal

    Einfach und genial aber vor allem: es funktioniert! Wer als Keyboarder, Percussionist oder DJ  seine laufenden Sequenzer zu human variierendem Tempo oder auch einfach zum DJ-Beat synchronisieren will oder muss, ist mit dem 34oneII-Pedal gut beraten.

    Nach einer kurzen Eingewöhnungszeit trifft man die eins und kann auch Temposchwankungen gekonnt abfangen oder aufholen, es werden immer die letzten fünf Taps zur Berechnung des laufenden Tempos benutzt. Wenn man länger als 1 Sekunde auf dem Taster steht, sendet das Pedal auf allen Kanälen einen Stop-Befehl und verbraucht ab sofort nichts mehr von dem Strom der Batterie. Die Lebensdauer des 9V Blocks liegt oberhalb von 50 Stunden.

    Details
    Ploytec 34oneII Midi-clock-Pedal V2--9-
    former retail price €100.84 (VAT excl.) No longer available!
  20. Plankton Electronics - The Earwig

    Discontinued. SALE of the very last unit (as long as stock lasts).

    The Earwig module is a recifying mixer or a mixing dual rectifier, up to you. It offers two channels with gain control, four ways of rectification, inversion and two offset controls; the channels can be used individually for processing CVs and audio signals but the additional mixing function gives you the sum and the difference of both channels.

    Details
    Erica Synths - Matrix Mixer front
    former retail price €176.47 (VAT excl.) No longer available!
  21. Patchkabel ? 6,3KMW ? 6,3KMW / 0,15m ? 6stk. ? PVC

    6 coloured unsymetric 1/4" mono jack patch cabels with 2 PVC angle plugs.

    Details
    Patchkabel - 6,3KMW - 6,3KMW / 0,15m - 6stk. - PVC--9-
    former retail price €6.72 (VAT excl.) No longer available!
  22. Orthogonal Devices - ER-101 (Nostalgia)

    We will not be getting this unit anymore because OD has stopped reselling to dealers. Please buy directly.

    Unique and pretty complex digtal real-time sequencer with four tracks and memory. It makes it possible to compose sequences with thousands of steps with variable duration, variable gate length, arbitrary scales. Smooth tempo-matched transitions; mathematical functions per step; copy/paste; note repeat (ratchet) and shuffle per step. New firmware can be easily loaded via USB and the module can be expanded.

    Nostalgia version with white print on dark grey powder coated faceplate.

    Details
    Make Noise René--9-
    former retail price €604.20 (VAT excl.) No longer available!
  23. Mutable Instruments - Peaks

    Two channel general purpose module for processing trigger signals. In simple words: inject a trigger or a gate and create envelopes, synchronized LFOs, a tap-tempo LFO or deum sounds. Three modes allow for different use of the controls.
    In a not-so-secret mode you can use four alternative functions.

    Details
    Mutable Instruments - Peaks
    former retail price €142.02 (VAT excl.) No longer available!
  24. Mutable Instruments - Edges

    Quad generator for chiptune sounds. Each channel offers CV control of frequency, a FM CV-input and a gate input (note on /off). Additionally there are modulation options, a quantizer and a sequencer.

    Details
    Mutable Instruments - Edges (front)
    former retail price €251.26 (VAT excl.) No longer available!
  25. Mutable Instruments - Braids

    The Braids is a digital macro-oscillator. It´s sound engine outclasses any VCO by far because the sounds are very complex and only two controls are used to affect several timbre parameters simultaneously. Braids is capable of different synthesis forms like FM, wavetable, vocal sound creation, analog emulation, noise, digital synthesis and even physical modeling. And it sounds awesome!

    Details
    Mutable Instruments - Braids (front)
    former retail price €293.28 (VAT excl.) No longer available!
  26. Mungo Enterprises - Zoom module

    All modules from Mungo's Zero series offer a Zoom function to operate all potentiometers (parameter controls and attenuators) with coarse, normal or fine resolution. This is especially super useful for oscillator frequencies and delay times. The Zoom module enables this function.

    Details
    Mungo Enterprises - Zoom module
    former retail price €27.73 (VAT excl.) No longer available!
  27. Mungo Enterprises - w0 Arbitrary Oscillator

    Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

    Details
    Mungo Enterprises - w0
    former retail price €503.36 (VAT excl.) No longer available!
  28. Mungo Enterprises - v0 Vocoder

    The v0 is a spectral processor which can be used as a vocoder or bandpass filter. Features like an envelope respectively envelope follower, its freeze function and several control voltage inputs turn this module into a powerful tool for sound design.

    Details
    Doepfer A-128  Fixed Filterbank
    former retail price €503.36 (VAT excl.) No longer available!
  29. Mungo Enterprises - r0 Reverb

    While many reverb modules have only "size" and "feedback" parameters and sometimes include a filter, the r0 uses a more complex and pretty unique approach. It models a room with adjustable size, width and decay time in which you can position the object separately from the pick-up/microphone. Pretty much like in a echo chamber, only with the difference that you can create extreme and unnatural rooms with the r0.

    Details
    CG Products - Delay1022 Mk2
    former retail price €503.36 (VAT excl.) No longer available!
  30. Mungo Enterprises - p0 Percussion

    The p0 is a world class drum generator, which uses physical modeling to create sound. Specialties of the circuit are metallic instruments like hi-hats or cymbals. However, it is also possible to create bongos, toms and even kicks. Besides that, thanks to a clever parameter selection, the module can generate lots of extraordinary, partly psychedelic sounds. Control voltage inputs allow musicians to compose interesting rhythms with just one p0.

    Details
    Tiptop Audio Hats808 - TR 808 HiHats--9-
    former retail price €503.36 (VAT excl.) No longer available!
  31. Mungo Enterprises - n0 Noise

    Describing the n0 as a noise generator is a complete understatement! Yes, it can do noise and this over a huuuuge frequency range but this module from Mungo's Zero series can be way more: a random generator, variable waveshaping oscillator, clock divider, tepmo-synchronized LFO, slew limiter, filter and a S&H or T&H! A swiss army knife of the digital kind.

    Details
    Doepfer A-118  Noise / Random--9-
    former retail price €419.33 (VAT excl.) No longer available!
  32. Mungo Enterprises - g0 Granular processor

    The g0 is a high-end granular processor, which can manipulate audio signals in various ways. Pitch, playback position and speed as well as the size of the audio window are individually adjustable. Raw material can be fed into the module in real-time or by SD card. No matter if you want to stretch audio material, chop it up rhythmically and rearrange it or just create wild grain chaos, this is the module for you.

    Details
    Audio Damage - Grainshift
    former retail price €503.36 (VAT excl.) No longer available!
  33. Mungo Enterprises - d0 Delay

    Voltage controlled two-channel digital delay module with delay times of .2mS to 2S. It tracks 1V/octave CVs, pitch and even offer clock synchronisation. For tuned feedbacks an autotune function is available.

    Details
    CG Products - Delay1022 Mk2
    former retail price €503.36 (VAT excl.) No longer available!
  34. MUC-400 Eurorack MIDI/CV Interface

    Universal, freely programmable MIDI/CV converter with eight channels and 16Bit conversion. It features v/oct, Hz/V, S-Trig, polyphonie, all 128 MIDI controllers, velocity, channel pressure, poly pressure, clock, trig and sync and much more. 16 outputs, eight of which can provide control voltages. Simultaneous use of 16 MIDI channels is great for polyphonic applications. 4 presets can be saved.

    Details
    Doepfer A-190-1  Midi/CV-interface
    former retail price €276.47 (VAT excl.) No longer available!
  35. Monorocket Skiff - Ford Black

    not in our product range anymore

    The flat S3 104m case is the successor of the old Skiff. It´s pretty much the same product but now it has 104 HP space for modules. Here in our online shop it is exclusively available in the "Ford Black" color option.

    The skiff doesn´t contain a power supply - it has an inttegrated DIN-Power by Make Noise that gets it´s power from your main modular system. Please allow for additional 4HP in your main system as that´s the space the master power module needs. The receiving slave is integrated in the S3 104m case.

    Details
    Monorocket S3 104m Skiff Ford Black--9-
    former retail price €231.09 (VAT excl.) No longer available!
  36. Microbe Modular - Equation Composer

    Inspired by VIznut's "Algorithmic symphonies from one line of code" and the BitWiz Audio Synth, the Equation Composer creates a wide range of gritty, 8-bit sounding melodies, waveforms, and noise. The module is organized into CV selectable "programs", where each program can act like a unique synthesizer.
    Digital wavetable VCOs, chord generators, pattern generators, drum voices are included but you can load other programs into the module as well!

    Details
    Mutable Instruments - Braids--9-
    former retail price €210.08 (VAT excl.) No longer available!
  37. Intellijel designs uStep v2

    The µStep is a 4HP dual trigger/gate sequencer for the space-conscious Eurorack system.
    Use this module for Beat/trigger sequencing (great for polyrhythms), Control of adsr/asr envelopes, Clock dividing, Swing Clock, Convert Gate to Trigger

    Details
    Intellijel designs uStep v2
    former retail price €167.23 (VAT excl.) No longer available!
  38. Intellijel designs uFade

    Another small module from Intellijel is the uFade, a 4HP wide voltage controlled crossfader.

    The uFade is a cooperation between Intellijel and the analog guru David G. Dixon.

    Details
    Intellijel designs uFade
    former retail price €117.65 (VAT excl.) No longer available!
  39. Intellijel Designs - Dixie CTRL

    The DIXIE CTRL is an expansion module for up to four Intellijel Dixie oscillators. It adds attenuators and controls for pulse width and PWM, linear and exponential FM and a main 1V/octave input.

    The expander is suitable for both version, the old 4HP wide Dixie and the new Dixie 2 but not for the Dixie 2+.

    Details
    Intellijel designs Dixie CTRL--9-
    former retail price €63.03 (VAT excl.) No longer available!
  40. Instrumentenkabel ? 6,3KM ? 6,3KM / 1,5m ? PVC

    black instrument cable with one jack on each side. 6.3mm (1/8") mono jack. 1.5m long (5ft)

    Details
    Instrumentenkabel - 6,3KM - 6,3KM / 1,5m - PVC--9-
    former retail price €4.20 (VAT excl.) No longer available!
  41. Indaboxx - greyhound (3U Skiff, aluminium)

    Indaboxx' grexhound is a lightweight and yes sturdy 3U aluminium Skiff with real wood side panels. It offers one 84HP wide row Eurorack modules with a maximal depth of 50 mm. No power supply included.

    Details
    Indaboxx - greyhound
    former retail price €100.00 (VAT excl.) No longer available!
  42. Indaboxx - boxer (6U suitcase, stained wood)

    The boxer is a transportable Eurorack suitcase-style enclosure made of stained wood. It offers two rows of 84HP width. Hand-made in Germany. No power solution included.

    Details
    Indaboxx - boxer (6U suitcase, stained wood)
    former retail price €205.88 (VAT excl.) No longer available!
  43. Indaboxx - boarhound (6U Skiff)

    The boarhound is a beautiful, handmade Skiff enclosure for Eurorack modules, being covered with cloth and sporting nice wooden side panels. It is 6 units high which means it has two rows, each with 84 HP space. No power supply included.

    Details
    Indaboxx - boarhound
    former retail price €163.87 (VAT excl.) No longer available!
  44. Hackme Electronics - Vectr (silver front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!
  45. Hackme Electronics - Vectr (black front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!
  46. Flame - 2013 Arpeggiator (incl. X2013 expander)

    Arpeggiator module containing two arpeggiator channels for bass and melody. Each arpeggiator´s pitch and clock (or gate) are available at individual outputs. The first four notes of the melody arpeggio (ARP) are output as chord at four dedicated CV outputs 1-4. With the miniature keyboard notes can be entered directly as cords or scales, The included expansion module X-2013 allows you to output the arpeggios via MIDI, to sync the module to MIDI clock and gives 8 clock outputs for sequencer tracks.

    Details
    Flame 2013 Arpeggiator + X-2013 Expander
    former retail price €315.13 (VAT excl.) No longer available!
  47. Erica Synths - Sequential Switch

    Erica's Sequential Switch module together with it's control interface is unique and it's features set it apart from others. Each of the eight channels can be turned on and off individually or be skipped, can output a gate and be merged with the adjacent channel to generate tied gates.
    The module makes it possible to create sound and clock sequences, to switch signals or to send one audio source to eight different destinations sequentially.

    Details
    Erica Synths - Sequential Switch
    former retail price €109.24 (VAT excl.) No longer available!
  48. Erica Synths - Matrix Mixer

    Truly deluxe matrix mixer with touchscreen operation, 250 memory slots and buffered outputs. Several presets can be chained and sequentially switched with a clock signal

    Details
    Erica Synths - Matrix Mixer front
    former retail price €385.71 (VAT excl.) No longer available!
  49. Erica Synths - Fusion VCO Mixer (v1)

    This module contains two three-channel tube mixers which have been designed specially for direct mixing of VCO waveforms. Because of the tube sound and it' saturation behaviour this module can be used as a fine waveshaper, which can sounds pretty brutal when 3 VCOs are mixed at high levels. Especially living waveforms with constantly changing harmonic content like PWM will be heavily processed by the tube.

    Details
    Doepfer A-138u Dual Micro Mixer (2x3)
    former retail price €289.92 (VAT excl.) No longer available!
  50. Erica Synths - Fusion V1 tube heater power supply (220V)

    Small 6V AC power supply which must be installed if you want to use Erica Fusion V1tube modules. Advantage is that the tubes won't draw energy from your main Eurorack power supply when heating up.
    One Fusion V1 power supply can provide enough energy for the heaters of up to seven Fusion V1 tube modules.

    Details
    Synovatron ASm2Db-1-
    former retail price €25.21 (VAT excl.) No longer available!

Items 1 to 50 of 95 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Nur verfügbare anzeigen