Items 151 to 300 of 448 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
  1. Synthrotek - Verb

    Charming vintage reverb – Synthrotek’s Verb sounds a little like a spring reverb, a little like a bucket brigade circuit and a little like a saturated tape echo. The effect processor uses three PT2399 ICs to process audio material. Its results can be huge. Subtle modulations give reverbs more liveliness. High doses lead to pitch effects. A mix potentiometer allows users to freely combine dry and wet signals. By influencing this parameter with a fast CV signal, it is possible to create FM-like effects.

    Details
    Befaco - i² Instrument Interface
    former retail price €142.02 (VAT excl.) No longer available!
  2. Synthrotek - Quadrangle

    A specialist for complex modulations – Quadrangle is composed of four envelopes with AD, AR and loop mode.  All attack and decay respectively release parameters can not only be adjusted via knobs, but are voltage controllable as well. Fast attack times lead to a snappy, percussive behavior. While in loop mode, the envelopes can go up into the audio range. Bipolar attenuators allow users to level and / or invert CV signals generated by the circuits. Via trigger outputs, it is possible to daisy-chain several channels to form a multistage envelope or a complex LFO.

    Details
    Befaco - i² Instrument Interface
    former retail price €234.45 (VAT excl.) No longer available!
  3. Synthrotek - TST

    Just checking – With the TST, users can relocate two 16-pin headers from the bus board to the front of a modular system. LEDs visualize the power status of +12 V, -12 V and +5 V rails. A great idea for quickly checking out new modules, DIY projects and so forth.

    Details
    Befaco - i² Instrument Interface
    former retail price €24.37 (VAT excl.) No longer available!
  4. Bastl Instruments - Dynamo

    please order directly here: http://www.bastl-instruments.com/

    Really odd and unconventional module combining and intertwining an envelope follower, a rectifier, a comparator and a voltage controllable switch.
    You may ask: What for? Well, for extracting gates from an audio signal. For generating a compressor curve CV which turns any better VCA into a flexible compressor. Or for creating a "fake" Thru-Zero modulation!
    The individual sections can be used separately of course.

    Details
    Bastl Instruments - Dynamo
    former retail price €109.24 (VAT excl.) No longer available!
  5. Bastl Instruments - Tromsø

    Tromso contains three separately useable circuits: a voltage controlled triangle wave oscillator, a comparator and finally a sample & hold which can be used as a track & hold alternatively.
    So far it is a handy small tool but normalizations between the individual sections make it even more interesting because in this case the module is great for analog downsampling of audio signals i.e. as a sample rate reducer.

    Details
    Bastl Instruments - Tromsø
    former retail price €109.24 (VAT excl.) No longer available!
  6. Bastl Instruments - Knit Rider

    Please order directly here: http://www.bastl-instruments.com

    Versatile six-track trigger/gate sequencer which offers up to 256 steps per pattern, yet remaining the fast and easy-to-use workflow of a classic 16-step sequencer. The solution is a smart partition into pattern, bar, step and sub-step as well as very useful functions like clear, copy/paste and undo.
    What else: mute per voice, clock generator, step repetition, saving everything on microSD card, record function.

    Details
    Bastl Instruments - Knit Rider
    former retail price €234.45 (VAT excl.) No longer available!
  7. Bastl Instruments - Little Nerd

    Bastl call it to the point a "trigger toolie", to be exact this module is a multi-channel processor for clocks, triggers and gates. It has two sections which can be coupled or used individually. In total there are five outputs processing input signals in a different way: by clock delay, clock division or clock multiplication, trigger repetition but also in form of a euclidian sequencer, a probability based groove generator and finally a clock oscillator.

    Details
    Bastl Instruments - Little Nerd
    former retail price €125.21 (VAT excl.) No longer available!
  8. Bastl Instruments - Quattro Figaro

    Please order directly here: http://www.bastl-instruments.com

    In this module four linear VCAs are combined in a smart way by using internal routings, inversions and mix outputs to form an easy-to-use voltage controlled mixer/panner module. Each channel might as well be used as a individual VCA or even as a voltage inverter.

    Details
    Bastl Instruments - Quattro Figaro
    former retail price €167.23 (VAT excl.) No longer available!
  9. Bastl Instruments - MicroGranny 2.4

    The popular MicroGranny2 is a monophonic standalone granular sampler/sample player in miniature format. It records and can read WAV files from microsD card and processes it via granular algorithms. Adjustable parameters are start and end point of the sample as well its sample rate and bit crushing - for modulation an attack-decay envelope generator is available. Via MIDI you can control all parameters, transpose the sample or play different grains by individual notes.
    The unit has an Arduino chip which can be hacked.

    Details
    Bastl Instruments - MicroGranny 2
    former retail price €162.18 (VAT excl.) No longer available!
  10. Bastl Instruments - Popcorn

    Please order directly here: http://www.bastl-instruments.com

    An unusual, because non-linear sequencer concept. The eight steps can be addressed in a number of ways: by several trigger signals which go one or more steps forward or backward, by using control voltages or even with three binary gates. A control voltage input is included as well, either transponsing the pitch quantized / non-quantized or or even to change the quantiser's scale from major to minor.

    Details
    Bastl Instruments - Knit Rider
    former retail price €213.45 (VAT excl.) No longer available!
  11. Audiothingies - CED tuner/suboctave

    Not available for an uncertain time.

    The CED module on one hand is used as an oscillator tuner with two different modes of operation and a LED chain for visualsation, on the other hand it can be a sub octave generator with adjustable octave. That's two modules in two HP only!

    Details
    Audiothingies - CED
    former retail price €83.19 (VAT excl.) No longer available!
  12. Audio Damage - Neuron

    Audio Damage brings you the Neuron a versatile digital drum voice, sounding good and being utterly flexible. The by-name "FM Drum Voice" is a slight understatement because besides FM sounds the module can do pretty much everything from the electro drum kit: filtered noise makes snare drums possible, a wide frequency range allows for kicks, toms and more, FM provides you with anythind metallic, cymbals and effect sounds. A 2-in-1 distortion and a pitch envelope is abord, too.

    Details
    Audio Damage - Errorbox
    former retail price €335.29 (VAT excl.) No longer available!
  13. Audio Damage - Kompressor

    Unlike other compressor modules on the market this one is #1 stereo and #2 DSP-based. It can be used as a mono compressor, as stereo compressor or in a side chain mode. This module's code is known from some Audio Damage plug-ins like the Rough Rider, Kombinat Diva and more and is now available as hardware.

    Details
    WMD Compressor--9-
    former retail price €276.47 (VAT excl.) No longer available!
  14. KOMA Elektronik - Poltergeist

    Please order directly with KOMA Elektronik https://koma-elektronik.com/

    The Poltergeist, being an entirely voltage controllable quadrophonix mixer is a very extraordinary and unique module you can mix and control signals quadraphonically with complete control and beyond. Four channels each with it’s own VCA, plus a stereo auxiliary input, are mixed out to four separate outputs enabling the user to manipulate signals both stereophonically and quadraphonically in entirely new and ghostly ways.
    With not less than 48 analog SSM-VCAs it's a very laborious module KOMA needed a lot of brain juice and patience for.

    Details
    KOMA Elektronik - Poltergeist
    former retail price €713.45 (VAT excl.) No longer available!
  15. ADDAC 501 Complex random (V2)

    The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.
    It can also be triggered by an external CV source or the internal clock and the output voltages can be either free or quantized (if you prefer to have a standard C Major Pentatonic scale).
    Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

    Details
    ADDAC 501 Complex random - front
    former retail price €310.08 (VAT excl.) No longer available!
  16. Analogue Systems - RS8000 cabinet

    Four-storied wooden cabinet made of finest walnut wood, intended for mounting 3U modules by Analogue Systems. It provides as power supply and a "trink line". Each of the RS8000's four rows offers 84HP space for modules.

    Details
    Tiptop Audio Station 252 Black Widow--9-
    former retail price €2,512.61 (VAT excl.) No longer available!
  17. Bastl Instruments - Hendrikson

     please order directly here: http://www.bastl-instruments.com/

    Jimi Hendrikson would have had a lot of fun which this module, processing his guitar with a modular system or connecting his stomp boxes.
    The module is versatile; it can be either a pre-amplifier for guitars and other instruments or a interface for external effects with voltage control of the dry/wet mix. You might as well realize a voltage controllable feedback loop with external effects.

    Details
    Bastl Instruments - Hendrikson
    former retail price €109.24 (VAT excl.) No longer available!
  18. Polyend - Perc Pro

    With the Perc Pro, you can add an acoustic drummer to your setup. In contrast to the counterpart made of flesh and blood, this drum system always plays tight and never gets tired. In addition, Perc Pro doesn’t mind to play everyday items instead of kick, snare, cymbal and so forth. – Bottles, cans or sheets of metal. Lots of stuff works great as a percussion instrument. Simply connect your MIDI or CV / gate equipment and start experimenting. – A great novelty with enormous creative potential!

    Details
    Sequentix Cirklon basic--9-
    former retail price €1,091.60 (VAT excl.) No longer available!
  19. Hackme Electronics - Vectr (silver front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!
  20. Erica Synths - Fusion Delay & Chorus (v1)

    Not in production anymore.

    Analog tube effect module based on a bucket brigade delay chip. It combines the wide, deep delay and chorus effect with the characteristic sound of a tube saturation. Modulation of delay time is possible by CVs or the integrated LFO.

    Details
    Erica Synths - Fusion Delay & Chorus
    former retail price €289.92 (VAT excl.) No longer available!
  21. Plankton Electronics - The Earwig

    Discontinued. SALE of the very last unit (as long as stock lasts).

    The Earwig module is a recifying mixer or a mixing dual rectifier, up to you. It offers two channels with gain control, four ways of rectification, inversion and two offset controls; the channels can be used individually for processing CVs and audio signals but the additional mixing function gives you the sum and the difference of both channels.

    Details
    Erica Synths - Matrix Mixer front
    former retail price €176.47 (VAT excl.) No longer available!
  22. Plankton Electronics - The Jellyfish desktop

    Not in production anymore. SALE of the very last unit (as long as stock lasts).

    The Jellyfish is a great sounding dual digital delay with two individual delay sections. Each contains a LFO or CV inputs for modulating the delay time, separate wet and dry controls, feedback etc. Really impressive is the cross-delay function where both delays interact. In parallel mode pseudo-stereo is possible.

    Details
    /
    former retail price €243.70 (VAT excl.) No longer available!
  23. Orthogonal Devices - ER-102 (Nostalgia)

    We will not be getting this unit anymore because OD has stopped reselling to dealers. Please buy directly.

    The ER-102 expands the already vast number of possibilites of the ER-101 sequencer by awesome functions. Within one snapshot you can now generate parts and recall these via CVs, also you can generate groups of steps that can be transformed and modulated. The recording function e.g. allows for real-time recording and overdubs. Storage and firmware updates vie memory cards is possible as well.

    Nostalgia version with white print on dark grey powder coated faceplate.

    Details
    Orthogonal Devices - ER-102 (People's Choice)
    former retail price €469.75 (VAT excl.) No longer available!
  24. Sputnik Modular - Quad VCF/VCA

    The module is a four-fold combination of lowpass filters and/or VCAs. It's functions are extended by three different mix outputs.

    Details
    Make Noise Multimode Gate--9-
    former retail price €247.90 (VAT excl.) No longer available!
  25. Sputnik Modular - West Coast Random Source

    The West Coast Random Source is a clone of the reverend mother of random, the Buchla 266 Source Of Uncertainty. It generates noise in three timbres, sample & hold, then fluctuating, quantized and stored random voltages and finally an slew limiter. It might be a large module but you won't get more random of all shades from one single module.

    Details
    Sputnik Modular - West Coast Random Source
    former retail price €247.90 (VAT excl.) No longer available!
  26. Sputnik Modular - Oscillator

    Phase-out module. Few in stock. Sales only as long as stock lasts.

    Analog VCO, probably inspired by the Buchla 258. It features frequency modulation, two direct waveform outputs, sub oscillator and a voltage controlled waveshaper, both with individual outputs.

    Details
    Doepfer A-110-2 Basic VCO
    former retail price €209.24 (VAT excl.) No longer available!
  27. Sputnik Modular - 6-Channel Stereo Mixer (v2)

    Phase-out module. Few in stock. Sales only as long as stock lasts.

    Six-channel mixer module with panning (even with voltage control on two channels), mute function, a headphone out and main outputs with VU meters. Intended to be used as a final mixer in your system.

    Version 2 is a revision of the original analog circuitry to get rid of the annoying bleedthrough.

    Details
    ADDAC 703 Discrete Mixer--front
    former retail price €209.24 (VAT excl.) No longer available!
  28. Sputnik Modular - Quad Function + Trigger Source

    Phase-out module. Few in stock. Sales only as long as stock lasts.

    This module contains four voltage controlled function generators that can be used in pairs, in order to mix them and additionally to create more complex envelopes in quadrature mode. Each channel can be used as an AD envelope or as LFO and also generates pulses.

    Details
    Intellijel designs quADra--9-
    former retail price €247.90 (VAT excl.) No longer available!
  29. Dave Smith Instruments - DSM02 Character

    The Character section from the DSI Pro2 and Prophet 12 as Eurroack module. It is a digital ,votage controllable effect module which contains sample rate reduction, bit crushing, distortion as well as low and high frequency enhancement. From subtle to harsh effects, everything is possible. It can be used mono and stereo and runs with 24Bit and 96kHz.

    Details
    Doepfer A-189-1 VC - bit crusher
    former retail price €240.34 (VAT excl.) No longer available!
  30. Grendel - Grenadier

    The Grenadier is a enthralling, semi-modular analog synthesizer with an uncommon sequencer, a keypad, a drone mode and crossmodulation between VCO and the resonant formant filter.
    External control is possible by CV and Gate signals only which is the reason why the Grenadier has several 3.5mm sockets.

    Details
    Grendel - Grenadier
    former retail price €503.36 (VAT excl.) No longer available!
  31. Qu-Bit Electronix Nano Rand (silver)

    Small, multi-functional and in first line musical random module with four selectable random algorithms, sample & hold, noise and random gates The Nano Rand can be clocked either internally or externally.

    Details
    Doepfer A-118  Noise / Random--9-
    former retail price €158.82 (VAT excl.) No longer available!
  32. Erica Synths - Fusion VCF (v1)

    Resonant, voltage controlled tube lowpass filter with a wide range of sonic possibilities from juicy tube sound over extreme, distorted sounds up to self-resonating screams.

    Details
    Manhattan Analog MA35 VCF/A--9-
    former retail price €284.87 (VAT excl.) No longer available!
  33. Erica Synths - Fusion V1 tube heater power supply (220V)

    Small 6V AC power supply which must be installed if you want to use Erica Fusion V1tube modules. Advantage is that the tubes won't draw energy from your main Eurorack power supply when heating up.
    One Fusion V1 power supply can provide enough energy for the heaters of up to seven Fusion V1 tube modules.

    Details
    Synovatron ASm2Db-1-
    former retail price €25.21 (VAT excl.) No longer available!
  34. Medic Modules - EKG

    The EKG is a versatile analog sequencer module with a funky voltage controllable halftime function and not less than eight selectable functions per step (pause, skip, up to 4x repeat, reverse, reset).

    Details
    Medic Modules - EKG -- front
    former retail price €251.26 (VAT excl.) No longer available!
  35. Dave Smith Instruments - DSM01 Curtis Filter

    THE legendary Curtis filter from the Sequential Circuits Prophet-5 and Dave Smith's other instruments, now officially released as an Eurorack module by the master himself.
    Resonant low pass filter with selectable slope, 12 or 24db/octave, selectable overdrive and an integrated VCA.

    Details
    Dave Smith Instruments DSM01 Curtis Filter
    former retail price €165.55 (VAT excl.) No longer available!
  36. Erica Synths - Matrix Mixer

    Truly deluxe matrix mixer with touchscreen operation, 250 memory slots and buffered outputs. Several presets can be chained and sequentially switched with a clock signal

    Details
    Erica Synths - Matrix Mixer front
    former retail price €385.71 (VAT excl.) No longer available!
  37. Synthrotek - Echo

    Compact, voltage controlled and affordable effect module for creating echos, delays and reverbs. A must for your system, especially regarding the price!

    Details
    Synthrotek Echo - front
    former retail price €92.44 (VAT excl.) No longer available!
  38. Buchla 259e Twisted Waveform Generator

    Nearly identical to the original Buchla 259 dual oscillator but with a twist. It differs from the 261e in the timbre section which is not a wave multiplier bu a crazy self-modifying waveshaper that screeches and gnarls...

    Details
    Pittsburgh Modular - Oscillator--9-
    former retail price €1,369.75 (VAT excl.) No longer available!
  39. Audio Damage - Sequencer 1

    Intuitive live sequencer module that produces notes, gates and 3 tempo-synchronised CVs. It offers various clocking options, both input- and output-wise. SD-card memory (4x16 sequences), sequence length up to 64 setps, ratcheting, step repeat, slide, variable gate time per step, integrated mini keyboard with octave switches for easy and precise programming and so many more.

    Details
    Audio Damage ADM06 Sequencer 1
    former retail price €587.40 (VAT excl.) No longer available!
  40. Circuit Abbey - Axis

    A pre-amplifier module specially designed for the use with guitars. It comes with a three-band equalizer and can be used both with active or passive guitars. The sound is transparent but it can clip nicely.

    Details
    Circuit Abbey - Gozinta
    former retail price €163.87 (VAT excl.) No longer available!
  41. QU-Bit Electronix Nebulæ (silver front)

    Nebulæ is an audio sample player or granular oscillator in the Eurorack modular synthesizer format. It uses sound files as the source material for creating loops, melodies, granular clouds, drones, pads and otherworldy textures. It is also capable of acting as a classic keyboard style MIDI sampler/drum sequencer while in one-shot mode.

    Version with silver front panel.

    Details
    Make Noise Phonogene (v.372)--9-
    former retail price €411.76 (VAT excl.) No longer available!
  42. Hackme Electronics - Vectr (black front)

    A new, touch-free, 3D controller working with precise and fluid cutting-edge sensor technology. At the same time it's a multi-track sequencer with loopable gesture record function, overdub, gesture control of playback, quantization and much more.
    The module has been developed with the idea of a centerpiece for a whole modular system in mind, with opertaion modes ranging from simple to very deep but still remaining intuitive.

    Details
    Hackme Electronics - Vectr
    former retail price €407.56 (VAT excl.) No longer available!
  43. Pittsburgh Modular - Move [104] case

    Mobile Eurorack flightcase with durable black coating, nickel plated steel corners and removable lid. Inner width of 104HP, inner depth 62-70mm, 850mA power

    Details
    Pittsburgh Modular - Move [104]
    former retail price €289.92 (VAT excl.) No longer available!
  44. Buchla 281e Quad Function Generator

    A function generator can be a modulation oscillator or an envelope generator, depending on the mode. The 281e contains four function generators organized in two pairs. Each pair can be used in quadrature mode for generating more complex CVs and it can be combined by a OR cicruit.

    Details
    Pittsburgh Modular - Oscillator--9-
    former retail price €689.08 (VAT excl.) No longer available!
  45. Buchla 292e Quad Dynamics Manager

    The 292e is a quad lopass gate. This is a circuitry that can be used as a lowpass filter, as a VCA or as a particularily naturally sounding combination of both. A mix function is integrated as well.
    It's pretty identical to the original 292 but features additionally velocity control and parameter storage.

    Details
    Pittsburgh Modular - Oscillator--9-
    former retail price €773.11 (VAT excl.) No longer available!
  46. Pittsburgh Modular - Analog Replicator

    The Analog Replicator is a new module built from scratch, way better than the old "Analog Delay" module. With up to 8192 bucket-stages and two time ranges delays from 12ms to 2.6s are possible. Everything from short flangings over dense feedback to thrashy long delays is possible. Invertable feedback, voltage control of three parameters, bypass and a neat spillover function put the cherry on top.

    Details
    Pittsburgh Modular - Analog Replicator
    former retail price €310.08 (VAT excl.) No longer available!
  47. Pittsburgh Modular - MIDI3

    Pittsburgh's 3rd generation MIDI/CV interface features monophonic or duophonic modes, assignable CCs, a velocity output and even a Tap Tempo function. The best and really outstanding feature is the arpeggiator which interacts with MIDI clock, can be synched to an external clock or can even log to the tap-tempo clock! Finally someone implemented this!

    Details
    Pittsburgh Modular - MIDI3
    former retail price €214.29 (VAT excl.) No longer available!
  48. Mungo Enterprises - v0 Vocoder

    The v0 is a spectral processor which can be used as a vocoder or bandpass filter. Features like an envelope respectively envelope follower, its freeze function and several control voltage inputs turn this module into a powerful tool for sound design.

    Details
    Doepfer A-128  Fixed Filterbank
    former retail price €503.36 (VAT excl.) No longer available!
  49. Mungo Enterprises - w0 Arbitrary Oscillator

    Digital oscillator with a huge frequency range and the possibility to read your own waveforms in .wav format from a SD card in addition to the internal wave forms. Ultra-stable tracking due to it's digital core make it perfect for FM sounds. Phase and symmetry of the waveforms can be voltage controlled.

    Details
    Mungo Enterprises - w0
    former retail price €503.36 (VAT excl.) No longer available!
  50. Endorphin.es - Terminal

    The Terminal will show you the way to your gate ... erm, pardon, it combines tow lopass-gates with two voltage controlled function generators and an internal small stereo-mixer with panning and a headphone output. A voltage controllable digital reverb complements the features of this multi--functional module.
    Bonus points go to Endorphines for creative, aviation-inspired artwork and legending :)

    Details
    Make Noise Function--9-
    former retail price €462.18 (VAT excl.) No longer available!
  51. Synthrotek - Nandamonium

    A dual drone monster with echo and voltage control, that's what Synthrotek's Nandamonium is about. It consists of two NAND synthesizer circuits with three oscillators each and a great delay you might know from their "Echo" Eurorack module.

    Details
    Analogue Solutions TELEMARK--9-
    former retail price €226.05 (VAT excl.) No longer available!
  52. Audio Damage - Odio

    Odio is a very functional 2-IN 2-OUT USB audio interface that runs at modular audio levels, designed primarily for use with iOS devices but it works also with Windows and Linux.
    Easily integrate iPad effects and instruments in to your modular rig. Use a netbook/tablet and a simple host to use VST plug-in effects as inserts in your modular.
    The Odio's outputs are DC cupled and can emit CVs.

    Details
    AJH Synth - MiniMod Glide/Noise
    former retail price €251.26 (VAT excl.) No longer available!
  53. Frap Tools - UNO 84 powered (Beech wood)

    No longer available in beech wood

    Portable and foldable Eurorack case with three rows á 84 HP width and a depth of up to 90 mm! In this simple yet well-thought metal case with Beech wood sides all screws and folding mechanisims are hidden and there are slots for internal busboard cabling. The case meets hand luggage requirements of most major airlines. High-precision Italian manufacturing.
    The UNO 84 contains the SILTA power supply solution with 3.75 Ampere and is supplied with a padded soft bag.

    Details
    Tiptop Audio Station 252 Black Widow--9-
    former retail price €1,385.71 (VAT excl.) No longer available!
  54. Erica Synths - Skiff (6 U)

    Erica's Skiff is a flat Eurorack case made of aluminium, offering two rows of 84HP width and an usable depth of 50mm. It has an integrated power distribution but you can choose between two separately available external power supplies.
    Optionally you can expand the case by rack ears or wooden side panels.

    Details
    Doepfer Mini Case roh/raw 32TE
    former retail price €264.71 (VAT excl.) No longer available!
  55. Erica Synths - Skiff PSU, 1,25A (220V only)

    Solid power supply for the Skiff by Erica Synths. It works with a proper toroidal transformer, bringing a little more weight on the scale but that shouldn't matter in the studio.

    Details
    Pittsburgh Modular - single wood panels
    former retail price €113.45 (VAT excl.) No longer available!
  56. Erica Synths - Skiff PSU, 2,5A (dual)

    The biggest of the three external power supplies for Erica's Skiff provides 2.5A, which is enough current for two cases. It also has two power connectors - so if you plan to use two Skiffs sooner or later, go for this one to prevent having two supplies in the studio.

    Details
    Pittsburgh Modular - single wood panels
    former retail price €130.25 (VAT excl.) No longer available!
  57. Erica Synths - spare wood panels for Skiff

    Spare wooden side panels for one Skiff by Erica Synths.

    Details
    Pittsburgh Modular - single wood panels
    former retail price €20.17 (VAT excl.) No longer available!
  58. Erica Synths - Rack ears

    A set of two 6U rack ears for the Eurorack cases of Erica Synths

    Details
    Pittsburgh Modular - single wood panels
    former retail price €15.13 (VAT excl.) No longer available!
  59. The Harvestman - Double Andore MkII

    The Double Andore's Mk2-version is also a dual digital envelope, featuring a cycle mode, digital waveshaping, integrated VCAs and cross modulations betweeen channels.
    In comparison to the Mk1 the new version is much more reliable and stable but has been improved in a number of ways and the face plate layout is more comprehendible.

    Details
    The Harvestman Double Andore--9-
    former retail price €399.16 (VAT excl.) No longer available!
  60. Mungo Enterprises - g0 Granular processor

    The g0 is a high-end granular processor, which can manipulate audio signals in various ways. Pitch, playback position and speed as well as the size of the audio window are individually adjustable. Raw material can be fed into the module in real-time or by SD card. No matter if you want to stretch audio material, chop it up rhythmically and rearrange it or just create wild grain chaos, this is the module for you.

    Details
    Audio Damage - Grainshift
    former retail price €503.36 (VAT excl.) No longer available!
  61. Mungo Enterprises - r0 Reverb

    While many reverb modules have only "size" and "feedback" parameters and sometimes include a filter, the r0 uses a more complex and pretty unique approach. It models a room with adjustable size, width and decay time in which you can position the object separately from the pick-up/microphone. Pretty much like in a echo chamber, only with the difference that you can create extreme and unnatural rooms with the r0.

    Details
    CG Products - Delay1022 Mk2
    former retail price €503.36 (VAT excl.) No longer available!
  62. Niio Analog - ROOM (Bundle with 19" rack)

    Contrary to it's name the ROOM is no reverb effect but an enitrely analog audio processor to shape and dynamically modulate the sound and spatial field of a connected stereo reverb by the dynamics of the mono audio source. For modulation duties the ROOM has an envelope follower and an envelope generator that can react to the audio material or to external CV and gate signals.

    Details
    Niio Analog Iotine Core 2
    former retail price €1,873.11 (VAT excl.) No longer available!
  63. NAZCA - braided patchcords (18-Pack)

    The braided Nazca patchcords combine flexibility with pleasant surface feel, having a nice arc retention due to their thickness.
    The pack of eighteen contains each nine cables in 33cm and 60cm, with two colors per length.

    Details
    Nazca sixpack
    former retail price €49.58 (VAT excl.) No longer available!
  64. Analogue Systems / Cliff - 15cm patchcables (5-Pack)

    Set with five quality patchcords by Cliff, 15cm long. Each one cable in green, yellow, blue, red and white.

    Details
    /
    former retail price €10.92 (VAT excl.) No longer available!
  65. Erica Synths - Fusion Ringmod (v1)

    Not in production anymore.

    This is not the first tube ring modulator in Eurorack form factor but probably one of the smallest. It uses a 6ZP1 pentode tube which reacts quickly to CVs and clearly has a tubish sound without being too extreme. Use the module as a ring mod, as a VCA or just for adding some tube flavour to your audio.

    Details
    Pittsburgh Modular - Modulator RingMod--9-
    former retail price €172.27 (VAT excl.) No longer available!
  66. Erica Synths - Fusion VCO Mixer (v1)

    This module contains two three-channel tube mixers which have been designed specially for direct mixing of VCO waveforms. Because of the tube sound and it' saturation behaviour this module can be used as a fine waveshaper, which can sounds pretty brutal when 3 VCOs are mixed at high levels. Especially living waveforms with constantly changing harmonic content like PWM will be heavily processed by the tube.

    Details
    Doepfer A-138u Dual Micro Mixer (2x3)
    former retail price €289.92 (VAT excl.) No longer available!
  67. Black Market Modular - Colour Palette

    This module is a small revolution as it integrates a modular idea from recording gear into Eurorck. It makes it possible to use up to three interchangeable saturation Colour circuit boards from the "Colour 500-Series Palette", an API 500 form factor device, into Eurorack. With voltage control of level, and with the prospective ColourCV boards even with voltage control of parameters!
    Well, it's a module with a modular idea behind it, interchangeable timbres like saturation of transformers, behaviour of vintage audio gear to effect simulation.

    Details
    Black Market Modular - Colour Palette
    former retail price €251.26 (VAT excl.) No longer available!
  68. Erica Synths - D-Tech VCF

    Versatile clone of the russian Polyvoks synthesizer's filter with some fancy extras. The resonance is voltage controllable, both the filter slope of the lowpass respective the bandpass width is adjustable with a potentiometer as is the resonance behaviour. With these functions the D-Tech filter can produce both smooth, ballsy sound but also Polyvoks resonant screams, so typical for the Polivoks. Have it your way. And the module is really adequate for creating very wonderful, wooden drum sounds by "pinging" the filter.

    Details
    Manhattan Analog MA35 VCF/A--9-
    former retail price €180.67 (VAT excl.) No longer available!
  69. Circuit Abbey - Twiggy

    Two clean ring modulators in just two HP? Skinny Twiggy makes it possible!

    Details
    Circuit Abbey - Twiggy
    former retail price €91.60 (VAT excl.) No longer available!
  70. Circuit Abbey - VacVac

    VacVac contains two VCA circuits working with Vactrols. Those who like to have the oganic percussive behaviour of a lopass gate in a true VCA, but search for something smaller and simpler than an Optomix might like this module.

    Details
    Trogotronic 277M Dual tube VCA--9-
    former retail price €159.66 (VAT excl.) No longer available!
  71. Mungo Enterprises - d0 Delay

    Voltage controlled two-channel digital delay module with delay times of .2mS to 2S. It tracks 1V/octave CVs, pitch and even offer clock synchronisation. For tuned feedbacks an autotune function is available.

    Details
    CG Products - Delay1022 Mk2
    former retail price €503.36 (VAT excl.) No longer available!
  72. Mungo Enterprises - n0 Noise

    Describing the n0 as a noise generator is a complete understatement! Yes, it can do noise and this over a huuuuge frequency range but this module from Mungo's Zero series can be way more: a random generator, variable waveshaping oscillator, clock divider, tepmo-synchronized LFO, slew limiter, filter and a S&H or T&H! A swiss army knife of the digital kind.

    Details
    Doepfer A-118  Noise / Random--9-
    former retail price €419.33 (VAT excl.) No longer available!
  73. Mungo Enterprises - p0 Percussion

    The p0 is a world class drum generator, which uses physical modeling to create sound. Specialties of the circuit are metallic instruments like hi-hats or cymbals. However, it is also possible to create bongos, toms and even kicks. Besides that, thanks to a clever parameter selection, the module can generate lots of extraordinary, partly psychedelic sounds. Control voltage inputs allow musicians to compose interesting rhythms with just one p0.

    Details
    Tiptop Audio Hats808 - TR 808 HiHats--9-
    former retail price €503.36 (VAT excl.) No longer available!
  74. Synthrotek - DLY (Delay)

    Just like his small brother, the Echo, also the DLY is built around the same semi-digital bucket-brigade IC (PT2399) and thus has a similar character. But it has been improved in a few points, is more useful as a delay and has a dry/wet function now.
    Doesn't cost much, sounds metalllic and really good, unless you reach the IC's extreme ranges where interesting artifacts happen. :)

    Details
    Synthrotek Echo - front
    former retail price €113.45 (VAT excl.) No longer available!
  75. Analogue Solutions SD88 - TR808 Snare

    Not in production anymore.

    Analogue Solutions SD88 is a faithful reproduction of Roland´s TR-808 snare drum with a few extras.

    Details
    Analogue Solutions SD88 - TR808 Snare--9-
    former retail price €96.64 (VAT excl.) No longer available!
  76. Alyseum MS-812 (Eurorack)

    The MS-812 by Alyseum is an Eurorack module which creates the gateway between your CopperLan network and your Eurorack modular system.

    The high number of CV and digital outputs gives you a very powerful MIDI-to-CV/Gate interface which can also carry clock outputs or can work as a MIDI-to-Sync24 converter. The module can be controlled by several computers in your network simultaneously.

    Details
    Alyseum MS 812 Eurorack module
    former retail price €306.72 (VAT excl.) No longer available!
  77. Bubblesound - cvWS Waveshaper

    Der cvWS is a dualer wave shaper like the one found in the core of the uLFO. The upper unit creates a sawtooth out of sruare and triangle wave, the lower unit makes sine waves. Sounds boring? Then try to FM-modulate it for interesting effects!

    Details
    Bubblesound cvWS waveshaper--9-
    former retail price €116.81 (VAT excl.) No longer available!
  78. Bubblesound LvL rm

    The LvL rm is a handy module as it contains a quad offset generator and also an analog ring modulator.
    Details
    Bubblesound lvl rm Ringmodulator
    former retail price €116.81 (VAT excl.) No longer available!
  79. Bubblesound SEM20 V|S|F Multimode filter

    Self-oscillating 2pole state variable filter, 12dB highpass, lowpass and notch, 6dB bandpass, extra control for notch balance

    Details
    Bubblesound SEM 20 VSF--9-
    former retail price €166.39 (VAT excl.) No longer available!
  80. Bubblesound - uLFO Module

    This LFO packed with features bases on a "triangle core" VCO and thus is on a par with any full-fledged analog VCO because the 1V/oct input allows for using it as a normal VCO. The tracking ranges a few octaves which is far from bad. There are six different waveform outputs: ramp, pulse, sine, triangle, saw, square and sine shape. All this makes the uLFO one of the most versatile LFOs no the market.

    Details
    Bubblesound uLFO--9-
    former retail price €209.24 (VAT excl.) No longer available!
  81. Bubblesound VCOb

    Bubblesound´s VCOb is a really good, rich sounding, stable yet compact fully analog VCO. It´s circuitry is based on the uLFO but with some improvements. It tracks well 4-6 octaves (depending on how picky you are) which is good.

    Details
    Bubblesound VCO b--9-
    former retail price €184.03 (VAT excl.) No longer available!
  82. Patchkabel ? 6,3KMW ? 6,3KMW / 0,15m ? 6stk. ? PVC

    6 coloured unsymetric 1/4" mono jack patch cabels with 2 PVC angle plugs.

    Details
    Patchkabel - 6,3KMW - 6,3KMW / 0,15m - 6stk. - PVC--9-
    former retail price €6.72 (VAT excl.) No longer available!
  83. Circuit Abbey - ADSRjr Expander

    The expansion module for the ADSRjr by Circuit Abbey adds serveral features to the main module: voltage control of envlope segment times, directly switchable curve characteristics and additional outputs.

    Details
    Circuit Abbey - ADSRjr Expander
    former retail price €71.43 (VAT excl.) No longer available!
  84. Circuit Abbey - Gozinta

    Circuit Abbey Gozinta gives you two separate adjustable preamplifier units to boost the level of any line signal to modular level. The thing sounds clean because of the use of high quality, clean and supermodern amplifier ICs.

    Details
    Circuit Abbey - Gozinta
    former retail price €96.64 (VAT excl.) No longer available!
  85. Circuit Abbey - Gravity Well

    The Gravity Well is an unusual Eurorack module that asymetrically warps signals. This happens on several axis with different strengths. Imagine the input signal being an object circulating around a heavenly body. CVs can change the circular path by altering the body´s strength of gravity, vayring the gravity field and affecting the north-south and the east-west magnitudes.

    Details
    Circuit Abbey - Gravity Well--9-
    former retail price €214.29 (VAT excl.) No longer available!
  86. Circuit Abbey - Invy

    Single unit

    Invy is a dual voltage procressor for attenuating and inverting signals and for creating offset voltages. Normalizing and mixing features allow for a number of applications.

    Details
    Circuit Abbey - Invy
    former retail price €96.64 (VAT excl.) No longer available!
  87. Circuit Abbey - TripFire

    The TripFire Eurorack module by Circuit Abbey is a very handy, compact dual module. The top unit is a comparator for extracting gates from external signals, the bottom unit is a gate- or trigger-delay and thus the module is excellent for creating rhythmical signals, trigger envelopes etc.

    Details
    Circuit Abbey - TripFire
    former retail price €142.02 (VAT excl.) No longer available!
  88. Alyseum ALeX

    The AleX from Alyseum is a MIDI-to-CopperLan interface for retrofitting your MIDI devices with a CopperLan connector. It is designed to integrate your MIDI gear into the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

    Details
    Alyseum ALeX--9-
    former retail price €66.39 (VAT excl.) No longer available!
  89. Alyseum AL-88

    The AL-88 is a MIDI-to-CopperLan interface, i.e. it is used to integrate your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers. Up to 16 MIDI cables can be connected (8x MIDI-In and 8x MIDI-Out)

    Details
    Alyseum AL-88--9-
    former retail price €419.33 (VAT excl.) No longer available!
  90. Analogue Solutions TM88 - TR808 TomTom

    Not in production anymore.

    Analog Eurorack drum module with the circuitry of the Roland TR-808 TomToms wit additional noise parameter

    Details
    Analogue Solutions TM88 - TR808 TomTom--9-
    former retail price €78.99 (VAT excl.) No longer available!
  91. Analogue Solutions Adaptor

    Small, passive adaptor module containing two adapters from 3.5mm jack to 6.3mm (1/4") jack.

    Details
    Analogue Solutions Adaptor--9-
    former retail price €41.18 (VAT excl.) No longer available!
  92. Analogue Solutions CVM2 CV-to-MIDI

    Analogue Solutions CV-to-MIDI converts two channels of CV and gate information into MIDI note commands.

    Details
    CVM2 CV-to-MIDI
    former retail price €105.04 (VAT excl.) No longer available!
  93. Analogue Solutions CVT

    The module generates 8 trigger signals at 8 jacks in dependancy ofthe value of an incoming voltage.

    ATTENTION: the module needs an additional 5V operational voltage!

    Details
    Analogue Solutions CVT CV-to-Trigger
    former retail price €105.04 (VAT excl.) No longer available!
  94. Analogue Solutions - HP01

    The HP-01 is an useful audio output module with adjustable master output and headphone output. The three input socket make mixing a number of signals possible.

    Details
    Analogue Solutions HP01
    former retail price €83.19 (VAT excl.) No longer available!
  95. Analogue Solutions LFO2 (6HP)

    Simple and narrow LFO module with two wave forms.

    Details
    Analogue Solutions LFO2 6HP--9-
    former retail price €105.04 (VAT excl.) No longer available!
  96. Analogue Solutions MT9 MIDI to Gate

    The MT9 is an advanced MIDI to triggering module. It allows triggering of a range of analogue devices; drum voice modules, envelope modules, analogue sequencers, analogue drum machines, and anything else with a gate, trigger or clock input.

    Details
    Analogue Solutions MT9  Midi to Trigger--9-
    former retail price €116.81 (VAT excl.) No longer available!
  97. Analogue Solutions MX224 Mixer

    The MX224 is a 2 input mixer, inverter and buffer. It can mix audio, control voltages and gates with multiple normal and inverted outputs. Ideal for buffered multiplying signals with no signal drop.

    Details
    Analogue Solutions MX224 Mixer
    former retail price €74.79 (VAT excl.) No longer available!
  98. Analogue Solutions - VCO 6HP

    Affordable and simple basic VCO is 6HP width featuring the most inportant functions. It has CV inputs for frequency and pulse width, waveformwise we´ll find sawtooth and pulse.

    Details
    Analogue Solutions VCO 6HP--9-
    former retail price €91.60 (VAT excl.) No longer available!
  99. Atomosynth Krakken

    We don't carry this product anymore.

    Peruvian manufacturer Atomosynth´s new KRAKKEN synth is a very compact analog keyboard synthesizer with a floor space smaller than a vinyl record´s cover.The new version v1.2 now has a sturdy black metal case instead of the toxic green acrylic case.
    With two VCOs, an aggressive lowpass/highpass filter and integrated glide the Krakken can generate classic monophonic leads, acid basslines and also crazy analog sounds.

    Details
    AtomoSynth Krakken V1.2
    former retail price €411.76 (VAT excl.) No longer available!
  100. AtomoSynth Mochika XL v2.2

    We don't carry this product anymore.

    Analog monophonic synthesizer with an eight-step analog sequencer that can be synchronized to MIDI. One VCO and a rough/dirty sound make the Mochika XL perfect for nasty basslines.

    Details
    AtomoSynth Mochika XL v2.2
    former retail price €217.65 (VAT excl.) No longer available!
  101. Alyseum AL-22

    The AL-22 is a MIDI-to-CopperLan interface, i.e. it allows you to use your MIDI devices in the CopperLan network. It uses the Ethernet network to transport MIDI flows between any CopperLan compliant hardware or software applications in computers.

    Details
    Alyseum AL-22--9-
    former retail price €147.06 (VAT excl.) No longer available!
  102. Circuit Abbey - Unify

    UNIFY is a high quality, four channel Stereo mixer module with selectable output level, panorama pots per channel and a headphone output with separate level control. It´s very well suited as the final mixer in your Eurorack system.

    Details
    Circuit Abbey - Unify
    former retail price €239.50 (VAT excl.) No longer available!
  103. Adapter Curetronic module -> Dotcom power

    Power adaptor plug for connecting a Curetronic module to a synthesizers.com power distribution harness.

    Details
    Adapter Curetronic module -> Dotcom power--9-
    former retail price €6.30 (VAT excl.) No longer available!
  104. Moog Etherwave Theremin black

    The high-quality theremin gives five octaves pitch and adjustable pitch range for good and customisable playability. The black painted hardwood body has a thread underneath which allows mounting on a conventional microphone stand (thread size adaptor may be necessary). Beyond this the unit has removable chrome plated antennae, analog controls for adjusting pitch, output volume, waveform and timbre plus a 6.3mm (1/4") audio output jack.

    Details
    Moog Etherwave Theremin Schwarz B-WARE
    former retail price €335.29 (VAT excl.) No longer available!
  105. Minimoog Voyager RME (Rackmount Edition)

    Not in production anymore

    Voyager Rackversion with 896 sounds now, the rackmount kit for moogsounds to play on as a compact use of a real synth.

    Details
    Minimoog Voyager RME (Rackmount Edition)
    former retail price €2,520.17 (VAT excl.) No longer available!
  106. Minimoog Voyager RME (Wooden Cheeks)

    2 wooden cheeks for the Moog Minimoog Voyager RME (rack mount edition).

    They cover the 19" mounting holes and add a more classic look to your RME.

    Details
    Minimoog Voyager RME (Holzseitenwangen)
    former retail price €66.39 (VAT excl.) No longer available!
  107. Minimoog Voyager Select Series

    The Voyager with a backlit color of your choice combined with an individual kind of wood is probably the highlight for furniture fetish people in between the synthesizer nerds. This standard model of the luxury version is shipped in Eschenholz (?) combined with blue backlight, all other combinations are declared as an extra, please choose the extra costs and give us your choice, we will get it done somehow, thank you.

    Details
    Minimoog Voyager Select Series
    former retail price €2,428.57 (VAT excl.) No longer available!
  108. Minimoog Voyager SELECT w/special casing and color

    Choice of display backlight: Lunar (white); Solar (orange); Fire (red); Jade (green) and Electric Blue (blue)

    choice of wood: Walnut, Mahagoni, Cherry, Maple, White, Black. Please give us your selection with your order per mail, thank you.

    Details
    Minimoog Voyager Select SONDER- Gehäuse, Farbe--9-
    former retail price €108.40 (VAT excl.) No longer available!
  109. Moog VX-352 Voyager CV Input Expander f. RME

    Expander for the Moog Voyager RME. With this unit many MIDIgenerated parameters can be send out to external devices.

    Details
    Moog VX-352 Voyager CV Input Expander f. RME
    former retail price €318.49 (VAT excl.) No longer available!
  110. EoWave Domino

    The EoWave Domino is a compact monophonic analog synthesizer with discrete circuitry for an affordable price.

    Highlights are the eight-step sequencer and the arpeggiator.

    Details
    EoWave Domino
    former retail price €234.45 (VAT excl.) No longer available!
  111. eowave MAGMA

    The last unit for a super low special price!

    The MAGMA, which was called Koma in its prototype stadium, is an analog bassline synthesizer with integrated sequencers, memory and a Roland type low pass filter.

    Details
    EoWave Magma synthesizer--9-
    former retail price €545.38 (VAT excl.) No longer available!
  112. Eowave EoMono

    EoMono, the little brother of the EoBody2 is the first USB plugandplay sensor interface of this kind. It gives  you connection for one sensor. This way you can start with sensor applications easily and for a small price. Just control your software´s parameter assigned by yourself with a desired sensor.

    Eowave Eomono is compatible with all MIDI softwares! No additional MIDI interface is needed.

    Details
    Eowave EOmono
    former retail price €46.22 (VAT excl.) No longer available!
  113. EoWave Ribbon Synth

    The EoWave Ribbon is not only a ribbon controller but also a standalone instrument. It contains a digital LoFi-synth with one VCO and frequency modulation.
    Besides of that the unit can be used as a controller both for USB-MIDI and control voltages!

    Details
    EoWave Ribbon Synth--9-
    former retail price €192.44 (VAT excl.) No longer available!
  114. Eowave movement controller

    A movement tilt switch. This movement sensor will not detect accelerations but x,y position.

    artikel for use and in combination with EoBody2 interface.

    Details
    Eowave movement controller--9-
    former retail price €15.97 (VAT excl.) No longer available!
  115. Eowave 2D G-force controller

    A two-direction accelerometer sensor. Measures dynamic acceleration (or deceleration) and inclination simultaneously and in two dimensions . Different models exists and enables to detect from /-2 G acceleration ; /- 5 G acceleration or /- 18 G acceleration.

    Item for use and in combination with EoBody2 interface.

    Details
    Eowave 2D G-force controller--9-
    former retail price €62.18 (VAT excl.) No longer available!
  116. Moog - Moogerfooger MF-107 FreqBox

    The MF-107 FreqBox(tm) is different from other effects ? the effected sound is not a processed version of your input signal, but the sound of the input signal modulating an internal oscillator. It contains a VCO with continuously variable waveshape, and the capacity to modulate that Oscillator in the following ways: - the VCO can be hard synced by the input signal - The VCO can be frequency modulated (FM) by the input signal - The VCO frequency can be modulated by an envelope follower which tracks the dynamics of the input signal - The Amplitude of the VCO also tracks the dynamics of the input signal The FreqBox, like all moogerfoogers, works with any instrument to line-level input. In addition to the panel controls there are control inputs for use with expression pedals or control voltages and control outputs for interconnecting moogerfoogers like you would a modular synth.

    Details
    Moog Moogerfooger MF-107 FreqBox
    former retail price €377.31 (VAT excl.) No longer available!
  117. Moog Moogerfooger MF-105m MurF MIDI

    MuRF stands for Mutliple Resonance Filter. This Moogerfooger provides radical new possibilites of sound processing.

    The MurF consists of eight filters that are played sequentially and thus let pass only parts of the audio signal in a rhythmical pattern.

    Details
    Moog Moogerfooger MF-105m MurF MIDI
    former retail price €478.15 (VAT excl.) No longer available!
  118. Adapter Dotcom module -> Curetronic power

    One last in stock. Will not be re-ordered.

    Power adaptor plug for connecting a Dotcom module to a Curetronic power distribution board. Additional +5V needed by some modules is not supported.

    Details
    Adapter Dotcom module -> Curetronic power
    former retail price €6.30 (VAT excl.) No longer available!
  119. Curetronic 3U Eurorack adaptor

    The 3HE-Adapter module allows for mounting and powering 3U Eurorack modules in 5U modular systems!!

    Besides the possibility to mount Eurorack modules with a width of up to 20HP the 3HE-adapter also provides the correct operational voltages of /-12V and 5V.

    Details
    Curetronic 5HE C03-3HE-Adapter
    former retail price €113.45 (VAT excl.) No longer available!
  120. Cwejman S1 Rackmount Ears

    Spare 19" rack ears for your Cwejman S1Mk2 synth. In case you painted, drilled or lost your original ones. Details
    Cwejman S1 Rackmount Ears
    former retail price €31.93 (VAT excl.) No longer available!
  121. Cwejman MMF-1 multi-mode filter

    The MMF-1 is one of Cwejman´s best developments. It is a very clean and precise multimode filter partly featuring new filter types like a dual bandpass mode with adjustable spacing of filter peaks and also other filter types.

    Details
    Cwejman MMF-1
    former retail price €442.86 (VAT excl.) No longer available!
  122. Cwejman RM-2S Stereo-Ringmodulator

    Module is not in production anymore

    High-end stereo ring modulator with integrated phase shifted carrier oscillators. You can use it as a stereo device or as two mono ring modulators.

    Details
    Cwejman RM-2S--9-
    former retail price €377.31 (VAT excl.) No longer available!
  123. Cylonix Cyclebox

    New Cycleboxes will be abvailable early May 2012!

    The Cyclebox by Cylonix is a digital wavetable VCO. To be exact it is a dual oscillator with additional sub-oscillator and an extreme frequency range off 22 octaves (!). Besides that there are quadrature outputs, voltage controllable wavesahping and much more. Milions of sounds in one module!

    Details
    Cylonix Cyclebox
    former retail price €462.19 (VAT excl.) No longer available!
  124. Cylonix Cyclebox v2 Expander by Intellijel

    This small expander module for the Cyclebox V2 by Cylonix is manufactured by Intellijel and gives you direct access to some hidden extra functions integrated in the Cyclebox V2. Eight switches allow you for activating different modes like the LFO mode or Mega-Mode-Spread etc.

    Details
    Cylonix Cyclebox expander
    former retail price €67.23 (VAT excl.) No longer available!
  125. Division 6 Filtare SEIII

    The Filtaire SE III from US-american manufacturer Division 6 ist an outstanding analog, musically sounding State-Variable multimode filter with a slope of 24dB.

    Details
    Divison 6 Filtare SEIII--9-
    former retail price €222.69 (VAT excl.) No longer available!
  126. Dirty Electronics MUTE Synth

    Special price only as stock (of last 4 units) lasts.

    The Mute Synth by Dirty Electronics is an inexpensive hand-held touch and tilt instrument with copper etched artwork and contoured printed circuit board that was designed in collaboration with the legendary record label MUTE.

    A must for all MUTE fans and a perfect gift!

    Details
    Dirty Electronics MUTE synth--9-
    former retail price €63.03 (VAT excl.) No longer available!
  127. Elektron Analog Four

    Not in our portfolio anymore

    The name already indicates it: the Analog Four by Elekron continas four independent monophonic synthesizers in one unit. Besides the entirely analog voice circuitry with two oscillators and two filters per synth and plenty of modulation possibilities the Analog Four has FX and also a step sequencer that can output CV/gate signals as well.

    Details
    Elektron Analog Four
    former retail price €1,041.18 (VAT excl.) No longer available!
  128. Moog Moogerfooger MF-103 12-stage Phaser

    The MF-103 Phaser works with two so-called comb resonance filters. Depending on the amount of the internal phase shifter circuits it is called 6-stage or 12-stage.

    The 6-stage mode has 3 notches in the frequency spectrum while the 12-stage version has six of them. Both modes have distinct differences in sound. Additionally the MF-103 has a controllable feedback loop that increases the resonance or "depth" of the phaser sound. If this comb- or notch filter is being shifted thru the audio spectrum the typical "sweep sound" of the phaser is created.

    In- and outputs for CVs and pedals allow external control of the parameters.

    Details
    Moog Moogerfooger MF-103 12-stage Phaser
    former retail price €301.68 (VAT excl.) No longer available!
  129. Moog Moogerfooger MF-104m Analog Delay MIDI

    The Moogerfooger 104, the sought-after Analog Delay is back!

    Moog Music has found a bathc of the BBD chips responsible for the delay and re-releases the analog Delay in a revised version. Unfortunately the run is limited as are the chips but the unit has new features like tap-tempo, a LFO and the parameters can be controlled by MIDI.

    As supply of the chips still is ver hard according to Moog and the chips aren´t in production anymore, quantities of the Mf-104M are limited. Better be quick if you want one!

    Details
    Moog Moogerfooger MF-104m Analog Delay mi Midi--9-
    former retail price €671.43 (VAT excl.) No longer available!
  130. Eowave position ribbon sensor 10 cm

    This 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters. These 10 cm ribbon are also perfect to emulate faders. artikel for use and in combination with EoBody2 interface.

    Details
    Eowave position ribbon sensor 10 cm--9-
    former retail price €41.18 (VAT excl.) No longer available!
  131. 4ms pedals - Atoner module

    One last unit in stock.

    A versatile module used for distorting and bit crushing audio, generating polyrhythmic CV clocks, extracting lower harmonics from audio and pitch shifting/jumping (downwards)

    Details
    4ms Atoner module
    former retail price €247.90 (VAT excl.) No longer available!
  132. Doepfer A-101-9 Universal Vactrol Module

    The universal vactrol module makes voltage control possible on parameters not controllable before or only by manual control. Caution: soldering skills needed!

    Details
    Doepfer A-101-9 Universal Vactrol Modul
    former retail price €63.03 (VAT excl.) No longer available!
  133. Doepfer A-109 VC Signal processor

    -- The module is out of production and available while manufacturer´s stock lasts. Please ask for remaining stock (as of 4th of February 2013)--

    The A-109 combines a 24dB lowpass fiter, a VCA and a panning unit in one module. All sub-modules are connected internally via normalised sockets but can also be used separately.

    Details
    Doepfer A-109  VC Signal processor
    former retail price €100.84 (VAT excl.) No longer available!
  134. Doepfer A-111 High-End-VCO

    High end VCO with a wide frequency range and very stable tuning even without pre-heating. Additionally to the features of the A-110 you can find soft synchronisation, a fine tune control, claenaer waveforms and an input for linear frequency modulation (!).

    Details
    Doepfer A-111-1  High-End-VCO
    former retail price €268.91 (VAT excl.) No longer available!
  135. Doepfer A-111-5 Synthesizer

    not in production anymore

    The A-111-5 Module is an monophonic analog synthesizer voice in Eurorack format. Besically it´s a Dark Energy without the housing and the MIDI/CV interface.

    Details
    Doepfer A-111-5 Synthesizer
    former retail price €300.00 (VAT excl.) No longer available!
  136. Doepfer A-129-1& -2 Vocoder analysis/synthesis

    The modular vocoder subsystem consisting of the analysis section A-129/1 and the synthesis section A-129/2 provides one lowpass filter, 13 band passes and a high pass. Due to the open concept of this vocoder you can easily exchange the bands, e.g for creating a formant shift or for flipping the whole spectrum... very flexible.

    Details
    Doepfer A-129-1und2 Vocoder Analyse/Synthese
    former retail price €310.92 (VAT excl.) No longer available!
  137. Doepfer A-129-3 Vocoder Slew Limiter

    5x attenuator / offset generator with one common slew limiter CV input for processing 5 bands of the A-129 vocoder. Also suitable for other signals.

    Details
    Doepfer A-129-3  Vocoder Slew Limiter
    former retail price €92.44 (VAT excl.) No longer available!
  138. Doepfer A-141 VC-ADSR

    ADSR envelope generator with the possibility to control each parameter with a control voltage. Each CV input has an attenuator. The time range per A, D and R parameter range between 3ms and 20s. There´s a gate and retrigger input and an envelope output.

    Details
    Doepfer A-141  VC-ADSR
    former retail price €84.03 (VAT excl.) No longer available!
  139. Doepfer A-147 VC LFO

    phase-out model

    The A-147 is a LFO which frequency can be modulated with a control voltage. It provides a retrigger input, a CV input with attenuator and following waveforms: triangle, sine, symmetrical suare and falling sawtooth. Frequency range: 0.015Hz - 150 Hz.

    Details
    Doepfer A-147  VC LFO
    former retail price €71.43 (VAT excl.) No longer available!
  140. Doepfer A-171 VC Slew Limiter

    Two separate slew limiters for generating portamento effects. Abrupt changes of a signal can be "smoothed" this way.
    The steepness of the waveform´s slope can be controlled manually and with a control voltage.

    Details
    Doepfer A-171  VC Slew Limiter
    former retail price €50.42 (VAT excl.) No longer available!
  141. Doepfer A-174-1 Joy-Stick

    The joystick provides two analog control voltages that can be changed simultaneously with the lever. The A-174-1 can generate negative and positive voltages. For each axis (X and Y) there is a separate offset control which sets the desired lowest voltage to be generated.

    Details
    Doepfer A-174-1  Joy-Stick
    former retail price €100.84 (VAT excl.) No longer available!
  142. Doepfer A-190-1 Midi/CV-interface

    RUNNING OUT. Not in prouction anymore. Just a few units left.

    MIDI/CV-interface with CV output 1 (12bit) for pitch, free assignable CV output 2 (7bit), gate-, reset-, clock output. Internal clock divider and digital LFO that follows the MIDI clock. Glide, pitch bend and others switchable with MIDI commands.

    CAUTION! The module needs an additional 5V power supply!  For example Doepfer´s 5V adaptor (order number A-100AD5).

    Eurorack module, 10HP wide.

    Details
    Doepfer A-190-1  Midi/CV-interface
    former retail price €134.45 (VAT excl.) No longer available!
  143. ADDAC 101 - WAV player

    We don't offer this product anomore

    Sample player module that plays up to 72 samples (WAV file, 22kHz, 16Bit, mono) from a SD card! You can control following parameters manually or via CV: Loop size, file position, sample rate and optionally the amplitude due to the integrated VCA. An envelope follower is there as well. Different sounds can be accessed by skipping or randomizing playback files, which can also be accomplished both manually or through a CV input.

    Details
    ADDAC 101 WAV player - front
    former retail price €377.31 (VAT excl.) No longer available!
  144. Doepfer power supply, toroidal transformer, 1200mA (230V)

    Running out. Few in stock. Will be replaced by PSU3 in January 2016.

    Stabilized power supply with a toroidal transformer. Maximum current 1200mA per rail.
    This power supply is used in all Doepfer cases and thus is a correct spare part but might as well be used for creating your own power solution.

    CAUTION: Mounting only by qualified personnel only because of electrical safety (dangerous mains voltage 230V)

    Details
    Doepfer Netzteil, 1200mA, Montage nur Fachmann
    former retail price €84.03 (VAT excl.) No longer available!
  145. Doepfer Monster Case DUAL = 2x 4x168HP (230V)

    Not in production anymore.

    Two big 4x186HP wide monster flightcases for mounting 3U Eurorack-modules. Each of the two cases contains 4 power supplies with 1200mA power (230V mains), 8 bus boards and four rows at 168 HP. Total: 1344HP module space.

    Details
    Doepfer Monsterkoffer doppelt 2x672TE
    former retail price €2,016.81 (VAT excl.) No longer available!
  146. 4ms Auto Bass Generator BLANK PCB

    Blank PCB for building an Autonomous Bassline Generator. Components or a build description are not included, just the circuit board.

    Details
    4ms Auto Bass Generator BLANK PCB
    former retail price €10.08 (VAT excl.) No longer available!
  147. 4ms Atoner DIY kit

    Do-it-yourself kit for the 4ms Atoner. It contains all parts, a face plate and the unpopulated circuit board. Although the english manual explains the buildup process quite well you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms Atoner DIY kit
    former retail price €125.21 (VAT excl.) No longer available!
  148. 4ms pedals - Noise Swash

    One last unit in stock

    The Noise Swash is a chaotic random noise-maker and CV generator, generating its own sounds or working as an audio processor. As a stand-alone device it generates unpredictable continuously morphing oscillations on the Audio Output jack, and random CV fluctuations out the dual-direction "Mood CV" jack.

    Details
    4ms Noise Swash module
    former retail price €302.52 (VAT excl.) No longer available!
  149. 4ms PEG do-it-yourself kit

    The Pingable Envelope Generator as a DIY kit.

    All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite well but you still should bring some knowledge in electronics and soldering  skills.

    Details
    4ms PEG DIY kit
    former retail price €184.03 (VAT excl.) No longer available!
  150. 4ms Shuffling Clock Multiplier DIY KIT

    DIYers can build a 4ms Shuffling Clock Multiplier with this kit. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.

    Details
    4ms Shuffling Clock Multiplier  DIY kit
    former retail price €92.44 (VAT excl.) No longer available!

Items 151 to 300 of 448 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction