Each matrix works individually, has eight inputs and five outputs. The selection of routings is done with two buttons, the scaling via an encoder, Scaling for the audio section ranges from minus infinity to +10dB while the CV section goes from minus infinity to unity gain. The scaling encoders have a pushbutton function which either mutes the selected routing (both LEDs off) or sets it's level to unity gain (both LEDs on)
If an input is routed to several outputs the signal will be buffered and there is no voltage or signal drop, unlike when using stacked cables. If several inputs are routed to one output the result will be a mix of the inputs.
- Audio section (signal router): the scaling allows for amplifiying the input signal (up to approx +10dB). When exceeding unity gein only the red LED will light up. If you press the encoder the level will jump back to unity gain. The INPUT SOLO button will mute all inputs but the selected.
- CV section (control router): if several signals are put into one input socket (by stacking cables) only the signal with the temporarily highest amplitude will be read out. Very interesting when using several LFOs. /ul>
Control Router: eight audio inputs A-H, five audio outputs 1-5
CV Router: eight CV inputs A-H, five CV outputs 1-5
4U Buchla form factor module, one panel wide (17.8 x 10.8cm or 7" x 4.25")
This item is discontinued or sold out and no longer available, please feel free to look for comparable new stuff in the following categories.